01-20-2022, 10:53 PM | #15 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Completed the install today. Pretty happy with them, install was straight forward, 1/2" of preload to get the front ride height. Should be around 4 degrees of camber, alignment tomorrow and track day Saturday.
|
01-21-2022, 10:38 AM | #16 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
goodluck be safe! i did -3.5 front and -2.5 rear and car feels pretty damn good fyi
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-21-2022, 08:02 PM | #17 |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 290
|
Nice lmk how it is.
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
01-23-2022, 12:36 AM | #18 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Unfortunately I only got 1 session in today, and two laps of another. It was enough to figure out the car was having a little oversteer and very light in the rear under hard braking. 3 clicks more of rebound and 4 of compression really dialed it in. Overall I was really impressed with how well the car performed, and a slight adjustment made a huge difference in settling the rear down.
I lost 3 of my 4 sessions today, one for sound on my 1st lap and two red flags. I still got a personal best despite some traffic, and was really confident I could have shaved away a few more seconds, just didn't get the chance. Having only one session makes it kinda hard to make a fair judgement, but I can tell you my confidence in the car was really high after my session. I have zero regrets going with these 2 ways, and I'll be signing up for a day at Sonoma as soon as I can so I can get these really dialed in. The one ways were great!! But I feel like these may just have transformed the car. As far as settings, I started with 14 clicks of rebound and 8 compression at all 4 corners, ended up moving the front to 17/12. |
01-23-2022, 02:11 PM | #19 |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 290
|
That sucks that you barely got seat time, but that sounds solid. I cant wait for a track day, my roads are all salted and its 15 degrees outside now haha. How does it ride on the street with those settings?
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
01-23-2022, 02:20 PM | #20 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
I didn't drive it on the street more than a few hundred feet. Towed it to the shop for the alignment and to the track. I'm sure you can dial back the stiffness of them but I don't think it's going to be a plush ride. The 1 ways were very good for that. Pretty comfortable ride on the street on soft and then you can stiffen them up enough for a track day. I'm not sure these will give the same kind of flexibility.
More and more it's becoming just a track car. Half cage going in next month. |
01-24-2022, 11:05 AM | #21 | |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
Quote:
then time for some real coilovers? haha
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
|
01-24-2022, 01:35 PM | #22 | |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 290
|
Quote:
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
|
01-24-2022, 02:13 PM | #23 | |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Quote:
I think I'm going to end up being really happy with the valving on these. My only gripe is the difficulty of adjusting the rears. You pretty much have to take the wheel off. I have extenders I can put on the reservoir, but the one on the bottom of the shock at the control arm is tucked in there just enough that it's hard to get a grip on it to spin. |
|
01-24-2022, 02:22 PM | #24 | |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
Quote:
goodluck getting that cage my buddy ordered one and it took him about a year or so hope it doesnt take that long
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
|
01-24-2022, 05:39 PM | #25 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Man I hope it's not that long. It's only been 6 weeks, they told me a few more weeks and I'll have it. Hopefully they weren't lying to me about it. Did they give your buddy the run around?
|
01-24-2022, 05:55 PM | #26 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
yup every time he called or emailed them they told him almost done almost done then bam a year later they finally shipped it out im local to them and i wouldnt even buy from them but goodluck
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-24-2022, 08:17 PM | #27 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Dang, maybe I'll just start asking for a refund now, might get that faster than the cage.
|
01-25-2022, 09:25 AM | #28 | |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 290
|
Quote:
I told them about that rear adjuster from the first set, I recommended a star shape or a different location but I don't think the engineers where about it. Is your front shock at full height? I was going to recommend have they extend the front travel some more.
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
|
|
|
Post Reply
|
|
|