05-18-2020, 12:37 PM | #1 |
Drives: 2019 Chevrolet Camaro 2SS Join Date: Apr 2020
Location: VA
Posts: 9
|
2019 2SS Park Assist - not working like it should
I have a 2019 Camaro 2ss and every time I put my car in Reverse it says park assist off. When I go to the Collision detection system menu everything is turned on including park assist but when I'm in reverse and backing up into the driveway there are no beeps or indications on the rearview camera that there's any kind of detection. I've only had this car a few weeks and I've read the owner's manual. I've looked at my Chevrolet app for support and I don't see any specific references to the Camaro park assist only the generic Chevrolet park assist. If I am doing anything wrong please tell me, I would really appreciate it! I'm really unsure of what is going on.
|
05-19-2020, 08:59 AM | #2 |
Drives: 2019 Chevrolet Camaro 2SS Join Date: Apr 2020
Location: VA
Posts: 9
|
Does anyone have any suggestions?
Sent from my SM-G960U using Tapatalk |
05-19-2020, 12:26 PM | #3 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,711
|
If it is a new car then maybe one of the sensors isn't working and that disables park assist? You may need to take it to the dealer to run diagnostics.
|
05-19-2020, 02:35 PM | #4 | |
Drives: 2019 Chevrolet Camaro 2SS Join Date: Apr 2020
Location: VA
Posts: 9
|
Quote:
Sent from my SM-G960U using Tapatalk |
|
05-22-2020, 01:09 PM | #5 |
Drives: 2019 Chevrolet Camaro 2SS Join Date: Apr 2020
Location: VA
Posts: 9
|
Just in case anyone was interested, took it to the dealership yesterday and found the issue and fixed it. A hidden low voltage code was blocking the park assist function. Once they cleared the code it started working fine. Never had a check engine light so I never knew. Reason it probably happened was that this car was sitting in the showroom and never test driven, so the battery was probably drained before I bought it.
|
05-22-2020, 05:09 PM | #6 | |
Drives: Camaro ZL1 Join Date: May 2020
Location: Tampa
Posts: 166
|
Quote:
|
|
05-25-2020, 04:23 PM | #7 |
Drives: 2019 ZL-1 Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
|
If you can put a Battery minder 1510 on it- Its a Battery tender with a desulfarator mode....really works. These AGM batterys need that. Mine is 3 years old and my battery % went from 70% to 90 % in 10 days......
These cars have variable charging systems and sometimes when you are driving it wont charge and you put the car away at 12.3 v.....The tender keeps voltage up....
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...
2012 Yukon XL Denali w/ 6.2 AWD |
03-05-2022, 11:30 PM | #8 | |
Drives: 2021 Riverside blue 2SS 1LE Join Date: Mar 2019
Location: Brooklyn NY
Posts: 69
|
Quote:
|
|
01-21-2023, 08:49 AM | #9 |
Drives: 2019 2SS 1LE Join Date: Sep 2011
Location: New Lisbon, Wisconsin
Posts: 62
|
I'm having the exact same issue on my 2019 2SS. Will have to check and clear any codes and see if that does the trick...
__________________
Wooo Hooo... 2019 2SS 1LE!!!
|
08-11-2023, 05:29 PM | #10 |
Drives: 19 Cam 2SS Manual Join Date: Sep 2019
Location: INDY
Posts: 2
|
What did this end up being. My cars sits in garage most of the time and battery is new. I show no codes with my scanner. Do I have to use like dbr scanner?
|
|
|
Post Reply
|
Tags |
2ss, parking sensor |
|
|