04-22-2021, 05:04 AM | #15 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
There’s a 1LE setup in the Suspension an brakes sub forum.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
04-22-2021, 12:25 PM | #16 |
Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,208
|
|
04-22-2021, 04:17 PM | #17 |
Drives: '23 1SS 1LE | '18 1LS V6 [sold] Join Date: Jul 2020
Location: Los Angeles, CA
Posts: 114
|
Oooh, you got the brake pads for Brembo 4-piston calipers, I see. EDIT: I stand corrected, JL9 is the code for single-piston brakes Last edited by Xyebo; 04-25-2021 at 08:03 PM. |
04-23-2021, 08:54 AM | #18 |
Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,208
|
J55 - Brakes, Brembo 4-piston front, performance, 4-wheel antilock, 4-wheel disc
J6G - Brakes, Brembo 4-piston front and rear, performance, 4-wheel antilock, 4-wheel disc J6H - Brakes, Brembo 6-piston front and 4-piston rear, performance J6M - Brakes, Brembo Red, 6-piston front monobloc calipers, 4-piston rear calipers, 2-piece rotors, performance JF5 - Pedals, sport alloy JL9 - Brakes, 4-wheel antilock, 4-wheel disc JL9 code is for the single piston style. The part numbers are not in their online cat Danny had to look these up. I told him my RPO code and what I planned on doing with them. He said these would work best with OEM rotors and occasional track use and not daily drivers. They are bedding them and I should see them tomorrow. |
04-23-2021, 09:56 AM | #19 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
An J57 should be the CCM Rotors, calipers, and pads.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
Post Reply
|
|
|