Micky Thompson et street R bias ply

Buckscamaro · 01-04-2019, 01:34 PM

Hello,

Has anyone ran a 28x11.5-17 on 17x9.5 race stars?

I’m currently running 28x10.5 Hoosiers. Great tire, but I am tired of having to swap tires out. These new mt bias plys are dot !

Any input would be greatly appreciated, thanks.

JonDaddy82 · 01-23-2019, 01:12 PM

Interested as well.

MP3BOOSTED · 01-23-2019, 01:29 PM

don't think that would fit, i'm running the et street rs on my 17x10.5 racestars just fine. not the bias ply though. i heard bias ply won't last/ at least if you plan to highway drive them.

Jhunsberger · 02-01-2019, 09:25 AM

Here is my setup, I have not been to the track yet, but i have made a few pulls on the street. I did notice either my street tire setup or this track setup rubbed in the drivers side rear inner fender liner, which I did move the harness that runs up thru there. other than that it seems to fit, its tight though. I am running a 10.5 wide wheel versus your 9.5 wide wheel.

Front
Wheels: Race Star 92's 17x4.50 5x120BC 1.75"BS GLOSS BLACK
Tires: M/T ET FRONT 27.5/4.0-17

Rear
Wheels: Race Star 92's 17x10.5 5x120BC 7" BS GLOSS BLACK
Tires: M/T ET STREET R BIAS 28x11.5-17

JonD · 02-03-2019, 02:43 PM

Here’s my set-up... LOVE driving this on the street

*DragStar 17x9.5 #92-795252G
*Mickey Thompson ET Street R’s P275/40-17

*DragStar - 18x5 #92-850245G
*M&H - 185/50R18

Beef SS2 · 03-07-2020, 01:24 PM

I will post as soon as I receive my VMS 17x10 wheels. I am going to mount MT 28x11.5 on them as far as I know hopefully harness relocation should help. Any input appreciated.

Beef SS2 · 03-19-2020, 12:06 PM

28x11.5 17 on VMS 17x10
Car is lowered on GM lowering springs and Bremen brakes
It’s a close fit but no rubbing so far on street driving.

Omega Doom · 04-04-2020, 03:33 PM

Quote:

Originally Posted by Beef SS2

28x11.5 17 on VMS 17x10
Car is lowered on GM lowering springs and Bremen brakes
It’s a close fit but no rubbing so far on street driving.

hey sir love the new wheels and just received my 17x10s with 18x5 fronts now just waiting for my tires to show up going for the bolt on M6 record lol anyway which lug nuts did you use if you dont mind me asking?

6spdhyperblue · 04-04-2020, 07:31 PM

Quote:

Originally Posted by Beef SS2

28x11.5 17 on VMS 17x10
Car is lowered on GM lowering springs and Bremen brakes
It’s a close fit but no rubbing so far on street driving.

How do they feel with the radials in the front?

Beef SS2 · 04-08-2020, 11:54 AM

Quote:

Originally Posted by 6spdhyperblue

How do they feel with the radials in the front?

Takes a little getting used to the soft tire walls in the rear but that’s all.

Beef SS2 · 04-08-2020, 11:56 AM

Quote:

Originally Posted by Omega Doom

hey sir love the new wheels and just received my 17x10s with 18x5 fronts now just waiting for my tires to show up going for the bolt on M6 record lol anyway which lug nuts did you use if you dont mind me asking?

Call Bruce’s speed shop at 973 664 0192. He had them there. Kind of steep@ $75 but I knew they were the proper ones.

Nubsnapper · 04-24-2020, 03:10 PM

Quote:

Originally Posted by Beef SS2

28x11.5 17 on VMS 17x10
Car is lowered on GM lowering springs and Bremen brakes
It’s a close fit but no rubbing so far on street driving.

Did you relocate the harness?

Beef SS2 · 05-12-2020, 08:47 PM

Quote:

Originally Posted by Nubsnapper

Did you relocate the harness?

