01-04-2016, 10:11 PM | #1 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
Paint issues, clear coat / haze problems and rough patches (Update 4/8/16)
I had posted a few details around my clear coat issue, but I have a feeling this is the case with a lot of cars going through the extended QC hold.
First off my car had a nice brown tint to it when it arrived with a coating of dirt all over. Upon its first wash the dirt mostly came off, but the clear coat is showing haze spots and even flat spots all over. After the dealer performed their first cleaning it was clear the clear coast had a lot of issues. They washed and clayes it per their normal procedure. Even more so the black trim on the rear diffuser has grime build up that looks set into the clear coating. Overall the car has about 4 dozen marks all over. The dealer has set an appointment to do a polish to see if it resolves all the problems, but even they think aspects of the car will require possibly a wet sand or even a full clear coat application. Redoing the clear almost scares me at this point.
__________________
Last edited by Sledgehammer70; 04-08-2016 at 05:53 PM. |
01-04-2016, 10:16 PM | #2 |
Drives: 2016 Camaro SS - A8, MRC, NPP Join Date: Apr 2009
Location: DE
Posts: 549
|
That looks like contaminants got in the base coat and they just cleared over it. Not sure wet sanding or buffing is going to make that any better. Hopefully it all works out for you.
|
01-04-2016, 10:40 PM | #3 |
#becauseracecar
Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015
Location: Phoenix
Posts: 2,959
|
Wow, that's really bad. I can't believe that made it through QC!
|
01-05-2016, 01:23 AM | #4 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
That could have been one of the issues they pulled alot of the first cars. Paint problems.
Not uncommon. Some of the programming for the robots might have been incorrect.
__________________
|
01-05-2016, 03:29 AM | #5 |
Drives: Nightfall Gray 2LT RS Join Date: Aug 2012
Location: Cincinnati, Ohio
Posts: 638
|
Man that sucks Sledge, hope you'er detailer can work some real magic, but looks like it's going to take more than a detailer to get those fixed.
__________________
My Build Journal, Review, and Photos: Here |
01-05-2016, 05:16 AM | #6 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I had a 2011 GMC Sierra that had tiny brown specks all over it when I picked it up. The dealer sent it to a very reputable body shop. They called it railroad dust that comes off the wheels of the railroad cars during shipping. They were able to get it out, I think they had to wet sand it. They said the had to do this quite often. I don't know if that's the issue for yours or not. Just wanted to put that out there. That's pretty pathetic paint job, wasn't yours delayed or sitting waiting to be shipped for a while?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-05-2016, 06:07 AM | #7 |
Drives: Waiting on my 2016 Camaro 2SS Join Date: Dec 2015
Location: North Carolina
Posts: 497
|
My black has hazy spots on the front left fender. Mine was long QC hold.
|
01-05-2016, 06:48 AM | #8 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Looks like the hood is no in alignment either.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
01-05-2016, 05:49 PM | #9 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
If that is why they pulled it, they did a terrible job fixing it.
__________________
|
01-05-2016, 06:06 PM | #10 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
That's not rail dust, which can be clay bared off. Looks like some other issue, hard to see in pics. But if the dealer is willing to pay for a wet sanding at a good shop, do it. When done right, wet sanding will make paint look fantastic...
|
01-06-2016, 03:19 PM | #11 |
I posted about a similar issue with my white SS and many people on this forum told me it was done at the dealer. The dealer could not fix it, they had to pay a professional detailer who at least made it more tolerable.
__________________
2016 White 2SS with black spears, split spoke black rims, NPP, black bowties and more.
|
|
01-06-2016, 03:21 PM | #12 |
Drives: '95 Corvette, '06 Mustang, 2LT RS Join Date: Dec 2015
Location: Alabama
Posts: 428
|
Isn't this something that, if you notice it before taking delivery, you can refuse it because of? I realize you can't expect "perfect", but that's just -wrong-.
|
01-06-2016, 03:51 PM | #13 |
Drives: 2016 Camaro SS - A8, MRC, NPP Join Date: Apr 2009
Location: DE
Posts: 549
|
I'll be looking at my car very closely and if the paint isn't to my liking they can keep it. Simple as that.
|
01-06-2016, 11:39 PM | #14 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
Update: Dealer called to have me bring the car in on Tuesday next week. They are giving me a rental car at no cost while they work on it. They stated they would like to clean, clay, and polish the car and if that doesn't resolve it, they will wet sand and polish it.
My dealer has a very very good body and paint shop they run themselves and I used before for other cars and for my paint job on my ZL1 front end swap. Let's see what happens.
__________________
|
|
|
Post Reply
|
|
|