05-12-2019, 05:53 PM | #1 |
Rear suspension control arm cover??
So my new 2019 2SS had some plastic parts in a bag, in the trunk.
I read the instructions for the front brake cooling and decided I would not need those parts as I will not race the car. Then there were two plastic covers for the rear control arms. Why didn't GM put them on during assembly? I finally found the plastic push pins in the storage area under trunk floor, of course the package had been opened and there were only seven, 8 required. Any comments on these covers is appreciated. |
|
05-12-2019, 09:57 PM | #2 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,623
|
These should've been installed by the dealer as part of the pre-delivery inspection process. I'd take the car back and make them do it with me watching.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
05-12-2019, 10:15 PM | #3 |
Thanks.
That's OK, I've already got them on. That is why I don't go back to dealers, you can't trust them to do anything. |
|
05-16-2019, 07:41 AM | #4 |
Drives: 2015commemorative vert 2SS Join Date: Oct 2013
Location: northern Indiana
Posts: 948
|
I have these too, but after trial fitting these, the linkage rods attached to the control arm for the sway sensors are in the way. Did you cut the covers to clear these?
__________________
2018 ZL1 Bright Yellow, A10, PDR, sunroof, carbon hood, and dash- sold
2020 2SS A10 sunroof..shock and steel special-traded 2015 commemorative vert 2ss |
05-16-2019, 09:15 AM | #5 |
No cutting. Mine didn't interfere with anything, all holes lined up nicely and fit seemed good.
|
|
05-16-2019, 10:40 AM | #6 |
Drives: 2019 2SS Join Date: Mar 2019
Location: WA
Posts: 67
|
My dealer denied it was on the PDI document. I installed them myself without any clearance problems.
|
01-15-2023, 11:37 AM | #7 |
Drives: 2023 Camaro 2SS Join Date: May 2021
Location: Draper, Utah
Posts: 4
|
Thanks for this thread! I just got home with my 2023 2SS yesterday and found a bag in the back with the floor mats, owner's manual, fuel funnel, tow loop, front wind deflectors, and rear control arm covers in it.
I actually noticed from the pictures on the dealer's website that the front deflectors weren't installed. Before I took the car, I asked the sales manager why they weren't there, and he said, "I guess they didn't come from the factory." Uh...thanks. Easy to install...I'll do it myself, since the dealership is 50 miles away. (I had to buy the car there...they were the only ones with the options I wanted.) Of course, the track parts and front license plate mount were in the truck, too...but that's where they're supposed to be. |
|
|
Post Reply
|
|
|