07-27-2021, 08:44 PM | #197 |
Drives: 2020 Chevy Camaro SS Join Date: Jul 2020
Location: NOVA
Posts: 23
|
New wheels and tires advise…. I know I know NOT Another one
Ok, Now that i have my power mods on the way, i want to get new tires and wheels for my 2020 SS non 1LE. Looking to go as wide as possible with the 20” wheels while maintaining stock MRC height and do like the wheels to protrude a bit from the fender.
What will be the width and offset i can run with out having any issues or rubbing or scrapping?? Any possibility to fit a 20x 11 ?? Offset front and 20x 12 ?? Offset rear?? |
09-18-2021, 02:04 PM | #198 | |
Drives: Rapid Blue 2022 Camaro 1SS Join Date: Sep 2021
Location: Waterloo, Iowa
Posts: 204
|
Quote:
__________________
9/9/2021 - 1100 (date of deposit)
10/15/2021 - 2000 11/4/2021 - 3100 Status TPW 11/15 11/9/2021 - 3400 Status TPW 11/15 11/24/2021 - 3800 Status built 11/21/2021 12/2/2021 - 5000 Status 12/13/2021 - 6000 Status |
|
12-14-2021, 07:46 AM | #199 |
Drives: Chevrolet Camaro 3LT RS Join Date: Dec 2021
Location: Shreveport
Posts: 1
|
Fitment on front for 2022 3LT
Can anyone tell me if a 9.5” wheel and 275/35 tires will fit on the front of a 2022 3LT, RS without rubbing oe sticking out past the fenders?
|
02-05-2022, 04:25 PM | #200 | |
Drives: 2020 Chevy Camaro ZL1 Join Date: Aug 2020
Location: Ontario
Posts: 19
|
Quote:
|
|
03-02-2022, 01:17 PM | #201 |
Drives: 2019 camaro 2SS 6MT Join Date: Mar 2022
Location: Long island
Posts: 2
|
Looking to buy drag pack
Im looking to run a 17x10 forgestar with MT 305/45/r17… the backspacing on the wheels i want is +45mm but stock is +43mm. Tire size chart tells me that the new setup would be .68 inches closer to inner fender. Anyone know if this will be a problem? Thanks in advance!
‘19 shadow gray 2ss |
04-12-2022, 10:44 AM | #202 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
I went a little away from the usual 305/30/20 and 285/30/20 and got a little taller tire in the rear for more bite and forward grip for launching.
I am running Michelin PS4S 305/35/20 and 275/35/20 combo and love it. The car is also lowered with H&R lowering springs with Chevrolet lowering struts / shocks to compliment the lowered ride height. I'll get some good pics up soon but I love the ride and performance of this setup. It's mainly a street car but the tires get pushed regularly. This is a 1SS, not a 1LE
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms Last edited by WillyZ83; 04-13-2022 at 08:51 AM. |
04-13-2022, 08:52 AM | #203 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
Updated the thread, sorry for the crappy iphone pic
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
04-23-2022, 11:58 AM | #204 |
Drives: Cadillac Escalade, 2018 SS 1LE Join Date: Apr 2021
Location: Bozeman, MT
Posts: 82
|
20x10 20x12 setup 2018 1LE
BC Forged HCA381S
Front 20x10 +20 Toyo R888R 285/30/20 camber -1.8 Rear 20x12 +43 Toyo R888R 325/30/20 camber -2.0 |
04-26-2022, 11:13 AM | #205 |
Drives: '17 2SS Vert H50, A8, F55, NPP Join Date: Jan 2018
Location: NW PA
Posts: 179
|
Anyone able to confirm 245/45/20 on 9"+35 will fit on front of MRC stock ride height without rubbing? Found tires on clearance in this size.
Thanks! |
05-29-2022, 11:54 AM | #206 |
Drives: '17 2SS Vert H50, A8, F55, NPP Join Date: Jan 2018
Location: NW PA
Posts: 179
|
|
06-27-2022, 10:17 PM | #207 |
Drives: '22 Camaro ZL1 1LE A10 Join Date: Jul 2021
Location: SoCal
Posts: 310
|
Advan GT Beyond 20x9.5 +20 (plus a 5mm spacer)/20x11 +35 wrapped in Michelin Pilot Sport Cup 2 285/30 & 325/30
|
06-28-2022, 06:15 PM | #208 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Oh man the tires came in and that’s a badass setup!
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
06-28-2022, 11:14 PM | #209 |
Drives: '22 Camaro ZL1 1LE A10 Join Date: Jul 2021
Location: SoCal
Posts: 310
|
|
07-28-2022, 02:15 PM | #210 |
Drives: 17 Camaro SS Join Date: Nov 2019
Location: Central VA
Posts: 117
|
When you were measuring did you check to see if an 18x12 would fit the back. I think it needs like a 52 bs. One of the guys on here says he's running 17s on the back so I guess I should be able to use 18s.
__________________
Flow Tech axle back, Roto-Fab, Nick Williams 103, AEM Wide Band, Defrost vent pod, billet catch can, BBK long tube headers and NGK LTR6GP, #90198, one step colder, Magnuson 2650, Snow Performance water/methanol injection. (Also tune myself w/HPTuners)
|
|
|
Post Reply
|
|
|