IKONMOTORSPORTS ZL1 1LE BUMPER - Page 3

RobertAvitia · 03-20-2018, 09:43 PM

Quote:

Originally Posted by DarkFangz1100

So, my key question is in regards to the grill badge...Does it come installed and did you remove it or is it a separate piece?

It didn’t come with a badge. It has the mounting for it but doesn’t have a emblem on it

RobertAvitia · 03-20-2018, 09:45 PM

Quote:

Originally Posted by MR-02

Hey Avitia thanks for sharing all the info!
Is there a way to make the front edge of the hood line up with the height of the new bumper?

Lines up just like the oem bumper

MR-02 · 03-22-2018, 03:49 PM

Hey Thanks, can you show a photo of looking down the leading edge of the hood, where it meets the bumper...like the view you would see from inside the car, from the copy of your photo below, it looks like it doesn't line up ....too high in height from the side view at the centre portion of the bumper........

01pewterz28 · 03-22-2018, 10:14 PM

Quote:

Originally Posted by MR-02

Hey Thanks, can you show a photo of looking down the leading edge of the hood, where it meets the bumper...like the view you would see from inside the car, from the copy of your photo below, it looks like it doesn't line up ....too high in height from the side view at the centre portion of the bumper........

He should be able to adjust the 4 bumper stops to make it flush.

MR-02 · 03-23-2018, 03:23 PM

Quote:

Originally Posted by 01pewterz28

He should be able to adjust the 4 bumper stops to make it flush.

What or where are the bumper stop bolts? How would that work? Can someone provide a copy of the install instructions anywhere-I cant find it on google or on the ikon motorsports website.

01pewterz28 · 03-24-2018, 12:09 AM

Quote:

Originally Posted by MR-02

What or where are the bumper stop bolts? How would that work? Can someone provide a copy of the install instructions anywhere-I cant find it on google or on the ikon motorsports website.

Here you go adjust these to make the hood level

NewCamaroOrder · 03-26-2018, 03:39 PM

If the adjustment is more than minor, the hood latch can be adjusted a little also.

01pewterz28 · 03-27-2018, 11:20 AM

Any updates OP you get the bumper painted yet?

RobertAvitia · 03-31-2018, 06:42 PM

So after some time I’ve finally figured out if the zl1 flowtie grill will fit this bumper and I’ve come The the conclusion of YES!! It will. So I got my old upergrill and compared it to the one ikon provides and all the mounting clip holes line up with the stock grill. So since the flowtie grill is a direct swap with the stock grill, it’ll work with the ikon bumper

RobertAvitia · 03-31-2018, 06:43 PM

Oh ya, bumpers getting picked up from paint on Monday ��

01pewterz28 · 04-01-2018, 12:05 AM

Quote:

Originally Posted by RobertAvitia

Oh ya, bumpers getting picked up from paint on Monday ��

Cool looking for ward to it.

Looks like I might go this route with the AA ZL1 hood.

RobertAvitia · 04-01-2018, 12:21 AM

Quote:

Originally Posted by 01pewterz28

Cool looking for ward to it.

Looks like I might go this route with the AA ZL1 hood.

Dido. Waiting for then to release is to see how accurate it is to the real thing

Want1 · 04-03-2018, 04:53 PM

Looks great!
Thanks for all the info!

Drsagacity · 04-04-2018, 11:03 PM

Would this front work with the Maggie? Is the splitter connected or separate? I already have a splitter on my SS.

03-22-2018, 03:49 PM	#31
MR-02 Drives: 2016 2SS M6 Join Date: Feb 2011 Location: ONT Posts: 185	Hey Thanks, can you show a photo of looking down the leading edge of the hood, where it meets the bumper...like the view you would see from inside the car, from the copy of your photo below, it looks like it doesn't line up ....too high in height from the side view at the centre portion of the bumper........ __________________ 2016 SS M6

03-27-2018, 11:20 AM	#36
01pewterz28 #TeamBeckyD Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008 Location: Apopka, FL Posts: 10,496 View My Garage	Any updates OP you get the bumper painted yet? __________________ #TeamBeckyD FIFTY HBM 2SS VERT

03-31-2018, 06:42 PM	#37
RobertAvitia BYND GARAGE Drives: 17' 1LT Turbo Join Date: Feb 2016 Location: CA Posts: 667	So after some time I’ve finally figured out if the zl1 flowtie grill will fit this bumper and I’ve come The the conclusion of YES!! It will. So I got my old upergrill and compared it to the one ikon provides and all the mounting clip holes line up with the stock grill. So since the flowtie grill is a direct swap with the stock grill, it’ll work with the ikon bumper Attached Images __________________ https://m.youtube.com/#/c/BEYONDGARAGE http://instagram.com/bynd_ltg

03-31-2018, 06:43 PM	#38
RobertAvitia BYND GARAGE Drives: 17' 1LT Turbo Join Date: Feb 2016 Location: CA Posts: 667	Oh ya, bumpers getting picked up from paint on Monday �� __________________ https://m.youtube.com/#/c/BEYONDGARAGE http://instagram.com/bynd_ltg

04-04-2018, 11:03 PM	#42
Drsagacity Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018 Location: Swansea, IL Posts: 1,219	Would this front work with the Maggie? Is the splitter connected or separate? I already have a splitter on my SS. __________________ 2017 Camaro 2SS vert - Nightfall Gray Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance

03-26-2018, 03:39 PM	#35
NewCamaroOrder Drives: 2017 Camaro 2SS Nightfall Gray 1LE Join Date: Mar 2017 Location: SoCal Posts: 86	If the adjustment is more than minor, the hood latch can be adjusted a little also.

04-03-2018, 04:53 PM	#41
Want1 Drives: 2017 Camaro SS 1LE Join Date: Jul 2017 Location: Phoenix, AZ Posts: 127	Looks great! Thanks for all the info!

User Name		Remember Me?
Password