Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


JUICEDMOTORSPORTS


Post Reply
 
Thread Tools
Old 07-02-2019, 12:43 PM   #1
toohighpsi

 
Drives: 2015 C7 Z06 M7
Join Date: Dec 2012
Location: So-Cal
Posts: 497
Magnuson TVS2650 Magnum DI install - 2018 Camaro SS

And so it begins, helping my son swap the non intercooled TVS2300 on his 2018 Camaro SS for a Magnum DI TVS2650...

Name:  Photo Jul 01, 10 48 25 AM.jpg
Views: 522
Size:  192.8 KB

Name:  Photo Jul 01, 4 26 20 PM.jpg
Views: 518
Size:  185.6 KB

Name:  Photo Jul 01, 4 25 48 PM.jpg
Views: 519
Size:  214.9 KB


With a bit of luck it will be running again by the holiday!
toohighpsi is offline   Reply With Quote
Old 07-02-2019, 02:15 PM   #2
asthmamax11
 
asthmamax11's Avatar
 
Drives: 1SS Summit White 6 speed
Join Date: Jul 2017
Location: Atlanta
Posts: 158
Awesome. Kid is learning alot doing this stuff
__________________
16 1SS M6 White
Magnuson
Roto Fab
Solo Performance axle back
Basic suspension upgrades
Hurst pistol grip short shifter
Throttle controller
551/541


03 Jeep Wrangler
Daily Driver
asthmamax11 is offline   Reply With Quote
Old 07-02-2019, 02:18 PM   #3
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 4,910
Mine will be right behind it as we intend to install it Saturday. Good that Mike is doing his first and will pass along any details along to me for my install. This is the first SS and mine the second although several vets and at least 1 Zl1 are getting finished up. Awesomeness is on its way for all of us.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.65@143 (best MPH 145) w/1.47 60ft 6.25@114 1/8 Employee/Driver
laynlo15 is offline   Reply With Quote
Old 07-02-2019, 02:20 PM   #4
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 4,910
Mike Jr is one smart guy, I think he's working on his engineering degree.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.65@143 (best MPH 145) w/1.47 60ft 6.25@114 1/8 Employee/Driver
laynlo15 is offline   Reply With Quote
Old 07-02-2019, 06:08 PM   #5
Joshinator99
 
Joshinator99's Avatar
 
Drives: 2017 Camaro 2SS A8
Join Date: Aug 2018
Location: Petersham MA
Posts: 465
Quote:
Originally Posted by laynlo15 View Post
Mine will be right behind it as we intend to install it Saturday. Good that Mike is doing his first and will pass along any details along to me for my install. This is the first SS and mine the second although several vets and at least 1 Zl1 are getting finished up. Awesomeness is on its way for all of us.
Best of luck to both of you with your new 2650 installs!
__________________
2017 Chevy Camaro 2SS A8 Whipple, Rotofab Big Gulp, LT5 95mm TB, LT4 fueling, AWE Touring CB with PLPs, Katech 160 TS, DSX E85 Kit, 608 RWHP/610 RWTQ (Mustang Dyno)
2019 Toyota Sequoia Limited 4WD (daily driver)
2018 Alfa Romeo Giulia Ti Sport Q4 (hers)
Joshinator99 is offline   Reply With Quote
Old 07-02-2019, 08:17 PM   #6
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 4,910
Fingers are crossed twice. Should be good to go.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.65@143 (best MPH 145) w/1.47 60ft 6.25@114 1/8 Employee/Driver
laynlo15 is offline   Reply With Quote
Old 07-02-2019, 11:42 PM   #7
flaudia402
 
Drives: 2018 SS 1LE
Join Date: Aug 2018
Location: LA
Posts: 44
Do you have to change the hood to accommodate this blower?
flaudia402 is offline   Reply With Quote
Old 07-02-2019, 11:51 PM   #8
USAFS197

 
USAFS197's Avatar
 
Drives: 2018 Camaro SS 1LE
Join Date: Jan 2014
Location: Navarre, Florida
Posts: 1,560
Following. Interested to see how this turns out.
__________________
2018 Camaro SS 1LE -- FBO
USAFS197 is offline   Reply With Quote
Old 07-03-2019, 06:38 AM   #9
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 4,910
Clears the C7 Z06, Gen6 SS and Zl1 without any cutting or replacing the hood. You do have to replace the valve covers or modify the current covers. We had to widen the intercoolers to lower the stance for hood clearance.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.65@143 (best MPH 145) w/1.47 60ft 6.25@114 1/8 Employee/Driver
laynlo15 is offline   Reply With Quote
Old 07-03-2019, 10:27 AM   #10
toohighpsi

