12-03-2018, 08:53 PM | #1 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
MBRP Exhaust on an A8
Guys I really love the MBRP Exhaust and I really wanna know if anyone hear has installed this exhaust on the A8’s? If so what have you done to have it work.
__________________
Well............ At least you tried. lol
Last edited by AlphaCamaro7; 12-04-2018 at 03:09 PM. |
12-04-2018, 08:06 AM | #2 |
Drives: 6th gen camaro ss Join Date: Oct 2018
Location: Colorado
Posts: 46
|
What do you mean seemlessly ? It litterally bolts right on to the secondary cats !
|
12-04-2018, 03:08 PM | #3 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
It’s not about bolting on. It’s about the A8 being able to work with the MBRP Exhaust. Because Of the AFM I would need a tune just to put on axelbacks and that’s where I needed input. Because the M8 are a simple cut and bolt on with no tune. And I’m wondering if that could be the same case with the A8 as well.
__________________
Well............ At least you tried. lol
|
12-04-2018, 04:13 PM | #4 |
Drives: Currently Looking for 2019 SS Join Date: Dec 2017
Location: Orange County ,CA
Posts: 223
|
You will need to tune it if you get a CATBACK since I don't think they are compatible with AFM.
AXLEBACK doesn't require a tune since its just a bolt on. |
12-04-2018, 04:57 PM | #5 |
Drives: 6th gen camaro ss Join Date: Oct 2018
Location: Colorado
Posts: 46
|
if you get catback , leave the afm valves plugged in . Youll still go into v4 mode . Axelback you wont need a tune
|
12-04-2018, 09:49 PM | #6 | |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
Quote:
How will I leave afm plugged in if the mbrp doesn’t have an option to use the afm?
__________________
Well............ At least you tried. lol
|
|
12-04-2018, 11:12 PM | #7 |
Drives: 2018 SS, 2016 GT Join Date: Mar 2018
Location: California
Posts: 210
|
Maybe zip tie the valves to the side?
Try taking the AFM motors off, leave them connected, and then zip tie them to the side and see if it throws a code. I've thought about that once but decided to keep them to quiet down highway cruising and swaped out everything else. |
12-10-2018, 09:47 AM | #8 |
Drives: 2018 Camaro ZL1 A10 Join Date: Nov 2018
Location: West Chester, PA
Posts: 462
|
|
12-13-2018, 01:59 PM | #9 |
Drives: 2017 50th Anniversary Join Date: Dec 2015
Location: illinois
Posts: 424
|
I have the axle back on my A8. Just bolts on with no issues and no tune required.
|
|
|
Post Reply
|
|
|