FS: Various parts

RobZL1 · 10-06-2023, 04:09 PM

Parts for sale after my 2650 install:

All asking prices INCLUDE shipping to the CONUS unless noted.
Venmo or PayPal- you cover any fees, please.
If you'd like multiple items, let's work out a deal!
Pictures are at the end of the post.

1) Ported stock throttle body - $125
see this thread

2) Magnuson 2650R snout - $150
Brand new for stock 87mm TB. Replaced with the 103 snout when I put on the 2650

3) HP Tuners RTD Gen3 - $150
Brand new. Magnuson branded.
Can be used with HP Tuners VCM Suite Scanner software. This would be a cheap way to gain access to the power of HPT's scanner, without need to spend twice this amount. Then, if you want to get a remote tune from someone on the RTD tuner network, you'll already have the RTD!

4) Magnuson air intake elbow - $60
Brand new. Designed for direct replacement of stock elbow with stock TB (also works with stock blower), but has larger clean-side port, is thicker, and has less "junk" on the inside. Would be a nice addition for someone with a cut stock airbox but spinning the stock blower harder and trying to keep a stock look. I pulled the coupler from the clean-side port, so you'd need to add whatever you want there to mate with your setup.

5) Stock airbox, filter and elbow - $125 + actual shipping (to get you the best deal)

6) Miscellaneous parts - make me an offer, or just cover packing/shipping and spot me a few bucks to pay for my gas to the UPS store and back.

(a) coil pack covers
(b) LT4 valley cover insulation/sound material
(c) LT4 fuel line from HPFP to firewall fuel line
(d) stock blower belt
(e) brake booster line with check valve
(f) evap line
(g) clean side separator to air intake elbow line

ZeroC · 11-15-2023, 01:29 PM

pmd

arpad_m · 11-15-2023, 06:38 PM

PM sent

RobZL1 · 11-17-2023, 01:10 PM

Quote:

Originally Posted by ZeroC

pmd

Quote:

Originally Posted by arpad_m

PM sent

PM's received. Traveling this week. I'll get back to you guys soon!

arpad_m · 11-17-2023, 05:17 PM

Quote:

Originally Posted by RobZL1

PM's received. Traveling this week. I'll get back to you guys soon!

Thanks for pinging us back

I can wait.

ZeroC · 11-19-2023, 05:08 PM

I just need the maggie intake hose and the stock one with the clamps
Dont need the air box however

ZeroC · 12-04-2023, 10:31 AM

?

Brandonew · 01-17-2024, 10:26 AM

Still got the rtd? If so I will take it

10-06-2023, 04:09 PM	#1
RobZL1 fo'shizZL1 Drives: 2017 ZL1 Join Date: Aug 2017 Location: ATL Posts: 1,281	FS: Various parts Parts for sale after my 2650 install: All asking prices INCLUDE shipping to the CONUS unless noted. Venmo or PayPal- you cover any fees, please. If you'd like multiple items, let's work out a deal! Pictures are at the end of the post. 1) Ported stock throttle body - $125 see this thread 2) Magnuson 2650R snout - $150 Brand new for stock 87mm TB. Replaced with the 103 snout when I put on the 2650 3) HP Tuners RTD Gen3 - $150 Brand new. Magnuson branded. Can be used with HP Tuners VCM Suite Scanner software. This would be a cheap way to gain access to the power of HPT's scanner, without need to spend twice this amount. Then, if you want to get a remote tune from someone on the RTD tuner network, you'll already have the RTD! 4) Magnuson air intake elbow - $60 Brand new. Designed for direct replacement of stock elbow with stock TB (also works with stock blower), but has larger clean-side port, is thicker, and has less "junk" on the inside. Would be a nice addition for someone with a cut stock airbox but spinning the stock blower harder and trying to keep a stock look. I pulled the coupler from the clean-side port, so you'd need to add whatever you want there to mate with your setup. 5) Stock airbox, filter and elbow - $125 + actual shipping (to get you the best deal) 6) Miscellaneous parts - make me an offer, or just cover packing/shipping and spot me a few bucks to pay for my gas to the UPS store and back. (a) coil pack covers (b) LT4 valley cover insulation/sound material (c) LT4 fuel line from HPFP to firewall fuel line (d) stock blower belt (e) brake booster line with check valve (f) evap line (g) clean side separator to air intake elbow line Attached Images __________________ 2017 ZL1 M6 Black \| Maggie 2650 // 103TB // Big Gulp Past Rides- 2014 ZL1 M6 Red Hot \| Tons of mods 2004 CTS-V M6 Silver \| Many mods 1995 Corvette M6 Torch Red \| A few more mods 1992 Camaro M5 White \| A few mods

11-15-2023, 06:38 PM	#3
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,619 View My Garage	PM sent __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

11-15-2023, 01:29 PM	#2
ZeroC Drives: 18 2SS LT4 Top Join Date: Jan 2014 Location: Fraser Valley Canada Posts: 245	pmd

11-19-2023, 05:08 PM	#6
ZeroC Drives: 18 2SS LT4 Top Join Date: Jan 2014 Location: Fraser Valley Canada Posts: 245	I just need the maggie intake hose and the stock one with the clamps Dont need the air box however

12-04-2023, 10:31 AM	#7
ZeroC Drives: 18 2SS LT4 Top Join Date: Jan 2014 Location: Fraser Valley Canada Posts: 245	?

01-17-2024, 10:26 AM	#8
Brandonew Drives: Chevy camaro Join Date: Feb 2022 Location: El Paso Posts: 16	Still got the rtd? If so I will take it

User Name		Remember Me?
Password