Push Bar / Brush Bar / bumper guard?

GT_Indy · 01-08-2019, 08:39 PM

I'm interested in finding a push bar, bumper bar, or bumper guard for my 2017 Camaro RS.

I saw this thread:
https://www.camaro5.com/forums/attac...1&d=1365323680

I've been looking online without luck, I'm open to a place that can make a custom one.
Not trying to go for the police look, but Want to give it something with light pods or a light bar.

It would help protect the front from jack rabits and also allow me to mount lights.

Hoping I can make it mount through the lower grill and not have to put holes in the nose.

ChickenPoop · 01-08-2019, 08:50 PM

Check Go Rhino. That's what my old SO had on the front of the 3 Camaro SS's we had.

GT_Indy · 01-08-2019, 08:54 PM

Were they able to find a bolt on option or did it require some mods to the bumper / bumper guard?

Evil-Bee-NH · 01-09-2019, 01:22 AM

I had one on my 5th Gen. There is no option yet for the 6th Gen I do believe you could buy one from either Go Rhino, Go Industries or Setina Manufacturing but you would have to get brackets custom fabricated. That said you do need to remove the plastic crash absorber/wire holder from the fascia but that's not needed after you reinforce your front end with a push bumper. Typically any shop that does construction vehicle or law enforcement can drop ship order them for you.

mdhopt36 · 01-09-2019, 04:27 AM

Looks pretty cool.
Put feelers on the bottom for touching curbs when parking.

GT_Indy · 01-11-2019, 12:46 AM

Thanks for the information.
I will check out those places.
I like the curb feeler idea, something small though for that.

Silverado57 · 01-11-2019, 05:36 AM

I can't decide if that looks badass or ridiculous. Following.
I put a nudge bar on my Silverado, had it powder coated from black to match the truck. I eventually added a light bar.

I also like the curb feeler idea, that's been on my mind.

GT_Indy · 01-12-2019, 11:45 PM

Yah I really want a good way to mount a light bar, something that looks nice.
The brush guard I like because local cyotes and jack rabits can really destory the front of a camaro if one pops out on the 70 mph highway.
The deer and donkeys are worse, and horses.
I kinda live in truck country where 4x4 is required by law in some areas during winter, and some roads are dirt/gravel and I have a camaro. lol.

PatrioticLEO · 07-16-2019, 07:04 PM

Please tell me someone found out how to get the push bars onto the 6th gens... I would love to do this!

TheRedhead · 08-03-2019, 11:06 AM

01-08-2019, 08:39 PM	#1
GT_Indy Drives: 2017 Camaro RS Fifty Edition. Join Date: Jan 2019 Location: Nevada Posts: 4	Push Bar / Brush Bar / bumper guard? I'm interested in finding a push bar, bumper bar, or bumper guard for my 2017 Camaro RS. I saw this thread: https://www.camaro5.com/forums/attac...1&d=1365323680 I've been looking online without luck, I'm open to a place that can make a custom one. Not trying to go for the police look, but Want to give it something with light pods or a light bar. It would help protect the front from jack rabits and also allow me to mount lights. Hoping I can make it mount through the lower grill and not have to put holes in the nose.

01-09-2019, 01:22 AM	#4
Evil-Bee-NH 603 Camaros Drives: 2017 NGM I4 1LT Coupe Join Date: May 2012 Location: Manchester, NH Posts: 6,779 View My Garage	I had one on my 5th Gen. There is no option yet for the 6th Gen I do believe you could buy one from either Go Rhino, Go Industries or Setina Manufacturing but you would have to get brackets custom fabricated. That said you do need to remove the plastic crash absorber/wire holder from the fascia but that's not needed after you reinforce your front end with a push bumper. Typically any shop that does construction vehicle or law enforcement can drop ship order them for you. __________________ MY 2017 I4 CAMARO BUILD JOURNAL \| YOUTUBE \| INSTAGRAM \| 316RWHP - 385 RWTQ HPTUNERS DYNO TUNE \| 12.693s @ 105MPH 1/4 Mile

01-11-2019, 05:36 AM	#7
Silverado57 Drives: 2017 Camaro SS Join Date: Nov 2018 Location: East Tennessee Posts: 522	I can't decide if that looks badass or ridiculous. Following. I put a nudge bar on my Silverado, had it powder coated from black to match the truck. I eventually added a light bar. I also like the curb feeler idea, that's been on my mind. Attached Images __________________ Kevin Luceo Non Uro Last edited by Silverado57; 01-11-2019 at 05:49 AM.

01-08-2019, 08:50 PM	#2
ChickenPoop Account Suspended Drives: 2019 Plum Crazy Scat Pack Charger Join Date: Jul 2018 Location: South Ga. Posts: 263	Check Go Rhino. That's what my old SO had on the front of the 3 Camaro SS's we had.

01-08-2019, 08:54 PM	#3
GT_Indy Drives: 2017 Camaro RS Fifty Edition. Join Date: Jan 2019 Location: Nevada Posts: 4	Were they able to find a bolt on option or did it require some mods to the bumper / bumper guard?

01-09-2019, 04:27 AM	#5
mdhopt36 Drives: '17- 1ag37 V6 traded, for 1SS 2018! Join Date: Mar 2018 Location: MA Posts: 469	Looks pretty cool. Put feelers on the bottom for touching curbs when parking.

01-11-2019, 12:46 AM	#6
GT_Indy Drives: 2017 Camaro RS Fifty Edition. Join Date: Jan 2019 Location: Nevada Posts: 4	Thanks for the information. I will check out those places. I like the curb feeler idea, something small though for that.

01-12-2019, 11:45 PM	#8
GT_Indy Drives: 2017 Camaro RS Fifty Edition. Join Date: Jan 2019 Location: Nevada Posts: 4	Yah I really want a good way to mount a light bar, something that looks nice. The brush guard I like because local cyotes and jack rabits can really destory the front of a camaro if one pops out on the 70 mph highway. The deer and donkeys are worse, and horses. I kinda live in truck country where 4x4 is required by law in some areas during winter, and some roads are dirt/gravel and I have a camaro. lol.

07-16-2019, 07:04 PM	#9
PatrioticLEO Drives: 2018 Camaro 2SS Join Date: Jul 2018 Location: NH Posts: 43	Please tell me someone found out how to get the push bars onto the 6th gens... I would love to do this!

User Name		Remember Me?
Password