Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Dragstrip and Launching Discussion


Phastek Performance


Post Reply
 
Thread Tools
Old 01-29-2024, 12:38 PM   #1
FastEd
 
Drives: Camaro SS
Join Date: Jan 2024
Location: ON,Canada
Posts: 5
Wheel Hop M6

Hi everyone,

Looking for some insight I have 6th gen SS M6. Experience real bad wheel hop on prepped surface. Currently riding on Yokas AD09s, more of track tire rather than drag . From there upgraded to BMR cradle bushing lock out kit and lower trailing arms. Still same wheel hop. Have to baby the throttle or I hop violently. Any suggestions? Continue with suspension upgrades?
FastEd is offline   Reply With Quote
Old 01-29-2024, 02:14 PM   #2
s346k


 
s346k's Avatar
 
Drives: like an old lady
Join Date: Jun 2012
Location: indiana
Posts: 2,396
put a drag tire on it if you want performance at a drag strip
__________________
2016+ camaro: everyone’s first car
s346k is offline   Reply With Quote
Old 01-29-2024, 05:33 PM   #3
cjperformance

 
cjperformance's Avatar
 
Drives: 2017 Camaro SS 50th Anniversary
Join Date: Apr 2021
Location: Missouri
Posts: 929
Do you have stock tire sizes?
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel
TooHighPsi Port Injection (installed & tuning)
CircleD 3K Stall | QA1 CF Driveshaft
Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear
Forgestar F14 18x8 NT555G2 235/50/18 Front
10.84@131 w/4.13" pulley
??.??@??? w/3.7" pulley (installed & tuning)
cjperformance is offline   Reply With Quote
Old 01-29-2024, 06:54 PM   #4
FastEd
 
Drives: Camaro SS
Join Date: Jan 2024
Location: ON,Canada
Posts: 5
Quote:
Originally Posted by cjperformance View Post
Do you have stock tire sizes?
I just upped the rear for staggered look 285/35R20
FastEd is offline   Reply With Quote
Old 01-30-2024, 07:22 AM   #5
cjperformance

 
cjperformance's Avatar
 
Drives: 2017 Camaro SS 50th Anniversary
Join Date: Apr 2021
Location: Missouri
Posts: 929
Assuming the stock tire for yours was the 275/35/20 then that shouldnt be a problem. I had what i first thought was wheel hop, but it was very likely some computer shenanigans due to having non-compatible tire size combo. But a 285/35 is only about .2" larger.

Just curious what power level you are at?
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel
TooHighPsi Port Injection (installed & tuning)
CircleD 3K Stall | QA1 CF Driveshaft
Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear
Forgestar F14 18x8 NT555G2 235/50/18 Front
10.84@131 w/4.13" pulley
??.??@??? w/3.7" pulley (installed & tuning)
cjperformance is offline   Reply With Quote
Old 01-30-2024, 08:03 AM   #6
DevilsReject97
Nightmare
 
DevilsReject97's Avatar
 
Drives: Your mom crazy in bed
Join Date: Mar 2011
Location: Naptown
Posts: 2,438
1.) Consider getting a true drag radial, as it would actually be more beneficial to your launch as opposed to the street tire. If nothing else, consider looking at an R888R or something similar as that's still better than your typical street tire.

2.) If you're drag racing on street tires - drive around the water box and do a quick spin of the tires to clear debris. Don't waste time with a burnout because it isn't beneficial and you'll just help spread water everywhere, most likely pissing some folks off.

3.) Lower the tire pressure on the street tires to about 30lbs, and drop about 2 lbs every time until you find that "happy" place. Every car will have a different one due to the type of tire/power/etc...

I'm sure there's something I've missed...
__________________
DevilsReject97 is offline   Reply With Quote
Old 01-30-2024, 06:15 PM   #7
FastEd
 
Drives: Camaro SS
Join Date: Jan 2024
Location: ON,Canada
Posts: 5
Quote:
Originally Posted by cjperformance View Post
Assuming the stock tire for yours was the 275/35/20 then that shouldnt be a problem. I had what i first thought was wheel hop, but it was very likely some computer shenanigans due to having non-compatible tire size combo. But a 285/35 is only about .2" larger.

Just curious what power level you are at?

Yes it was. I looked it up before upped a size, I am well within 3% balance. I am at 462WHP/488WTQ.
FastEd is offline   Reply With Quote
Old 01-30-2024, 06:21 PM   #8
FastEd
 
Drives: Camaro SS
Join Date: Jan 2024
Location: ON,Canada
Posts: 5
Quote:
Originally Posted by DevilsReject97 View Post
1.) Consider getting a true drag radial, as it would actually be more beneficial to your launch as opposed to the street tire. If nothing else, consider looking at an R888R or something similar as that's still better than your typical street tire.

2.) If you're drag racing on street tires - drive around the water box and do a quick spin of the tires to clear debris. Don't waste time with a burnout because it isn't beneficial and you'll just help spread water everywhere, most likely pissing some folks off.

3.) Lower the tire pressure on the street tires to about 30lbs, and drop about 2 lbs every time until you find that "happy" place. Every car will have a different one due to the type of tire/power/etc...

I'm sure there's something I've missed...



That's what I do. I drive around the water box. I do have decent track tires Yokas AD 09s. Just not drags, next set will be Nittos 555R2. I tried to lower pressure once, I drive car to the track. Didn't help and I was far from home as we have only few tracks in a whole province so no air compressor to pump it back up.
FastEd is offline   Reply With Quote
Old 01-30-2024, 06:54 PM   #9
DevilsReject97
Nightmare
 
DevilsReject97's Avatar
 
Drives: Your mom crazy in bed
Join Date: Mar 2011
Location: Naptown
Posts: 2,438
Quote:
Originally Posted by FastEd View Post
That's what I do. I drive around the water box. I do have decent track tires Yokas AD 09s. Just not drags, next set will be Nittos 555R2. I tried to lower pressure once, I drive car to the track. Didn't help and I was far from home as we have only few tracks in a whole province so no air compressor to pump it back up.
Invest in one of these puppies, or find a similar one...they pretty much come standard in the Camaro ZL1... would allow you to inflate/deflate the tires as needed.

The 555r2 is a solid choice as well for track duty..

https://www.ebay.com/itm/12627848943...MaAnD4EALw_wcB
__________________
DevilsReject97 is offline   Reply With Quote
Old 02-08-2024, 12:51 PM   #10
asthmamax11
 
asthmamax11's Avatar
 
Drives: 1SS Summit White 6 speed
Join Date: Jul 2017
Location: Gainesville GA
Posts: 579
You really need sticky tires for a modded 6 speed
I'd even say get a real drag pack at least for the rear.
18" with rrrII's or mickey thompsons
__________________
16 1SS M6 White
Magnuson 2.3 Heartbeat
Roto Fab
Solo Performance Cat deletes and Axleback
Hurst short shifter
#'s coming soon

Riaction coilovers
1LE sway bars
BMR mm
BMR chassis brace

Flow one 19" wheels wrapped in Mickey Thompsons


02 Z28 M6 35th anniversary
80k miles
T-tops
Leather
Bolt ons
Joy to drive this classic every day!
Daily Driver
asthmamax11 is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:21 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.