[Glen e]

Looking at the car from the front ...on the extreme left, use a flashlight from the back.....

[Night Vision Universe]

Originally Posted by Glen e

Looking at the car from the front ...on the extreme left, use a flashlight from the back.....

Not sure what u mean as far as using a flashlight from the back.


How about the big gap where I can see the garage floor, it's in the back of the motor, in line with the Camaro emblem on front fender.

[Glen e]

If the wire goes thru, then ok....

[Night Vision Universe]

Got it through, one last question. My positive wire has a fuse at the end. Which does that go directly into the fuse box. I assumed I would just have a positive terminal to hook up to one of the positive nuts next to fuse box??

[Glen e]

The is a general kit, you need to crimp on a ring terminal on the fuse to the box.

[Night Vision Universe]

Seems to be working great. Thanks for all the help Glen

[Glen e]

Excellent...... yep, if you follow the calibration in the vid perfectly, its a great device......

[bpang1234]

http://www.curb-alert.com/order.php - it was sold out for a little while but he seems to have re-stocked.

FYI - there is no "Mini" or "Pro" version anymore from what I can tell so I went with the "Universal" + LED.

Glen E - Would you change anything about how you mounted your's if you had the OEM front splitter? I have it and wonder if I should angle the sensor downwards to clear the splitter.

[Glen e]

No calibration change Needed, works fine with splitter, i also have one.

[mxair2001]

Originally Posted by bpang1234

http://www.curb-alert.com/order.php - it was sold out for a little while but he seems to have re-stocked.

FYI - there is no "Mini" or "Pro" version anymore from what I can tell so I went with the "Universal" + LED.

Glen E - Would you change anything about how you mounted your's if you had the OEM front splitter? I have it and wonder if I should angle the sensor downwards to clear the splitter.

I got mine from http://www.corvettemods.com/. They have it for $129.99 plus a 5% off discount that pops up on the site.

[bpang1234]

Originally Posted by Glen e

No calibration change Needed, works fine with splitter, i also have one.

Thank you sir!

Originally Posted by mxair2001

I got mine from http://www.corvettemods.com/. They have it for $129.99 plus a 5% off discount that pops up on the site.

Well that's just confusing.

[Night Vision Universe]

This thing has been nothing but disappointing. I have calibrated it following the online video and numerous online manuals. It beeps to let me know it is calibrated and beeps when I start the car so I know it's getting power. But most of the time it fails to alert me of the curb that is right in front of me. Kinda sorry I bought this thing. Might have to rip it out and return it.

Before I do, any help would be appreciated

Thanks

[Modshack]

Originally Posted by Night Vision Universe

This thing has been nothing but disappointing. I have calibrated it following the online video and numerous online manuals. It beeps to let me know it is calibrated and beeps when I start the car so I know it's getting power. But most of the time it fails to alert me of the curb that is right in front of me. Kinda sorry I bought this thing. Might have to rip it out and return it.

Before I do, any help would be appreciated

Thanks

Sounds like you have an aim problem...Re-do that whole procedure. YOu should know when it's working if you go through the steps..

[Night Vision Universe]

Originally Posted by Modshack

Sounds like you have an aim problem...Re-do that whole procedure. YOu should know when it's working if you go through the steps..

I did twice, aimed it so it alerts when I am about 12 inches away and 4 inch high curb. Just not sure what else to do