 
Drives: 2015 C7 Z06 M7
Join Date: Dec 2012
Location: So-Cal
Posts: 497
Name:  Camaro 2650-01.jpg
Views: 406
Size:  139.9 KB

Where we ended up yesterday - bolted down and almost ready to run, just need to finish the intercooler water system today.
toohighpsi is offline   Reply With Quote
Old 07-03-2019, 10:46 AM   #11
toohighpsi

 
Drives: 2015 C7 Z06 M7
Join Date: Dec 2012
Location: So-Cal
Posts: 497
Quote:
Originally Posted by asthmamax11 View Post
Awesome. Kid is learning alot doing this stuff
He's a fanatic, his other car is a 73 Maverick passed to him from my dad 5 years ago. Did a total overhaul and just got it running this year.

Name:  Mav1.jpg
Views: 396
Size:  98.9 KB

Name:  Mav2.jpg
Views: 398
Size:  138.2 KB

Dart 302 block, 363ci stroker, TFS heads, AEM Infinity, TVS2300, 500RWHP @4.4 psi

Always looking to keep the younger generations interested. Did a lot for me to keep a wrench in my hand when I was young, can't say it kept me out of trouble, but it defiantly kept me out of the bigger trouble that I could have gotten into...
toohighpsi is offline   Reply With Quote
Old 07-16-2019, 06:20 PM   #12
toohighpsi

 
Drives: 2015 C7 Z06 M7
Join Date: Dec 2012
Location: So-Cal
Posts: 497
Tuning underway on my son's completely stock 2018 Camaro SS LT1 with Magnum DI TVS2650. Only mod on this car is the Magnum DI TVS2650 blower - running CA's (Chevron) 91 octane. Otherwise the car is stock right down to the factory paper air filter.

This is the best power pull so far, I doubt that there is any more this in stock setup, but it is a nice improvement over the TVS2300 (550 RWHP). Might try a bottle of Octane Booster to see what that will yield.

Have some work to finish in the mid-rpm range, but looking forward to some track testing!

Name:  Power Jr Camaro 2650.png
Views: 296
Size:  52.9 KB

Name:  Camaro 2650-02.jpg
Views: 298
Size:  132.8 KB
toohighpsi is offline   Reply With Quote
Old 07-16-2019, 06:45 PM   #13
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 2,376
I just don't care for the torque that it gives up for a street car. Sure at WOT above 5k rpm it definitely makes more steam, but when you are part throttle torqueing the engine through the gears I don't see an advantage here. Midrange is very important imo for a street car. If only this unit was keeping the torque up around 570 avg while still pulling 600whp.

Another thing to note is power loss from shift extension. All gears except 3-4 on a A8 drop back to around 5k rpm with a 64-6500rpm shit. So you would be dropping down to 510whp/528wtq on the gear changes. M6 cars would be even lower. I would think a 2300 making 540/550 would be just as fast. In for track times.
__________________
[2016 NFG 1SS A8][Leather/NPP]
[Whipple/LT5 TB/Rotofab/Flex Fuel/CA ORP/Axle back]
KingLT1 is online now   Reply With Quote
Old 07-16-2019, 10:16 PM   #14
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 4,910
That blower has at least a 105mm pulley and spinning the blower at a pretty low speed. I personally want less torque on the street and more torque at the track. Hard to not spin the tires if you had equal tq/hp. I will be on the dyno in the next week so we can see what mine makes but I'm thinking it will be respectable compared to most blowers out there. I ran 9.83@141 on a 68 degree day and DA of about 500 with my 2300 and I ran 9.77@142 on a 92 degree day and over 3000 DA on less boost, less timing, less meth, slick track so I don't think the 2300 will be comparable to the 2650 at the track with the same combination like mine. We had to pull timing out down low because of track conditions being over 130 degrees. So right now I'm the only one that just took off the 2300 and put on the 2650 and went to the track. Dyno's mean nothing compared to track times. I've been out run by many on the dyno but I've put up much better numbers at the track. Dyno's are for tuning and are a valuable asset but there is nothing like seeing that time slip to prove every dyno wrong. Mike was simply showing the numbers the Camaro made up to where the fuel system said, nope that's it, no shady numbers, no BS. So all the critics will eventually see what we have to offer with the new 2650 so be prepared to get rolled.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.65@143 (best MPH 145) w/1.47 60ft 6.25@114 1/8 Employee/Driver

Last edited by laynlo15; 07-16-2019 at 10:43 PM.
laynlo15 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:42 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.