SECONDARY CAT DELETE QUESTIONS - Page 13

GTSLOW · 06-05-2018, 12:55 PM

Quote:

Originally Posted by ninetres

Yes. Look under your car broski.

Oh yes I see it now lol! What a bizarre design. One side clamps and one side has a flange...

Thanks brosof.

Sibze · 06-21-2018, 11:09 PM

Sorry... a lot of info in here. Does the Borla also delete the AFMs and if so, does that through a code?

bullet3z · 06-22-2018, 12:22 PM

Quote:

Originally Posted by Sibze

Sorry... a lot of info in here. Does the Borla also delete the AFMs and if so, does that through a code?

Borla part # 60606 is for the manual transmission vehicles without the AFM.

Borla part numbers 60609 and 60610 are for the automatic transmission vehicles. They have the AFM.

Booher · 06-22-2018, 03:07 PM

Does anyone in vegas know any shops that would do a secondary cat delete? No one in my city, lake havasu az, will touch it and that's the nearest big city to me

Ventmaster · 06-24-2018, 03:22 PM

Quote:

Originally Posted by Booher

Does anyone in vegas know any shops that would do a secondary cat delete? No one in my city, lake havasu az, will touch it and that's the nearest big city to me

I expect you can find a shop in Vegas Booher, but I really think you'd be better off with Borla's 60663 and a pair of Vibrant's 1176- https://www.summitracing.com/parts/vpe-1176

DynoSteve at RDP can get you the Borla for $314 (or less) and the clamps will run you $50. If necessary you can always put the stock cats back and re-use the same clamps (1176) to return to stock configuration.

Jack that bad boy up and have some fun! No one will be the wiser and your car will sound amazing!

Booher · 06-24-2018, 03:39 PM

Yah, no luck on any shops. I didn't know that part existed, that's definitely my answer, thankyou sir!

Ventmaster · 06-24-2018, 03:50 PM

You won't regret it. Here's RDP's info-https://www.rdpstore.com/p-12059-camaro-ss-2016-2018-cat-delete-pipe-275-60663.aspx
Use their current Promo Code and save 10%- md10d.

bullet3z · 06-24-2018, 06:06 PM

Quote:

Originally Posted by Ventmaster

You won't regret it. Here's RDP's info-https://www.rdpstore.com/p-12059-camaro-ss-2016-2018-cat-delete-pipe-275-60663.aspx
Use their current Promo Code and save 10%- md10d.

Call Steve by phone. He is nice to talk to. He gives forum members here a little better discount. That is who I got my system from.

IH8WNTR · 06-24-2018, 07:58 PM

Quote:

Originally Posted by Ventmaster

You won't regret it. Here's RDP's info-https://www.rdpstore.com/p-12059-camaro-ss-2016-2018-cat-delete-pipe-275-60663.aspx
Use their current Promo Code and save 10%- md10d.

I just did this myself. He gave a good deal and parts should arrive this week for me.

ssmike · 06-24-2018, 08:32 PM

Quote:

Originally Posted by Ventmaster

I expect you can find a shop in Vegas Booher, but I really think you'd be better off with Borla's 60663 and a pair of Vibrant's 1176- https://www.summitracing.com/parts/vpe-1176

DynoSteve at RDP can get you the Borla for $314 (or less) and the clamps will run you $50. If necessary you can always put the stock cats back and re-use the same clamps (1176) to return to stock configuration.

Jack that bad boy up and have some fun! No one will be the wiser and your car will sound amazing!

If I’m not mistaken the 60663 is a complete cat delete (primary and secondary). The question was about doing a secondary cat delete in Vegas. I don’t think Borla has a secondary delete kit yet. Correct me if I’m wrong.

TMS · 06-24-2018, 09:27 PM

Quote:

Originally Posted by ssmike

If I’m not mistaken the 60663 is a complete cat delete (primary and secondary). The question was about doing a secondary cat delete in Vegas. I don’t think Borla has a secondary delete kit yet. Correct me if I’m wrong.

60663 is just a secondary cat delete for the SS (2.75"). 60626 is also just a secondary cat delete for the ZL1 (3").

ssmike · 06-25-2018, 06:23 PM

Quote:

Originally Posted by TMS

60663 is just a secondary cat delete for the SS (2.75"). 60626 is also just a secondary cat delete for the ZL1 (3").

OK thanks for the correction!

Ventmaster · 06-26-2018, 10:35 AM

Quote:

Originally Posted by Booher

Yah, no luck on any shops. I didn't know that part existed, that's definitely my answer, thankyou sir!

That's because it hasn't existed for very long. I have to acknowledge David Borla's promise to make this happen in this thread- see post #104.

Thank you sir for following through and making good on your statement!

ssmike · 06-28-2018, 07:14 AM

I crawled under the car yesterday to look at what it would take to install the 60663 and I'm wondering if the sleeve clamps will work. There isn't much pipe between the last bend and the brace that's welded between the stock pipes for the clamp to fit. After the welded brace there's OE dents for clearance so that wouldn't work. Has anyone done this install?

06-21-2018, 11:09 PM	#170
Sibze Drives: 2019 Camaro ZL1 Join Date: Apr 2017 Location: Ontario Posts: 161	Sorry... a lot of info in here. Does the Borla also delete the AFMs and if so, does that through a code?

06-22-2018, 03:07 PM	#172
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 979	Does anyone in vegas know any shops that would do a secondary cat delete? No one in my city, lake havasu az, will touch it and that's the nearest big city to me

06-24-2018, 03:39 PM	#174
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 979	Yah, no luck on any shops. I didn't know that part existed, that's definitely my answer, thankyou sir!

06-24-2018, 03:50 PM	#175
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 2,869	You won't regret it. Here's RDP's info-https://www.rdpstore.com/p-12059-camaro-ss-2016-2018-cat-delete-pipe-275-60663.aspx Use their current Promo Code and save 10%- md10d.

06-28-2018, 07:14 AM	#182
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,840	I crawled under the car yesterday to look at what it would take to install the 60663 and I'm wondering if the sleeve clamps will work. There isn't much pipe between the last bend and the brace that's welded between the stock pipes for the clamp to fit. After the welded brace there's OE dents for clearance so that wouldn't work. Has anyone done this install?

User Name		Remember Me?
Password