[MTS2020]

Sean do you mind taking a straight no angle side shot of you car with that wicker on? I'm loving that thing

[G2K]

*Reviving an old thread*

Anyone got close up shots of the bolts? I bought a used one need to purchase the rivnuts also notice these bolts are silver and on the picture all I see are black

[Vaider]

To the OP, nice ride. Which tail lights do you have? They look great with the Nightfall Gray.

[Ryanbabz71]

Originally Posted by G2K

*Reviving an old thread*

Anyone got close up shots of the bolts? I bought a used one need to purchase the rivnuts also notice these bolts are silver and on the picture all I see are black

Sent from my iPad using Tapatalk Pro

[GTSLOW]

I guess I'm the odd one out. All I see is a spoiler bolted to a spoiler.

[z28pat]

Originally Posted by GTSLOW

I guess I'm the odd one out. All I see is a spoiler bolted to a spoiler.

Glad I’m not the only one who doesn’t like it , to each their own and the beauty of owning the car is that you can do whatever looks good to you.
To me it seems like an afterthought piece after all the performance they got out of the 1le from great parts (mrc, brakes, wheel/tire combo, seats, elsd )

[Tim M]

Like or not, great that Chevy offers an actual aero part - Gurney flap that provides significant down-force (relatively) without much increase in drag.

I might buy one just to have...wonder how much it would reduce top-speed.

[G2K]

Originally Posted by Ryanbabz71

Sent from my iPad using Tapatalk Pro

Thanks for the pic, is this an OEM one? or one of the ZL1addons site?

I also noticed this is an allen type bolt...

[Ryanbabz71]

Originally Posted by G2K

Thanks for the pic, is this an OEM one? or one of the ZL1addons site?



I also noticed this is an allen type bolt...

The GM accessory.


Sent from my iPad using Tapatalk Pro

[Warrior102]

Originally Posted by z28pat

Glad I’m not the only one who doesn’t like it , to each their own and the beauty of owning the car is that you can do whatever looks good to you.
To me it seems like an afterthought piece after all the performance they got out of the 1le from great parts (mrc, brakes, wheel/tire combo, seats, elsd )

A modern version of let's just bolt this here...

[Gen6_1Le]

Originally Posted by GTSLOW

I guess I'm the odd one out. All I see is a spoiler bolted to a spoiler.

That's about all it is , yet can do so much for a car .

I added a video on how it became to be .

[SloCal]

Originally Posted by RUQWIKR

After having the wickerbill sitting in the shop for a few months, I finally installed it Monday and took pics today. With multiple car projects, kids, family items, work, etc., I'm a bit slow at times. I do think it is BY FAR, in my opinion, the best looking vs. the aftermarket ones seen so far.

As far as what it does to the balance with added downforce without more front splitter to offset, I'm going to do some experimenting.

The ride height sensors have a voltage range when key on of 0.25 to 4.75V, the higher the lower the ride height. One of these days, I'll make a run on smooth road at a given (high) speed and get readings from the front and rear with and without the wickerbill on. I can see what it does to the ride height trims at speed. You could do the same with another car with a different wickerbill / splitter set up to compare.

I'll also take some readings at full jounce and rebound to get the ride height to voltages for each corner. May take a while to do this due to my work and home schedule, but, it will be good to know. Any of that will be skewed by current vehicle weight (fuel load, junk in the trunk, etc.).

Did you ever do testing on this?

[NeverDie]

Originally Posted by GTSLOW

I guess I'm the odd one out. All I see is a spoiler bolted to a spoiler.

Looks like landscape edging to me

[Wvdirtroads]

Will this fit on a 2019?