06-12-2020, 05:51 PM | #29 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 904
|
Sorry for the confusion, I'm in for whatever the group wants. Can someone drive the bus here and lay down the meeting spot, time, and route?
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
06-12-2020, 06:37 PM | #30 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Ok let me take this one because it was my idea. 11AM Chik fil A on 22 in Philipsburg. Roll out around 11:30 and head up 519 towards Colesville. It’s less than 50 miles but I will check. Depending on traffic we may get to Colesville around 1PM. I am not aware of a particular spot to stop so I will research this and post within an hour. We can grab some food locally and if there is something along the way of interest we can stop and takes some pics too. Idea would be to rotate lead car because I have several Go Pro and it would be nice to get some rolling shots on the way up. Once we get there we can navigate back on 519 or I believe 206. I will check that out. Stay tuned.
|
06-12-2020, 07:21 PM | #31 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
https://goo.gl/maps/amZntJKdvEXvbEcEA
From the Chik fil A, we would follow County Rd 519 towards Colesville. It’s 1 hour 22 minutes from Alpha. If anyone want to grab a bite before heading out there is Chik filA, Panera Starbucks We should get to Colesville around 1PM According to the map we take 519 until it merges to 661 and 94 in Newton. Continuing on 519 aka Newton Halsey Rd towards Colesville. Final destination point might be High Point State Park. Last edited by crossroaddemons; 06-12-2020 at 07:32 PM. |
06-12-2020, 07:26 PM | #32 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
https://www.chick-fil-a.com/locations/nj/phillipsburg
Starting point a Chik fil A 11:00 meet up 11:30 roll out. |
06-13-2020, 09:43 AM | #33 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Doing a bit more research there is an option of crossing over into NY heading towards Port Jervis rather than the State Park. We can determine whether or not we want to press on and follow Rt 6 to 97 which runs alongside the river. 97 has some twisters and long curves which a few bike enthusiasts have said is worth the drive. Just some other things to consider. Looks like we currently have 4 people unless I am mistaken. I posted it on Camaro 6th Gen and the ZL1 Exclusive page but no responses yet. Weather is looking great. Can’t imagine missing out this time. Are we still set with just the four of us? Anyone?
|
06-13-2020, 02:52 PM | #34 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Looks like only RotoRocker and LiqTenQ so maybe just 3. Need some responses here please. If you aren’t going please weigh in since it’s less than a day away. Thanks
|
06-13-2020, 07:35 PM | #35 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,211
|
Sorry was super busy today pouring concrete. I'm about hr and change from meeting spot. I have an appointment tomorrow at 9 for an estimate if I finish ontime to make it there at 11 count on me. I'll keep you guys posted tomorrow morning.
|
06-13-2020, 08:13 PM | #36 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Hope you make it. 11:30 we would roll out of Chik filA. You should have time. Pm me and we can exchange cell number.
|
06-13-2020, 09:22 PM | #37 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,499
|
I can't join you guys this time, still waiting for my replacement wheel (running the stockers temporarily) and the day is booked up already, but will keep a tab on this.
Car is now fixed except for the wheel, entire front end is brand new and now Xpel'd (sigh).
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
06-13-2020, 10:26 PM | #38 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Thanks for responding
|
06-14-2020, 07:44 AM | #39 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 904
|
Hey guys, I can't make it today. I will also be busy the weekend of 6/27.
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
Last edited by LiqTenExp; 06-16-2020 at 04:26 PM. |
06-14-2020, 08:07 AM | #40 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
|
06-14-2020, 09:11 AM | #41 |
Drives: 1971 Chevy Camaro Join Date: Dec 2016
Location: Beacon, NY
Posts: 736
|
Heading to Chik filA
|
06-14-2020, 09:21 AM | #42 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,211
|
I should be there be 11:30
|
|
|
Post Reply
|
Thread Tools | |
|
|