ZL1 stone/splash guards - Page 3

Badgerbimmer · 05-31-2018, 07:42 AM

Quote:

Originally Posted by ZED SLED

Anyone know where to get or have a part # for the longer wheel liner pins? I have a set front guards but was hoping to find these pins before install.

This?

greaser2 · 05-31-2018, 10:18 AM

I painted my ZL1 adds on a metallic black to match the rest of the mosaic black trim. At least the not tire facing side.

Krowser · 05-31-2018, 02:35 PM

Quote:

Originally Posted by ZED SLED

Anyone know where to get or have a part # for the longer wheel liner pins? I have a set front guards but was hoping to find these pins before install.

2 Fender Liner Retainer - GM (21030249)

This is the fender pin liner that comes with the 2017 - 2018 Camaro ZL1

You will need to separate the male and female fender pin liner attachments to use for ZL1 Addons premium rock guards.

1. place the female socket into the wheel liner hole until it ALMOST locks in place to the fender frame hole bracket
2. attach the ZL1 Addons rock guard to the wheelwell per ZL1 Addons instructions
3. line up the correct hole on the female opening to the rock guard
4. insert the male pin into ZL1 Addons rockguard hole and push until closed

meSSohappy · 06-24-2018, 10:07 AM

I have the same issue as all posted with the front...I’m ok with it. EXTREMELY PISSED about the fitment on the rear. Doesn’t fit all. It’s not just the gap at the bottom but the top of the rear flap is poorly misaligned with the fender and the entire flap does not sit flat on the body. When it’s attached the inside edge is forced to the wheel liner which pulls the outside edge away from the body. It appears to be angled. I should’ve taken a pic but I was soooo pissed I took em off and threw them aside. Can you guys please post a pic of your flap showing the entire flap. Front side and rear views would be greatly appreciated.
I also tried making my own spacers but didn’t help. I spent hours trying to make this work. Not happy.
Thanks in advance.

meSSohappy · 06-24-2018, 10:16 AM

https://acscomposite.com/products/ro...eid=baf54be425

These look like a better alternative but pricey.

Stephen12ZL1 · 06-24-2018, 12:34 PM

Quote:

Originally Posted by meSSohappy

I have the same issue as all posted with the front...I’m ok with it. EXTREMELY PISSED about the fitment on the rear. Doesn’t fit all. It’s not just the gap at the bottom but the top of the rear flap is poorly misaligned with the fender and the entire flap does not sit flat on the body. When it’s attached the inside edge is forced to the wheel liner which pulls the outside edge away from the body. It appears to be angled. I should’ve taken a pic but I was soooo pissed I took em off and threw them aside. Can you guys please post a pic of your flap showing the entire flap. Front side and rear views would be greatly appreciated.
I also tried making my own spacers but didn’t help. I spent hours trying to make this work. Not happy.
Thanks in advance.

I put mine on the rear and never judged them ro be angled in any way. I will snap a pic or two later today.

DRGNZ · 06-24-2018, 01:20 PM

Quote:

Originally Posted by meSSohappy

https://acscomposite.com/products/ro...eid=baf54be425

These look like a better alternative but pricey.

I am with you on these, mine are on and angled, not good. I like the ACS ones, might have to go with those.....

URBAN LEGEND · 06-24-2018, 01:21 PM

Some cuts in here.

http://www.tintzoom.com/Paint-Protec...its-s/1443.htm

meSSohappy · 06-24-2018, 10:29 PM

Quote:

Originally Posted by Stephen12ZL1

I put mine on the rear and never judged them ro be angled in any way. I will snap a pic or two later today.

Thx man. Appreciate it.

meSSohappy · 06-24-2018, 10:30 PM

Quote:

Originally Posted by DRGNZ

I am with you on these, mine are on and angled, not good. I like the ACS ones, might have to go with those.....

If you decide that do the ACS let me know. I emailed Joe today about them. Maybe get a group deal.

