Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 01-04-2020, 04:11 PM   #1
TheDamme94
 
Drives: 2016 D1X Procharged Black 1SS
Join Date: Jun 2018
Location: Alabama
Posts: 93
3 bar MAP sensor location

Planning on changing my MAP sensor for the first time from the stock LT1 to GM 12592525 3 bar. Anyone have a picture of the sensor on the intake manifold? And any tips i should know when swapping it?
TheDamme94 is offline   Reply With Quote
Old 01-06-2020, 12:04 PM   #2
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,072
Quote:
Originally Posted by TheDamme94 View Post
Planning on changing my MAP sensor for the first time from the stock LT1 to GM 12592525 3 bar. Anyone have a picture of the sensor on the intake manifold? And any tips i should know when swapping it?
Are you adding a supercharger?
__________________
www.jannettyracing.com
Celebrating 34 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 01-06-2020, 07:31 PM   #3
TheDamme94
 
Drives: 2016 D1X Procharged Black 1SS
Join Date: Jun 2018
Location: Alabama
Posts: 93
Yes sir, D1X head unit with stage 2 intercooler system, i actually found the MAP sensor location when i took off the cover for the IM, guess using my eyes first would've been smarter than asking a dumb question haha
TheDamme94 is offline   Reply With Quote
Old 01-08-2020, 07:58 AM   #4
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,072
Quote:
Originally Posted by TheDamme94 View Post
Yes sir, D1X head unit with stage 2 intercooler system, i actually found the MAP sensor location when i took off the cover for the IM, guess using my eyes first would've been smarter than asking a dumb question haha
Do you also have the DSX Baro Break out harness?

What fuel system upgrades to you have?

180 Thermostat?

Spark plugs?
__________________
www.jannettyracing.com
Celebrating 34 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 01-08-2020, 12:06 PM   #5
TheDamme94
 
Drives: 2016 D1X Procharged Black 1SS
Join Date: Jun 2018
Location: Alabama
Posts: 93
Have that baro breakout coming in today along with a few other pieces of misc stuff including a new thermo, currently running 4.5 pulley with dual meth system until i can get my hands on DSX aux lowside, LT4 HPFP and injectors. Spark plugs are NGK 6510s gapped to 0.030 as per tuners orders
TheDamme94 is offline   Reply With Quote
Old 04-26-2020, 10:48 PM   #6
s3rics213
 
Drives: 2019 1LE/ss 2014 ss/rs summit white
Join Date: May 2016
Location: new mexico
Posts: 95
Quote:
Originally Posted by TheDamme94 View Post
Have that baro breakout coming in today along with a few other pieces of misc stuff including a new thermo, currently running 4.5 pulley with dual meth system until i can get my hands on DSX aux lowside, LT4 HPFP and injectors. Spark plugs are NGK 6510s gapped to 0.030 as per tuners orders
Did you have a check engine light after tuning? we have a similar setup but I keep getting codes for Baro and mass air. I also get a pc00a code and seems like the meth could be causing it through electrical. Whats yours powered through.
__________________
2019 ss/1LE d1x, LT4 fuel System, dual meth nozzle, ported LT2 IM, 2” Texas speed headers.
760/670 on E46/meth
710/630 on 93/meth
s3rics213 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2020, vBulletin Solutions, Inc.