04-03-2016, 07:15 PM | #7477 |
Drives: 2014 ZL1 Join Date: Apr 2016
Location: Iowa
Posts: 28
|
New member from Ames
hello all,
New member; just bought a 14 ZL1, black, 6sp 1900 miles. Bought in Ankeny, supposed to be one owner, anyone here? Looking forward to getting involved in some local events, any car shows, get togethers, etc? Thanks, Mike |
04-03-2016, 07:25 PM | #7478 |
Drives: 2014 ZL1 Join Date: Apr 2016
Location: Iowa
Posts: 28
|
Another question, I am new to Iowa, and the fact they require a front plate. I see from some of your pics, that a few of you do not have a front plate on your car.
Are the cops bad a ticketing if you don't have the front plate on? Generally ok not to put on? Any advice would be helpful, as my car does not currently have it on, and would like to keep it that way if possible. Thanks Mike |
04-03-2016, 09:10 PM | #7479 |
2018 Garnet Red ZL1 conve
Drives: 2013 & 2018 ZL1 vert Join Date: May 2009
Location: Des Moines, IA
Posts: 1,471
|
Mike,
Get the retractable or removable plate so you don't have to drill into the front bumper. Get from JDPmotorsports.com or Phastek.com. Mine works like a charm, I can't remember where I got it though. Several options out there for you to choose from. Hope to see you at Karl's Performance for his first cars & coffee this saturday morning. Bill
__________________
Build Thread: 2018 ZL1 Vert Purchased (Overpar73)
|
04-04-2016, 06:39 AM | #7480 |
|
http://jacfab.com/products/camaro-pr...plate-bracket/
Ive never been stopped for no front plate. I know some have in the Waterloo area.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
04-04-2016, 06:43 PM | #7481 |
Drives: 2013 ZL1 Convertible Join Date: May 2010
Location: Cedar Rapids Iowa
Posts: 230
|
welcome,congrats on your purchase.Great car!
|
04-04-2016, 09:03 PM | #7482 |
Drives: 2010 Camaro SS/RS CGM Join Date: Dec 2011
Location: Oskaloosa, IA
Posts: 627
|
I run without a front plate. I got it on a jacfab frame so that when i do get pulled over i just say oops i took it off for a car show. I have been pulled over twice last year but one guy said he wanted to get a closer look of my car never ticketed tho.
|
04-08-2016, 07:27 PM | #7483 |
Drives: 2014 ZL1 Join Date: Apr 2016
Location: Iowa
Posts: 28
|
Its a drive in car show more or less, Karls Performance shop is hosting it, they have coffee and donuts, and people come by to check out the shop as well as see what other people drive in with.
I have not been there before, so will probably go Saturday morning to check it out, hopefully meet some people. |
04-09-2016, 06:43 AM | #7484 | |
Drives: 2014 Camaro Zl1 Tripple Black! Join Date: Nov 2014
Location: Iowa
Posts: 383
|
Quote:
|
|
04-09-2016, 05:59 PM | #7485 |
Drives: 2014 ZL1 Join Date: Apr 2016
Location: Iowa
Posts: 28
|
Went by Karl's performance today for the cars and coffee. I don't know the history behind this shop, as I am new to the area, but from my perspective, was very impressed with the shop. They had many cars inside that they seemed to be working on, from a twin turbo 5th gen camaro, to a Porsche GT3 and several vetts, and many others.
Don't know how there work is or service, but the shop was sure nice. |
04-13-2016, 08:30 AM | #7486 |
Drives: 2010 Camaro 2SS/RS L99 "The Reaper" Join Date: Jan 2014
Location: Cedar Falls, Ia
Posts: 44
|
Anyone interested in trading a set of V6 rear brakes for Brembos? I am looking to get more into drag racing and so I am willing to do a straight trade of my rear brembo calipers, pads, rotors, and lines with someone that has calipers, rotors, pads, and lines for a V6. I am located in cedar falls, would be willing to drive a little. Also I can do the actual hard part swap in cedar falls if anyone does not have the tools or know how.
__________________
2010 Camaro 2SS/RS, L99
MODS: Texas Speed 1 7/8" long tubes, not cats | Borla S-type catback with X pipe | K&N Typhoon intake | FBM Tune | B&M 20,000btu tranny cooler | BMR split drop lowering springs | 20" black chrome Havoc wheels | gloss black calipers | smoked tail lights | black bowties | 25% window tint | debadged Best time slip: 12.902 @107.24mph 1.964 60' |
04-16-2016, 01:00 PM | #7487 |
|
Anybody that is interested there will be a cruise tomorrow Sunday April 17th. It's starting off at Lindale Mall and I think it will be leaving at 1230pm. I was looking at the route someone made on google and its roughly 80 miles. There will be stops at some locations for food. Everyone is welcomed to come out and its not limited to Camaros only. Last I saw there is about 60 people attending and a little over 100 interested.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
04-28-2016, 08:40 PM | #7488 |
Drives: 2010 Camaro 1SS Join Date: Mar 2015
Location: Iowa
Posts: 536
|
Has anyone ever dealt with Sublime Speed Technology in Omaha, NE? They have a dyno and have some pretty impressive cars on there facebook page.
__________________
Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper,
11/30/17 | Club F1FTY |
05-02-2016, 08:29 PM | #7489 | |
HARD WORKING PATRIOT
Drives: 2011 CAMARO 2SS RS-AUTO Join Date: Oct 2010
Location: IOWA
Posts: 367
|
Quote:
Good to hear your interested in straight track Most cars would nit need the V6 brakes. Stock can get you down to 17" rims which is plenty to get you into the low tens, depending on launch torque. if you were a manual or high stall, with 390/410 gears, or a PD blower - then more reasonable- but still not absolutely necessary. Its more about driver mod and proper tune. See you out there.
__________________
Long time avid daily reader -thanks to all for your helpful threads!
Bolt ons, Stock Torq Converter - 11.810 & 116.21 |
|
05-04-2016, 09:37 AM | #7490 |
Drives: 1977 Type LT Rally Sport Join Date: Sep 2013
Location: West Des Moines
Posts: 32
|
The Kansas City Camaro Club is again planning a cruise to Camaro's Steakhouse in Bethany Missouri on May 14th. I have already made other plans that day so I won't be going or planning the cruise from the Des Moines area.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Properautocare Coupon Sale for Camaro5 Members | Angelo@Autopia | Wash/Wax/Detailing and Cosmetic Maintenance Parts | 2 | 12-11-2009 09:38 AM |
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!! | ZZcamaro | Forced Induction | 64 | 10-19-2009 12:16 PM |
Messages to more than 5 members & Social Groups | heinzd01 | Site Related Announcements / Suggestions / Feedback / Questions | 5 | 09-16-2009 08:22 AM |