01-21-2021, 09:45 PM | #1 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Help with Roll Racing!
I’ll be doing some rolls in Mexico. I have only roll raced a couple of cars with my current set up. Long story short, 200 mile Rally round trip.
For reference: Ported SC Cam Meth Headers 103 TB Big Gulp 9.17 and 2.3 pulleys Car makes over 750whp/wtq. Tires will be 325/30/20. Rolls will be 50 or 60mph starting. Any etiquette I should know? What tire pressures? What settings? (Traction control on or off, street, track, touring). Most of the cars are in the 600whp range but a few are 800-900hp. Just some fun with friends. Lol! Any advice is appreciated. |
01-21-2021, 10:24 PM | #2 |
Drives: 2017 ZL1 Join Date: Aug 2020
Location: Lakeside, Az
Posts: 491
|
From all the u tube vids I'd say go on 2 is the normal etiquette.
|
01-21-2021, 11:07 PM | #3 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
I haven’t had my A10 for a couple years, but I would start in manual mode in the best gear, be cruising at the start speed, and as soon as the race starts, bump the stick back into auto mode. Then win!
|
01-22-2021, 06:51 AM | #4 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
|
01-22-2021, 07:50 AM | #5 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
Tune Manual mode so you don't have to worry moving it back to drive and it will still shift. Game changer for roll racing.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
01-22-2021, 09:37 AM | #6 |
ALWAYS-N-BOOST
|
This made me Laugh - FACTS!!!!
__________________
2012 1LS M6 Black-Sold 2013 2LT M6 BluRay- Sold 2015 1SS 1LE M6 Black-Sold 2021 ZLE A10 Riverside Blue - Awaiting Arrival 01/10 |
01-22-2021, 09:41 AM | #7 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
With only 750 hp, the Mexico racers here wouldn't let you join them. I think they start at 1000hp
Quote:
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
01-22-2021, 09:55 AM | #8 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
No Nannies on for me.. What RPM would you start from? ... sometimes I start in the 5500 rpm range but, I have to shift so soon I get a huge jump and sometimes I start lower range little sluggish and pull ahead right at time of shifting. I haven't had the courage to no lift shift yet from fear of spinning out bit im pushing a few hundred more than you.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
01-22-2021, 10:02 AM | #9 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Leave it in Drive but use paddles to get in right gear (50mph should be 4th) and it will shift
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
01-22-2021, 10:07 AM | #10 |
Previously CS10SS
Drives: 2017 ZL1 A10 Join Date: Jan 2017
Location: Toledo, OH
Posts: 293
|
Can you elaborate on this? What do you mean by Tune manual mode?
__________________
'02 Trans AM - sold
'05 SRT4 - sold '05 STI - sold '96 300ZX - sold '10 2SS/RS M6 455rwhp - sold '13 ZL1 M6 720rwhp - sold '17 ZL1 A10 930rwhp - Katech Built |
01-22-2021, 11:10 AM | #11 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
Read attached
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
01-22-2021, 11:18 AM | #12 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,080
|
|
01-22-2021, 11:28 AM | #13 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,558
|
The article answers your question.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
01-22-2021, 11:53 AM | #14 |
Previously CS10SS
Drives: 2017 ZL1 A10 Join Date: Jan 2017
Location: Toledo, OH
Posts: 293
|
__________________
'02 Trans AM - sold
'05 SRT4 - sold '05 STI - sold '96 300ZX - sold '10 2SS/RS M6 455rwhp - sold '13 ZL1 M6 720rwhp - sold '17 ZL1 A10 930rwhp - Katech Built |
|
|
Post Reply
|
|
|