[Modshack]

Originally Posted by fastball

You miss the point -

I'm not sure who missed the point. There is a bunch of stuff in that bag that is SUPPOSED to be installed at PDI. Only the front track brake ducts and small splash shields should be left for the customer to install or not.

[fastball]

Originally Posted by Modshack

You may or may not have them depending on how much attention the PDI dept paid to their instructions. If you don't have them, I'd complain. The reason being is that lower suspension pieces are usually the first to chip or rust

Your suspension components are aluminum. They will not rust.

[Modshack]

Originally Posted by fastball

Your suspension components are aluminum. They will not rust.

Uh, NO. The lower locating arms/spring perches are stamped steel (painted), NOT aluminum.

(Hub and bearing carriers are aluminum though)

[fastball]

Originally Posted by Modshack

I'm not sure who missed the point. There is a bunch of stuff in that bag that is SUPPOSED to be installed at PDI. Only the track brake ducts and splash shields should be left for the customer to install or not.

Right I was just talking about the suspension and brake covers.

[Adrian97c]

Found my poppers under the trunk carpet woot!!!


Sent from my iPhone using Tapatalk

[Adrian97c]

Originally Posted by TSloper

I had to replace one. I'll get you the correct part number tonight. The one the dealer will give you is NOT correct.

Oh ok, thanks! Let me know just incase the bag I found in trunk are wrong.

[2fast4mom]

I'm taking delivery of a 2016 2SS next week and this thread has been very helpful. I will definitely make sure these parts are either installed or left in the trunk!

[TSloper]

11612035

The dealer will tell you 11589292. It is the old version and not what the vehicle originally comes with.

[Whis]

Originally Posted by Modshack

I'm not sure who missed the point. There is a bunch of stuff in that bag that is SUPPOSED to be installed at PDI. Only the front track brake ducts and small splash shields should be left for the customer to install or not.

Can we get clarification on what IS and IS NOT supposed to be installed at PDI?

Took me until fastball's post to even get a bit more clarity and I would like to know specifically what "Stuff" you're talking about

[Adrian97c]

Needs to be installed:
The rear suspension cover & the front tire deflector shown on front end pic, one each side.


Sent from my iPhone using Tapatalk

[Modshack]

Originally Posted by Adrian97c

Needs to be installed:
The rear suspension cover & the front tire deflector shown on front end pic, one each side.

And the only things NOT installed would be the Track air deflectors and small splash shields.

If you do not live in a front plate state do not allow them to install the front plate holder.

Mats should be in the car, Funnel and Tow hook should be stowed in the trunk under the carpet.

[Adrian97c]

Originally Posted by Modshack

And the only things NOT installed would be the Track air deflectors and small splash shields.



If you do not live in a front plate state do not allow them to install the front plate holder.



Mats should be in the car, Funnel and Tow hook should be stowed in the trunk under the carpet.

Also... Front matts only, no rear matts on gen6... Unless you bought "premium matts" for $140-170.

[fastball]

Originally Posted by Adrian97c

Needs to be installed:
The rear suspension cover & the front tire deflector shown on front end pic, one each side.


Sent from my iPhone using Tapatalk

No, none of the covers NEED to be installed.

[Adrian97c]

Originally Posted by fastball

No, none of the covers NEED to be installed.

Have that in writing somewhere? OP & I are convinced that the rear suspension covers are supposed to be installed...

Would like GM clarification if possible. Thx