07-31-2022, 07:28 PM | #57 |
Shadow Gray '19 ZLE M6
|
I will say the quickjack was one of the best purchases I ever made. It is important to check for any leaks / loose fittings and ensure the PSI is correct in the air cylinders. There is a maintenance / check before each use schedule in the manual. Always lift on level ground and with the two pieces as parallel as possible.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
08-07-2022, 02:09 PM | #58 |
Drives: 2021 LT1 Join Date: Aug 2020
Location: Chicago area
Posts: 286
|
|
10-09-2022, 06:48 PM | #59 | |
Drives: 2020 ZL1 1LE Join Date: Sep 2012
Location: Austin, Texas
Posts: 1,335
|
Quote:
__________________
2020 ZL1 1LE [Moroso SC Expansion Tank, otherwise stock]
|
|
10-09-2022, 11:17 PM | #60 |
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,031
|
It is VERY important you have everything centered and use only one block per lift point (if you use 2, they may slip)... If everything is centered and such it will be very stable, if you are sloppy setting it up it could end badly... Don't get complacent...
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph... |
10-10-2022, 08:19 AM | #61 |
Shadow Gray '19 ZLE M6
|
ZL1addons lift pads + QJ standard blocks
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
08-01-2023, 07:08 AM | #62 |
Drives: 2022 Camaro 2SS A10 Join Date: Jul 2022
Location: FL
Posts: 524
|
Here is a strange question for quick jack owners: Have you ever jacked up the car in the garage (in case of a possible flood from a hurricane?) Moving to FL and have never had to experience this, so just looking for alternatives to save the car if it does flood and not too deep.
But now I am thinking a 4 post lift may be better suited all around? Advantage Lifts?
__________________
2022 Camaro 2SS/ Whipple 3.0 / 2"Headers/ PRC LTX Heads/ Forged Internals/LT4 fueling/ DSX Aux/
DSX Flex Fuel/ Meth Injection/ Katech 112 TB/ RotoFab Big Gulp/ Corsa NPP/ Various exterior mods Last edited by adamjwilson; 08-01-2023 at 07:57 AM. |
08-01-2023, 05:21 PM | #63 | |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
Quote:
4 post wins every day.
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
|
08-01-2023, 07:06 PM | #64 |
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 828
|
BE CAREFUL WITH SOME OF THE ADD ON BLOCKS. ONLY USE THE ONES WITH THE SET SCREWS. BE SURE THEY ARE TIGHT. IT CAN ROLL OFF THOSE
|
08-01-2023, 07:14 PM | #65 |
Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023
Location: Calgary Canada
Posts: 1,483
|
Yes, I was very paranoid of that happening so I built some attachments to fit the quick jack blocks that slot into the pinch weld did this before I bought some of the clamp on lift pads
|
|
|
Post Reply
|
|
|