11-12-2018, 01:03 PM | #15 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
Race stars are little heavier then advertised. I had a set on my 4th gen...they are good for the price. Could be tire selection...I know Hoosiers tend to be lighter then Mickey's. For example the DR2 is 10lbs lighter a tire then the Street R in the same size. Either way the car is going to go faster. 10.4 is my guess.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
11-12-2018, 02:42 PM | #16 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
My Race Stars are pretty much as advertised. 17x4.5 are 17 lbs and 17x9.5 are 19 lbs. Don't like the shank style lugs but the wheels are priced right compared to welds. A two piece wheel is always going to be higher in price then a 1 pc cast style wheel.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-12-2018, 07:49 PM | #17 |
Tactical Garage
Drives: 2016 Camaro 2SS Join Date: Nov 2016
Location: Idaho
Posts: 427
|
I have the race star 17/10.5 with the mt street SS, when I weighed them it was about the same as the stock set up, which makes sense the SS are supposed to be 8lbs heavier than the Rs.
I am looking at getting the same skinny set up as you in the spring, it looks like it will save me about 46lbs of rolling weight. I gotta cut some weight, the race weight on some of the NA cars is 300lbs less than the weight I run at. Gives me something to do over the winter. |
11-17-2018, 11:00 AM | #18 | |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
Quote:
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
04-01-2019, 05:23 AM | #19 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Finally made it to the track this past Saturday 03/30/18. RPM out of Wilmington DE had a late model shootout at Cecil County in MD. My previous PB on street tires was 1.738 60ft, 10.871 @ 128.93.
Since then I have added 2" kooks, RF big gulp & NW103, retuned at CSP which it made 653/618. Also this was the first time out on my drag pack: Front Wheels: Race Star 92's 17x4.50 5x120BC 1.75"BS GLOSS BLACK Tires: M/T ET FRONT 27.5/4.0-17 Rear Wheels: Race Star 92's 17x10.5 5x120BC 7" BS GLOSS BLACK Tires: M/T ET STREET R BIAS 28x11.5-17. This is my first experience on DR's with a manual with this much HP. I was really happy to improve, although I was hoping for better. I need some more practice to get the 60ft down. The MPH is there for a 10.50 pass, just need to cut .1 from that 60ft and I should be there. I was probably the slowest car in the class, and in the final 4 I was taken out by a 9.50 CTSV from RPM with a maggie and NOS. But it was so much fun to be at the track on a beautiful day making passes. Best Pass to date: 10.705 @ 131.92mph
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 Last edited by Jhunsberger; 04-01-2019 at 10:07 AM. |
04-01-2019, 06:03 AM | #20 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I think your doing great, I would consider buying a lowering kit and dropping your ride 1.5 inches and I use the phastech kit. My car has always mph'd better then most and I believe its Aero. My car launches just as hard and have had 1.45 60ft as my best so far on the old motor.
https://www.phastekperformance.com/P...prings-px1.htm
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-01-2019, 06:16 AM | #21 | |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Quote:
Good luck and have fun in GA!
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 Last edited by Jhunsberger; 04-01-2019 at 06:29 AM. |
|
04-01-2019, 09:59 AM | #22 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I just switched over to the 305-45-17R radial. Hope they hook this coming weekend in Atlanta. I think you can get in the 1.50's with just some more track time.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-01-2019, 10:02 AM | #23 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Funny, I just noticed you got your wheel from Kent's, I got my full setup from him, he was good to work with.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
04-01-2019, 03:12 PM | #24 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I know Mike very well. My Camaro was on their catalog a couple year ago with a 69 Camaro. I ran their wheels with Hoosiers over the last couple years. Decided it was time for a change. The only difference is I went with the 10.5 wheels this year and then had the face machined from 7.00 to 7.40 for the back space, really tucks the tires. My car really leaves with the tires tucked way up inside so I wanted to make sure no issues as I did with the 9.5 rear wheels before. I went from the 6.00 bs like you have to 6.40 bs.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-02-2019, 03:25 PM | #25 | |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
Quote:
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! |
|
04-02-2019, 06:12 PM | #26 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
beautiful car, it looks badass on that drag setup. the hp times and comparison seems odd, though. 417 whp it went 116. 653 whp it went 128. 12 mph gain from almost 250 whp? that is suspect, at best. i’ve seen mid teen cars spray 150 first hand and go 130. just curious, something doesn’t add up.
i’m really struggling with which direction to go, blower or na. i feel like both would trap similar but the blower would be the cheapest and easiest route. lots of 540 whp cam only cars going 130+. |
04-03-2019, 05:28 AM | #27 | |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Quote:
On street tires I went 10.87 @ 128 with 620rwhp On my drag pack I went 10.70 @ 132 with 653rwhp check out group (5): https://www.camaro6.com/forums/showthread.php?t=427506
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
|
04-03-2019, 05:54 AM | #28 | |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,692
|
Quote:
|
|
|
|
Post Reply
|
|
|