Pillar style for single gauge

Psychosocial · 02-11-2020, 07:41 PM

Wrapping up my Procharger install and I'm interested into adding a gauge. Maybe the Banks iDash. Having a hard time finding someone selling the pillar style mounts for a single gauge. Any suggestions?

Jb54 · 02-11-2020, 07:59 PM

Hi: Not a true pillar pod but jreracingcom has a really trick one that mounts to the defrost vent on the dash by the pillar pod. $124.95. Hope this helps.

parbreak · 02-11-2020, 08:17 PM

Quote:

Originally Posted by Psychosocial

Wrapping up my Procharger install and I'm interested into adding a gauge. Maybe the Banks iDash. Having a hard time finding someone selling the pillar style mounts for a single gauge. Any suggestions?

ZZPerformance. I have the dual gauge pillar pod and it fits like a glove. Completely replace the stock pillar trim.

https://zzperformance.com/collection...uge-pillar-pod

biker2k · 02-11-2020, 10:47 PM

p3 gauges for me was best way to go
still keeps vent functionality

parbreak · 02-12-2020, 05:11 PM

Quote:

Originally Posted by biker2k

p3 gauges for me was best way to go
still keeps vent functionality

I have the P3 too but it's going to be used primarily for ethanol content and it's other features. I have AEM boost and AFR gauges on the new pillar pod.

Psychosocial · 02-12-2020, 06:30 PM

Quote:

Originally Posted by parbreak

ZZPerformance. I have the dual gauge pillar pod and it fits like a glove. Completely replace the stock pillar trim.

https://zzperformance.com/collection...uge-pillar-pod

Looks great! Not sure I can afford 2 gauges. Looks like they only offer the single for the cadillac ats.

Psychosocial · 02-12-2020, 06:32 PM

Quote:

Originally Posted by biker2k

p3 gauges for me was best way to go
still keeps vent functionality

That does look really nice.

biker2k · 02-12-2020, 10:08 PM

Quote:

Originally Posted by Psychosocial

That does look really nice.

thanx
I really hate gauge pods and thought this was great alternative

JANNETTYRACING · 02-13-2020, 07:42 AM

Quote:

Originally Posted by Jb54

Hi: Not a true pillar pod but jreracingcom has a really trick one that mounts to the defrost vent on the dash by the pillar pod. $124.95. Hope this helps.

Thanks yes we carry single and dual pods as well as the Pillar pods.

https://jannettyracing.com/products/...16-2018-camaro

https://jannettyracing.com/products/...-camaro-ss-zl1

https://jannettyracing.com/products/...od-2016-camaro

Psychosocial · 02-15-2020, 08:14 PM

Is the single gauge in the defrost vent sturdy enough to allow you to push the buttons on the banks iDash?

JANNETTYRACING · 02-17-2020, 12:02 PM

Quote:

Originally Posted by Psychosocial

Is the single gauge in the defrost vent sturdy enough to allow you to push the buttons on the banks iDash?

I guess that depends on A how hard the buttons are to push, and B how hard you push on the buttons.

Ted.

DorkMissile · 02-17-2020, 10:01 PM

Quote:

Originally Posted by Psychosocial

Is the single gauge in the defrost vent sturdy enough to allow you to push the buttons on the banks iDash?

I have a dual gauge pod that goes in the defrost vent. AEM wideband in the lower hole, iDash in the upper.

I never had much luck gettin the pod to stay put using the snap in tabs - so what I did is drilled a small hole in one of the ribs on the underside of the pod, then looped a wider zip-tie thru the hole. I then strapped the zip tie around one of the metal braces in the dash that you can see on the left side of the dash once you remove the side cover.

Thing is locked in solid now.

Markoz28 · 02-18-2020, 07:25 AM

Quote:

Originally Posted by DorkMissile

I have a dual gauge pod that goes in the defrost vent. AEM wideband in the lower hole, iDash in the upper.

I never had much luck gettin the pod to stay put using the snap in tabs - so what I did is drilled a small hole in one of the ribs on the underside of the pod, then looped a wider zip-tie thru the hole. I then strapped the zip tie around one of the metal braces in the dash that you can see on the left side of the dash once you remove the side cover.

Thing is locked in solid now.

Any pics of this?

KPzypher · 02-18-2020, 11:56 AM

What dual gauge combo is everyone running with their FI setup? AEM + idash above sounds like a great combo.

02-11-2020, 07:41 PM	#1
Psychosocial Drives: Chevrolet Camaro Join Date: Jun 2019 Location: Indiana Posts: 51 View My Garage	Pillar style for single gauge Wrapping up my Procharger install and I'm interested into adding a gauge. Maybe the Banks iDash. Having a hard time finding someone selling the pillar style mounts for a single gauge. Any suggestions?

02-11-2020, 07:59 PM	#2
Jb54 Drives: 2019 Camaro SS M6 Join Date: Jan 2020 Location: Nebraska Posts: 181	Hi: Not a true pillar pod but jreracingcom has a really trick one that mounts to the defrost vent on the dash by the pillar pod. $124.95. Hope this helps. Last edited by Jb54; 02-11-2020 at 08:04 PM. Reason: Correction

02-11-2020, 10:47 PM	#4
biker2k Drives: 2018 2ss 1le Join Date: Jan 2018 Location: Huntington, NY Posts: 474	p3 gauges for me was best way to go still keeps vent functionality Attached Images __________________ 2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp Jannetty Motorsports tuned

02-15-2020, 08:14 PM	#10
Psychosocial Drives: Chevrolet Camaro Join Date: Jun 2019 Location: Indiana Posts: 51 View My Garage	Is the single gauge in the defrost vent sturdy enough to allow you to push the buttons on the banks iDash?

02-18-2020, 11:56 AM	#14
KPzypher Drives: 2020 Camaro 2SS 1LE M6 Join Date: Oct 2019 Location: NC Posts: 33	What dual gauge combo is everyone running with their FI setup? AEM + idash above sounds like a great combo.

User Name		Remember Me?
Password