04-15-2022, 12:03 PM | #113 |
Drives: Chevy 2019 Camaro 2ss Join Date: Feb 2021
Location: OH
Posts: 40
|
questions for anyone's help! did the 1le full fave lift on a 2022 zl1. when you went to put the bumper back on did you have problems with the finder to bumper area coming together? did you have to remove anything from the front for it to sit flush? I have a fairly large gap on each side, and my screws don't line up with the tabs under the bumper
Please let me know!! thanks |
04-15-2022, 01:50 PM | #114 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Probably have the tabs where the screws go or vs versa or the tab bent over show the gap
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-15-2022, 02:33 PM | #115 | |
Drives: Chevrolet Camaro, Ford Mustang Join Date: Oct 2019
Location: AZ
Posts: 388
|
Quote:
Check the factory brake ducts up front, those can get 'caught' in the mis alignment as well. Best regards, Dave
__________________
2022 SS 1LE - Vivid Orange - SCCA CAM-C & Optima Ultimate Street Car GT
Katech, MSD, QA1, Hurst, Anderson Composites, ProParts USA Custom Suspension, MFR Engineering, Forgeline Wheels, G-Loc Brakes, Nine Lives Racing, MTX Audio, Penske Rapid Repair |
|
04-16-2022, 12:18 AM | #116 |
Drives: Chevy 2019 Camaro 2ss Join Date: Feb 2021
Location: OH
Posts: 40
|
Hopefully the pictures load, but the gaps are there, I had to tight them down to the max and still didn’t close the gap, and the bottom tabs don’t line up at all! I’m gonna give it another look when I pop it off.
|
04-16-2022, 06:10 AM | #117 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Must not be seated good could be the foam support popped out a little
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
04-16-2022, 07:19 AM | #118 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
NateMaro: Did you put a ZL1 1LE OEM front fascia on your SS with the SS front fenders or the wider ZL1 fenders?
|
04-16-2022, 10:28 AM | #119 |
Drives: Chevy 2019 Camaro 2ss Join Date: Feb 2021
Location: OH
Posts: 40
|
|
04-16-2022, 02:14 PM | #120 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Side marker small bolts have some adjustments to them or the alignment plastic pins are not seated good or right.. the fender should draw on tight with 10mm bolts to close that gap and the 3 small 8mm bolts should make it flush near the side marker to fix that gap.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-01-2022, 01:49 PM | #121 |
Drives: 2020 camaro ss 1le Join Date: Jul 2021
Location: Florida
Posts: 27
|
Hey guys,
Was wondering can the ZL1 1LE OEM front splitter be removed without removing the front bumper? Thanks |
04-08-2023, 11:09 AM | #122 |
Drives: 2020 ZL1 A10; Shadow Gray Metallic Join Date: Sep 2020
Location: Chicago
Posts: 142
|
Did anyone skip buying the 1LE wiring harness? I just electric taped the DRL connector and zip tied it to the bumper. I figured this would be an open circuit and wouldn’t cause an issue. But I just had a “Battery Saver Active” pop up on the dash and wondering if it’s draining the battery somehow.
|
04-08-2023, 02:10 PM | #123 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
04-08-2023, 03:11 PM | #124 |
Drives: 2020 ZL1 A10; Shadow Gray Metallic Join Date: Sep 2020
Location: Chicago
Posts: 142
|
Thanks, I thought so. My infotainment system was staying on so I’m hoping that was the culprit for the drain. Updated it and it turned off. Will measure the voltage tonight to see if it continues to drop.
|
04-12-2023, 04:22 AM | #125 |
ZL1 Driver
Drives: Camaro ZL1 & BMW M3/E92 Join Date: May 2009
Location: PA
Posts: 487
|
|
04-12-2023, 10:17 AM | #126 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,150
|
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
|
|
Post Reply
|
|
|