Vtor_ZL1 · 06-24-2018, 10:42 PM

ZL1-addons rear rock guard needs longer spacers to fit better and longer bolts as results. IIRC 1" spacers at 2 top locations, and longer of included spacer at bottom.

meSSohappy · 06-24-2018, 11:31 PM

Quote:

Originally Posted by Vtor_ZL1

ZL1-addons rear rock guard needs longer spacers to fit better and longer bolts as results. IIRC 1" spacers at 2 top locations, and longer of included spacer at bottom.

Yup. Tried this. But alignment is way out.

waterman · 06-25-2018, 03:47 AM

Quote:

Originally Posted by meSSohappy

If you decide that do the ACS let me know. I emailed Joe today about them. Maybe get a group deal.

I may be interested in an ACS group deal. Product advertised on their website is SS/RS fitment. I believe that the ZL1/ZLE fitment may be different?

If it is not an issue, since you have a relationship with Joe at ACS, can you confirm that ACS gloss painted pieces match OEM splitter, rocker panels and diffuser?

Thanks in advance. Please keep us posted.

7LitreC5 · 06-25-2018, 07:27 AM

Thanks, I've been looking for a kit for the ZL1.

I put Cleartastic on my Stingray but they don't have a kit available for the ZL1.

Quote:

Originally Posted by URBAN LEGEND

Some cuts in here.

http://www.tintzoom.com/Paint-Protec...its-s/1443.htm

06-24-2018, 10:07 AM	#32
meSSohappy Drives: 2018 ZL1 A10 Join Date: May 2012 Location: British Columbia, Canada Posts: 1,372	I have the same issue as all posted with the front...I’m ok with it. EXTREMELY PISSED about the fitment on the rear. Doesn’t fit all. It’s not just the gap at the bottom but the top of the rear flap is poorly misaligned with the fender and the entire flap does not sit flat on the body. When it’s attached the inside edge is forced to the wheel liner which pulls the outside edge away from the body. It appears to be angled. I should’ve taken a pic but I was soooo pissed I took em off and threw them aside. Can you guys please post a pic of your flap showing the entire flap. Front side and rear views would be greatly appreciated. I also tried making my own spacers but didn’t help. I spent hours trying to make this work. Not happy. Thanks in advance. __________________ DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race

06-24-2018, 10:16 AM	#33
meSSohappy Drives: 2018 ZL1 A10 Join Date: May 2012 Location: British Columbia, Canada Posts: 1,372	https://acscomposite.com/products/ro...eid=baf54be425 These look like a better alternative but pricey. __________________ DAVENPORT STAGE 2 PLUS - 2" ARH ceramic coated headers - 3" ARH catless exhaust - Stock NPP mufflers - Kong ported SC - Katech 103 ported TB - Rotofab 5" Big gulp CAI - 22.5% lower pulley - ATI Harmonic balancer - Cordes SC expansion tank - MSD hi temp ignition wires - Koolsox spark plug insulators - custom tunes - 660hp/725tq pump - 713hp/763tq race

06-24-2018, 01:21 PM	#36
URBAN LEGEND Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013 Location: Brenham, TX Posts: 3,517	Some cuts in here. http://www.tintzoom.com/Paint-Protec...its-s/1443.htm __________________ 🔺22 RS E TRON GT 🔺21 Model S Plaid

06-24-2018, 10:42 PM	#39
Vtor_ZL1 Who Needs to KNOW? Drives: 18 ZLE Join Date: May 2018 Location: Left Side of the Moon Posts: 1,770	ZL1-addons rear rock guard needs longer spacers to fit better and longer bolts as results. IIRC 1" spacers at 2 top locations, and longer of included spacer at bottom. __________________ ing for grip. Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/

05-31-2018, 10:18 AM	#30
greaser2 Drives: 2017 A10 ZL1 KG Join Date: Oct 2014 Location: Porter TX Posts: 315	I painted my ZL1 adds on a metallic black to match the rest of the mosaic black trim. At least the not tire facing side.

User Name		Remember Me?
Password