[mrusse0213]

Originally Posted by 1sickzl1

Looks really good, awesome fitment! Are you lowered at all?

Yes lowered on H&R springs lowered the car 1.25" (Part #50770 specifically for FE4 MRC equipped cars), have a few BMR goodies on the rear as well. Lower & upper trailing arms, upper control arms, bushing cradle lockout kit, rear tow rods & Rear cradle front side support braces. Thank you

[mrusse0213]

Originally Posted by FH212

You nailed it. Your car looks amazing!

Thanks its always a risk or gamble not exactly knowing when you order your wheel colors and offsets how it will turn out looking in the end. I'm super happy with the look & appreciate the compliment.

[mrusse0213]

Few more shots

[Richiefcknrich]

Originally Posted by mrusse0213

Just got these installed yesterday and spent about a half day playing with the camber to get the stance and look just right. One thing I can say is I’m blown away with BC Forged and Cole Young. My build is 20x10 & 20x12 HCA381S in brushed bronze face with polished black lip and black hardware. Wheels are flush with the fender as you’ll see. Car has the -1.8 street camber in the front and the track setup on the rear at -2.0 to get them flush at the top of the fender. Wheels were expected to ship around 5 week mark and I had these in less than 4 weeks with custom offsets for the rears. Weather has been miserable here overcast and cloudy these wheels are pretty dark and you need some sun to really see how magnificent they are. Enjoy the pics I’ll post more when our weather breaks and we’ve got some sunshine to really show off the stunning bronze. Tires are Toyo R888R 285/30/20 & 325/30/20

Absolutely amazing looking! Looks wicked man!

[sspddmn]

Looks so awesome! Does your tires rub the fender when you hit dips? I had 315 35 20 tires on from my 5th gen z. it was rubbing a lot on dips. I just finally swapped out the tires to 6th gen z specs 305 30 20 in the back. I was worried that even 315 30 20 would still rub. I'm not even lowered.

[mrusse0213]

Originally Posted by Richiefcknrich

Absolutely amazing looking! Looks wicked man!

Thank you

[mrusse0213]

Originally Posted by sspddmn

Looks so awesome! Does your tires rub the fender when you hit dips? I had 315 35 20 tires on from my 5th gen z. it was rubbing a lot on dips. I just finally swapped out the tires to 6th gen z specs 305 30 20 in the back. I was worried that even 315 30 20 would still rub. I'm not even lowered.

It actually doesn't rub with the track camber in the back but it is close, like really close. (without the 1LE -2.0 camber it would 100% rub) In hindsight now if I had to do it over again I'd order the rears with an offset of +48 or +50 in the rear because there's still plenty of room on the inside to accommodate a bit more offset and bring it in just a tad more. I don't drive the twisties too much I'm more of a straight line guy. I think if you put it threw the paces on turns you may end up with a slight rub but nothing major on my current setup.

[sspddmn]

Originally Posted by mrusse0213

It actually doesn't rub with the track camber in the back but it is close, like really close. (without the 1LE -2.0 camber it would 100% rub) In hindsight now if I had to do it over again I'd order the rears with an offset of +48 or +50 in the rear because there's still plenty of room on the inside to accommodate a bit more offset and bring it in just a tad more. I don't drive the twisties too much I'm more of a straight line guy. I think if you put it threw the paces on turns you may end up with a slight rub but nothing major on my current setup.

I see. Nice!

[mrusse0213]

Some more random shots

[mrusse0213]

Went out for a drive this afternoon temps got down to 50 degrees at the end and the car was a handful to drive under boost. Took some random shots, Enjoy

[mrusse0213]

No matter what angle you look at the car these wheels are bad assery. Haven’t been able to really get a good shot of the rear yet but it looks meaty and menacing with 325’s

[sspddmn]

Bro you're killing it with these wheels. If i ever have to get new wheels I'm pretty sure I'm getting these in all brushed bronze. Let me know if you ever want to trade

[Chrome383Z]

Are you lowered any?

[mrusse0213]

Originally Posted by sspddmn

Bro you're killing it with these wheels. If i ever have to get new wheels I'm pretty sure I'm getting these in all brushed bronze. Let me know if you ever want to trade

My phone really doesn’t do brushed bronze any justice either it’s a deep rich color and being brushed on adds another level of contrast to it you just can’t see in the pics very well. It’s a beautiful color & depending on the lighting takes on a few different tones from lighter looking to darker.