Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 03-18-2023, 07:47 AM   #15
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
I received mine today. I already had the t87 swap but got the t93 to play with. Hp tuners claims there are tables that can’t be seen with the t87 that the t93 has. I’m planning on swapping them out shortly and reading it.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 08:52 AM   #16
lt4camaro


 
lt4camaro's Avatar
 
Drives: 2021 LT1 10 speed auto
Join Date: May 2013
Location: Connecticut
Posts: 2,343
Quote:
Originally Posted by JP374 View Post
I received mine today. I already had the t87 swap but got the t93 to play with. Hp tuners claims there are tables that can’t be seen with the t87 that the t93 has. I’m planning on swapping them out shortly and reading it.
Let us know what you see.
lt4camaro is offline   Reply With Quote
Old 03-18-2023, 09:02 AM   #17
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by lt4camaro View Post
Let us know what you see.
For sure. Maybe someone a little more knowledgeable like King or someone would have more knowledge looking at it but will gladly let you know if I notice any changes.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 09:17 AM   #18
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Quote:
Originally Posted by JP374 View Post
For sure. Maybe someone a little more knowledgeable like King or someone would have more knowledge looking at it but will gladly let you know if I notice any changes.
Good to hear, would love to know more when you figure it out. I wished I'd had mine overnighted instead of second day air. Tuesday thru Thursday looks like rain here so hopefully I'll get some dry time for some logs to figure things out since I have TNT on Saturday the 25th.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 03-18-2023, 09:30 AM   #19
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by laynlo15 View Post
Good to hear, would love to know more when you figure it out. I wished I'd had mine overnighted instead of second day air. Tuesday thru Thursday looks like rain here so hopefully I'll get some dry time for some logs to figure things out since I have TNT on Saturday the 25th.
Well hopefully there’s some new stuff available but if not at least I’ll have the tcm that originally came with the car.

I’ll update once I read the file etc.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 09:48 AM   #20
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Quote:
Originally Posted by JP374 View Post
Well hopefully there’s some new stuff available but if not at least I’ll have the tcm that originally came with the car.

I’ll update once I read the file etc.
Sounds good. Thx for chiming in on your T93 update.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 03-18-2023, 04:09 PM   #21
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by laynlo15 View Post
Sounds good. Thx for chiming in on your T93 update.
You’re welcome.

Well as far as I can tell there are no differences except that my t87 tune won’t flash to the t93. All the tables look the same, it’s just like the t87 so it won’t let you read the file, it just gives you the stock file after you try to read it.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 07:13 PM   #22
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Explain, so since I didn't have a stock file to read before I'll just have to make changes to what ever it reads which your saying is just the file that GM had hidden that we couldn't change before it was unlocked. Correct?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 03-18-2023, 07:26 PM   #23
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by laynlo15 View Post
Explain, so since I didn't have a stock file to read before I'll just have to make changes to what ever it reads which your saying is just the file that GM had hidden that we couldn't change before it was unlocked. Correct?
Yes. So it reads as a stock file everytime, so if you tune the tcm and read it, it will show up as stock file.

I’m having some problems thou:

I copied everything over from my T87A to the T93 and it will not write. I’ve never had this issue before. It shows that it writes but the car says put in Park and will not do anything, I unhook battery and when I try to start it says put in park again. I’m not sure what’s going on. I was able to write the stock file I read from it thou so idk what’s causing the issue.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 07:44 PM   #24
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,155
Did you plug the T93 in correctly? That plug can be turned 180* and plug in. I had similar problems when I first plugged the T87 in. I didn’t even know I did it. Chuck at HHP told me to reverse the plug and BINGO.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // TooHighPSI Port Injection // FF // Katech Dual In-Tank // Soler 103 // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote
Old 03-18-2023, 07:50 PM   #25
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by radz28 View Post
Did you plug the T93 in correctly? That plug can be turned 180* and plug in. I had similar problems when I first plugged the T87 in. I didn’t even know I did it. Chuck at HHP told me to reverse the plug and BINGO.
Yes I triple checked it. The t93 has a pin so can only go in 1 way. The 87a can go in either way thou.

It allows me to flash the stock file but it’s not allowing the tuned file. Idk
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.
JP374 is offline   Reply With Quote
Old 03-18-2023, 08:12 PM   #26
Joshinator99


 
Joshinator99's Avatar
 
Drives: 2017 Camaro 2SS A8
Join Date: Aug 2018
Location: Petersham MA
Posts: 4,701
Quote:
Originally Posted by JP374 View Post
Yes I triple checked it. The t93 has a pin so can only go in 1 way. The 87a can go in either way thou.

It allows me to flash the stock file but it’s not allowing the tuned file. Idk
So, to be clear, you took the T93 file and made mods to it…but cannot flash it in?

You definitely wouldn’t be able to use the T87A file at all since it’ll have a different OS. But no reason you couldn’t do a “compare file” and copy changes to the T93 file.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
Joshinator99 is offline   Reply With Quote
Old 03-18-2023, 08:15 PM   #27
JP374
 
JP374's Avatar
 
Drives: 21 Lt1
Join Date: Dec 2016
Location: 48047
Posts: 172
Quote:
Originally Posted by Joshinator99 View Post
So, to be clear, you took the T93 file and made mods to it…but cannot flash it in?

You definitely wouldn’t be able to use the T87A file at all since it’ll have a different OS. But no reason you couldn’t do a “compare file” and copy changes to the T93 file.
Yes exactly. I compared and copied everything over. What’s weird is I can flash the stock T93 file but the copied file won’t. I’ve triple checked the file idk what else it could be.
__________________
21 Camaro LT1 Fully forged, Katech ported stock heads, P1X,3.7 upper and ATI w/ 8.25 lower, Stage 2 intercooler, Race B.O.V, Btr stage 2 blower cam, Btr Trinity intake, 103mm TB, F.I.C +30’s, Fore innovations, LPE big bore pump, Weld Lagunas Drag Pack. Circle D TC. Full Bmr upgrades, Keltrac rear shocks.

Last edited by JP374; 03-18-2023 at 08:35 PM.
JP374 is offline   Reply With Quote
Old 03-18-2023, 11:21 PM   #28
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Quote:
Originally Posted by JP374 View Post
Yes exactly. I compared and copied everything over. What’s weird is I can flash the stock T93 file but the copied file won’t. I’ve triple checked the file idk what else it could be.
So you can't modify the T93 TCM you sent in and had unlocked? You can't up the shift pressures? Change the torque levels from stock? Maybe I'm misunderstanding what your saying.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.