No I didn’t

01-04-2019, 01:34 PM	#1
Buckscamaro Drives: 2016 ss camaro Join Date: Jan 2018 Location: Bellflower ca Posts: 199	Micky Thompson et street R bias ply Hello, Has anyone ran a 28x11.5-17 on 17x9.5 race stars? I’m currently running 28x10.5 Hoosiers. Great tire, but I am tired of having to swap tires out. These new mt bias plys are dot ! Any input would be greatly appreciated, thanks. __________________ You tube channel: G's footage https://youtu.be/VCnanR8qsNg Instagram: boogieman_racing

01-23-2019, 01:12 PM	#2
JonDaddy82 Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017 Location: Nolensville, TN Posts: 618	Interested as well. __________________ 1989 Forumla 350 WS6 <- High School 2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily

01-23-2019, 01:29 PM	#3
MP3BOOSTED Drives: 2017 Camaro SS 1LE (F1A-94 FBO H/C) Join Date: Jun 2017 Location: San Antonio Texas Posts: 843	don't think that would fit, i'm running the et street rs on my 17x10.5 racestars just fine. not the bias ply though. i heard bias ply won't last/ at least if you plan to highway drive them. __________________ Performance Mods: F1A-94, DSX Flex Fuel Kit, MSD Spark Plug Wires, KOOK 2" off road headers, MBRP Race catback exhaust, Pray Performance Custom Boost Cam, Rocker Arm Trunion Upgrade Kit, 7.850" Hardened Chromemoly Length Pushrods and Johnson Racing 2110R Lifters, TSP CNC'd Heads, Ported MSD intake manifold, 103mm Katech Throttle body, Forged Pistons/Rods, RPM Meth kit, DSX Aux Fuel system, AEM Failsafe and banks gauge, LT4 HPFP, LT4 injectors, BMR motor mounts, Hurst Short Throw, Manley SS exhaust valves Videos of my car? Check here: https://www.youtube.com/channel/UCNi...Qy1OL4NVGlPogw

02-01-2019, 09:25 AM	#4
Jhunsberger Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016 Location: 19518 Posts: 402	Here is my setup, I have not been to the track yet, but i have made a few pulls on the street. I did notice either my street tire setup or this track setup rubbed in the drivers side rear inner fender liner, which I did move the harness that runs up thru there. other than that it seems to fit, its tight though. I am running a 10.5 wide wheel versus your 9.5 wide wheel. Front Wheels: Race Star 92's 17x4.50 5x120BC 1.75"BS GLOSS BLACK Tires: M/T ET FRONT 27.5/4.0-17 Rear Wheels: Race Star 92's 17x10.5 5x120BC 7" BS GLOSS BLACK Tires: M/T ET STREET R BIAS 28x11.5-17 __________________ 2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11 Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92

02-03-2019, 02:43 PM	#5
JonD Drives: 2018 SS 1LE Join Date: May 2018 Location: Arizona Posts: 292	Here’s my set-up... LOVE driving this on the street DragStar 17x9.5 #92-795252G Mickey Thompson ET Street R’s P275/40-17 DragStar - 18x5 #92-850245G M&H - 185/50R18 Attached Images __________________ 🌽 Sauced, 2018 SS 1LE - 123mph @ 5,000 DA ARH 2”x3” FULL System, Pray Ported MSD Intake Manifold, Pray Ported GM 95mm TB, RotoFab CAI, DsX e85 Kit, MightyMouse Catch Can, NicD Tune https://instagram.com/corn_sauced?ut...d=o0ako89uurwl

03-07-2020, 01:24 PM	#6
Beef SS2 Drives: chevy Camaro Join Date: Aug 2019 Location: Rockoway Posts: 20	I will post as soon as I receive my VMS 17x10 wheels. I am going to mount MT 28x11.5 on them as far as I know hopefully harness relocation should help. Any input appreciated.

03-19-2020, 12:06 PM	#7
Beef SS2 Drives: chevy Camaro Join Date: Aug 2019 Location: Rockoway Posts: 20	28x11.5 17 on VMS 17x10 Car is lowered on GM lowering springs and Bremen brakes It’s a close fit but no rubbing so far on street driving. Attached Images

User Name		Remember Me?
Password