C7 Carbon | Time Attack Wide Body Kit updates!! - Page 2

Joshinator99 · 02-09-2021, 08:16 PM

Quote:

Originally Posted by Joey Soul

I would definitely not spend $2500 on fenders. Price is a factor

Agreed, but I suspect they would like to get the design and process down pat before quoting a price. Looks promising so far though.

FarmerFran · 02-09-2021, 08:29 PM

$2500 per seems low to me. But I am not a fender guy, I am more Ibanez

But seriously, I would guess closer to 20K - total

Aragorn · 02-09-2021, 08:50 PM

Looks good—and those wheels, dayum!

Hops · 02-09-2021, 10:27 PM

I like it! But not good enough of a driver to even begin to extract all the performance available in stock!

RobertAvitia · 02-09-2021, 11:01 PM

Let’s see if it even happens. They teased these fenders years ago

gpskinzhut · 02-10-2021, 08:37 AM

Looks a lot better than some of the initial designs that y'all posted with the louvered venting. I know it was mentioned back then that you were starting the project with the '19+ bumper, are there still plans for '16-'18 cars or is this interchangeable?

C7 Carbon · 02-10-2021, 08:14 PM

Hey everyone, here is quick update from our design team showing that the width on this kit will be approx. 1/2" wider than the ZL1 oem spec width.

More updates coming soon, stay tuned!

C7 Carbon · 02-18-2021, 08:05 PM

And sorry for the late response about the pricing. We don't have a firm price set yet. We are going to wait for the first few kits to hit our production floor before we release final pricing. But we are anticipating the following:

Front fenders made from epoxy in FRP with carbon fiber inserts $2,500
Front Splitter in Carbon Fiber - $699
Front Bumper Extensions Carbon Fiber - $599
Apx 3798 + s/h.

We are also planning to make a front splitter that will be compatible with the 6th gen camaro before the refresh.

Thank you again!!

BlackbeastSS2 · 02-18-2021, 08:20 PM

Quote:

Originally Posted by C7 Carbon

And sorry for the late response about the pricing. We don't have a firm price set yet. We are going to wait for the first few kits to hit our production floor before we release final pricing. But we are anticipating the following:

Front fenders made from epoxy in FRP with carbon fiber inserts $2,500
Front Splitter in Carbon Fiber - $699
Front Bumper Extensions Carbon Fiber - $599
Apx 3798 + s/h.

We are also planning to make a front splitter that will be compatible with the 6th gen camaro before the refresh.

Thank you again!!

Dam, sorry folks my guess was off by 1 cent. I said $2,499.99 on first page for fenders. Winner Winner chicken dinner. You would think I had inside information.

USAFS197 · 02-20-2021, 06:00 AM

That's really not too bad if I'm being honest. I'm not entirely sure the shape of the side fender vent completely matches the lines of the 6th Gen Camaro but, as others have mentioned, this is a huge improvement over their previous iteration. I think it's a step in the right direction. However, I will say that this may mess with the overall dimensions of the vehicle. Is the front now just as wide as the rear with this front end swap?

Martinjlm · 02-20-2021, 07:05 AM

Quote:

Originally Posted by FarmerFran

$2500 per seems low to me. But I am not a fender guy, I am more Ibanez

But seriously, I would guess closer to 20K - total

As a bass player, I get this.

it’s all about the Music, Man.

Pupilbone · 02-20-2021, 07:07 AM

Front splitter = Nope!

02-09-2021, 11:01 PM	#19
RobertAvitia BYND GARAGE Drives: 17' 1LT Turbo Join Date: Feb 2016 Location: CA Posts: 667	Let’s see if it even happens. They teased these fenders years ago __________________ https://m.youtube.com/#/c/BEYONDGARAGE http://instagram.com/bynd_ltg

02-10-2021, 08:37 AM	#20
gpskinzhut Drives: 2017 ZL1 A10 Join Date: Aug 2011 Location: Knoxville, TN Posts: 1,955 View My Garage	Looks a lot better than some of the initial designs that y'all posted with the louvered venting. I know it was mentioned back then that you were starting the project with the '19+ bumper, are there still plans for '16-'18 cars or is this interchangeable? __________________ 2017 ZL1 A10 2017 2SS M6: (SOLD) \|\| 2014 2LT Convertible: (SOLD) \|\| 2010 2LT M6 Supercharged:(SOLD) \|\| 1987 IROC-Z 5.0 M5: (SOLD)

02-20-2021, 06:00 AM	#24
USAFS197 Drives: 2018 Audi TT RS Join Date: Jan 2014 Location: Navarre, Florida Posts: 1,915	That's really not too bad if I'm being honest. I'm not entirely sure the shape of the side fender vent completely matches the lines of the 6th Gen Camaro but, as others have mentioned, this is a huge improvement over their previous iteration. I think it's a step in the right direction. However, I will say that this may mess with the overall dimensions of the vehicle. Is the front now just as wide as the rear with this front end swap? __________________ 2018 Audi TT ▊RS 2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold

02-20-2021, 07:07 AM	#26
Pupilbone Drives: 2019 Crush ZL1 M6 Join Date: Jul 2018 Location: Grimsby, Ontario Posts: 708 View My Garage	Front splitter = Nope! __________________ #SaveTheManuals

02-09-2021, 08:29 PM	#16
FarmerFran Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020 Location: Earth Posts: 4,031	$2500 per seems low to me. But I am not a fender guy, I am more Ibanez But seriously, I would guess closer to 20K - total

02-09-2021, 08:50 PM	#17
Aragorn Account Suspended Drives: Camaro SS 1LE Join Date: Aug 2018 Location: Phoenix Posts: 1,538	Looks good—and those wheels, dayum!

02-09-2021, 10:27 PM	#18
Hops Drives: 2019 1ss 1le, blue wrap Join Date: Aug 2017 Location: Maryland Posts: 633	I like it! But not good enough of a driver to even begin to extract all the performance available in stock!

02-10-2021, 08:14 PM	#21
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Hey everyone, here is quick update from our design team showing that the width on this kit will be approx. 1/2" wider than the ZL1 oem spec width. More updates coming soon, stay tuned!

02-18-2021, 08:05 PM	#22
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	And sorry for the late response about the pricing. We don't have a firm price set yet. We are going to wait for the first few kits to hit our production floor before we release final pricing. But we are anticipating the following: Front fenders made from epoxy in FRP with carbon fiber inserts $2,500 Front Splitter in Carbon Fiber - $699 Front Bumper Extensions Carbon Fiber - $599 Apx 3798 + s/h. We are also planning to make a front splitter that will be compatible with the 6th gen camaro before the refresh. Thank you again!!

User Name		Remember Me?
Password