02-21-2019, 02:44 PM | #1 |
Drives: '19 ZL1 1LE Join Date: Feb 2019
Location: Miami
Posts: 128
|
2019 ZL1 1LE - New Owner Impressions
I took delivery of my '19 ZL1 1LE recently. Even though I am in Miami, FL, got the car from Sam Pierce Chevrolet in Daleville, IN (Indianapolis) and couldn't have been happier with their service.
Initially was on the market for a 2014-2015 Z28 in white, was pretty hard to find or the ones I found weren't in good enough of a shape, so I decided to just order a new ZL1 1LE. I bought the car without ever driven a newer Camaro, let alone have even sat in one. I was sold on the fact that people who I would say are "credible" journalists and professional racers who had driven these cars were all saying "Do it!", so I did. I'm a fairly seasoned driver (on track), a very picky person when it comes to cars and not attached to one brand. One of my favorite street cars I've driven on track was a lightly modded C6 ZR1 (had a smaller pulley and on massive Hoosier R6's). The only thing I didn't like about the C6 ZR1 was the steering feel (lack of it). I bought the ZL1 1LE with high expectations, however always had the question of "how will the steering feel?". Glad to report that, the Camaro is above what I expected and I had some high expectations. Most importantly the steering feel is on point! This is the first thing I thought when I went for that first drive when the car arrived. Knit picking, the steering is way too heavy in track mode, but I could live with that, most important thing was that the steering feel is very direct with no on center sloppiness! For a street car, I am very well impressed with the quality, fit finish of the interior, it really does feel like a quality product, but I guess I have to wait and find out if it starts squeaking and rattling over some time. Even though I wasn't planning on taking the Camaro out on track before it was completely PPF'd (clear wrapped), I couldn't resist and took it out on track for a few sessions yesterday. The most notable thing for me was how well the car puts the power down, and oh my, how well that front end feels. My regular track car is a Porsche Cayman GT4 and I really think the GT4 one of the nicest modern cars available, in terms of being a drivers car. The ZL1 1LE holds its own next to the GT4, and the first session around the track, I was 2 seconds quicker than the GT4 on a track where lap times are in the 1 minute 20-30 second mark. The only thing I can say which I really think needs attention on the ZL1 1LE is the brakes, not a big fan of the brake pedal feel. It might be due to the fact that I am used to running race compound pads, but the ZL1 1LE's brake pedal travel is way too much and not as direct as I would want it to be. Especially after a few good laps. They do not fade, but the pedal does loose feel. After getting some more seat time, this is going to be the first area of attack for me, I will be changing the pads to a Race Tehcnologies racing compound pad, after I consult with them, and also have gotten in touch with some credible contacts on seeing if I can get some brake lines made for this car. I know they have rubber lines with a metal reinforcement weave, I really think the brake feel could benefit from better lines. Hence why I am working on getting some better alternatives for it made for me. Either way, overall as you can tell from my little write up, I am extremely happy with the car. I attached some pictures from yesterday at the track. Bonus picture material is my friends Z28 with a Procharger that is putting down close to 700hp to the rear wheels. |
02-21-2019, 02:45 PM | #2 |
CamaroFans.com
|
Hell of a lineup there... Glad you're enjoying it!!!
|
02-21-2019, 02:59 PM | #3 |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,020
|
FYI, you can decouple the steering settings from the modes in the Settings menu on the screen.
Nice line up, BTW. Two of my dream cars are the GT4 and the GT3. I'm really excited about seeing what the next gen GT4 is. If they offer it with PDK and the 9K redline GT3 de-tuned 4.0, that would be the ultimate GT car to have.
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 |
02-21-2019, 03:05 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,696
|
That is an easier fix than the brake pedal feel, just set steering mode to sport or tour, independent of drive mode selection (Vehicle > Driving Mode > Steering). Thanks a lot for the review
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
02-21-2019, 03:24 PM | #5 |
Craig
Drives: 2019 ZL1 1LE Join Date: Jan 2019
Location: Peterborough, ON Canada
Posts: 395
|
Possibly a stupid question, but did you do the whole “bedding the brakes” before taking it to the track and hammering on it? I know it’s claimed not bedding correctly will not yield the correct “bite” on high end brakes
|
02-21-2019, 03:25 PM | #6 | |
Drives: '19 ZL1 1LE Join Date: Feb 2019
Location: Miami
Posts: 128
|
Quote:
Yes of course, I actually bed the brakes in on my first drive of the car. The issue isn't a lack of bite, it is the brake pedal feel, especially after you get some heat into the brakes. PS: If you have never been, you need to take your 1LE out with the 1MoreLap crew at Calabogie Motorsports Park, you have one of the best race tracks in North America in your backyard. |
|
02-21-2019, 03:34 PM | #7 | |
Craig
Drives: 2019 ZL1 1LE Join Date: Jan 2019
Location: Peterborough, ON Canada
Posts: 395
|
Quote:
How much of a pain is the break in processes? I’ve seen doing some 50% and WoT pulls in a higher gear to seat the rings while not exceeding the 4K RPM etc. But I have about a hour highway drive to get the car home and have all these restrictions, don’t use cruise, no constant speed, apply the brakes a bunch at certain speeds and applications etc |
|
02-21-2019, 03:36 PM | #8 | |
Drives: '19 ZL1 1LE Join Date: Feb 2019
Location: Miami
Posts: 128
|
Quote:
Only thing I'll say is, talk to any reputable engine builder, and they'll tell you to run the engine wide open from day one. |
|
02-21-2019, 03:39 PM | #9 |
Craig
Drives: 2019 ZL1 1LE Join Date: Jan 2019
Location: Peterborough, ON Canada
Posts: 395
|
|
02-21-2019, 03:42 PM | #10 |
This is a great review. Thanks for taking the time to post your thoughts and the photos...that's quite the setup! I'm also a big fan of the GT3 and Cayman GT4...though sadly I've never had the opportunity to drive either one.
Keep us posted as you get more seat time in the car. |
|
02-21-2019, 04:28 PM | #11 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
You may need to bleed your brakes, have you done that? Also, I added SS brake lines and this is a must for any track car that doesn't come with them. My ZL1 1LE has SS lines and they were bled properly and filled with Motul RBF.
Stepping on them now is night and day vs. OEM lines before bleeding. |
02-21-2019, 04:52 PM | #12 | |
Drives: '19 ZL1 1LE Join Date: Feb 2019
Location: Miami
Posts: 128
|
Quote:
The car is brand new, would have guessed bleeding isn't necessary on a new car, especially if it is being marketed as a track ready vehicle. I will get upgrading the lines, but not thinking of SS, looking at other options while I am in the act of changing the lines. Also surprised to read some threads here where people have said the stock lines that have some sort of metal braiding inside the rubber is good and no difference is to be had with SS lines. |
|
02-21-2019, 04:57 PM | #13 |
|
Great review and congratulations!!
__________________
|
02-21-2019, 05:13 PM | #14 |
Drives: 2019 ZL1 Crush Join Date: Jan 2019
Location: Colorado Springs
Posts: 564
|
Generally speaking, braided lines will do nothing but add a bit of show. The stretch and bursting strength of stock lines far exceeds what is generated with pedal pressure. Now if they are old and squishy, different story.
|
|
|
Post Reply
|
|
|