08-07-2019, 10:50 AM | #1 |
Drives: 2017 2SS Camaro Join Date: Mar 2015
Location: British Columbia
Posts: 366
|
how much Dynomat do I need?
How many SQFT do I need to do this car? Looking to do full trunk (lid, wheel wells, floor), both doors, rear shelf and rear quarters. This car rattles a ton without a sub and I plan on adding a couple. Rattles are driving me NUTS and my OCD is kicking into overdrive.
__________________
2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.
|
08-07-2019, 11:48 AM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
talk to a local stereo shop they can help but doubt any of us have any idea lol
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
08-07-2019, 01:16 PM | #3 |
Drives: 2017 2SS Camaro Join Date: Mar 2015
Location: British Columbia
Posts: 366
|
Meh...it was worth a try.
__________________
2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.
|
08-07-2019, 01:47 PM | #4 |
Drives: 2016 2SS M6 Mosaic Blk Met-SOLD Join Date: Jun 2016
Location: KY
Posts: 2,934
|
I'm pretty sure I remember a thread with someone doing a full install. Have you searched yet?
__________________
Official Detailer of CamaroFest 8 & 9
https://www.autogeekonline.net/forum...st-8-pics.html https://www.camaro6.com/forums/showt...=521655&page=1 https://www.camaro6.com/forums/showt...=547470&page=1 https://www.camaro6.com/forums/showthread.php?t=527474 No one on Earth has detailed more Camaros. http://KirkTheDetailer.com |
08-07-2019, 01:51 PM | #5 | |
Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017
Location: San Gabriel, CA
Posts: 992
|
Quote:
The combination of these 3 will yield maximum results. https://www.sounddeadenershowdown.com/
__________________
'17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq)
'14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK |
|
08-07-2019, 10:09 PM | #6 |
Drives: 2017 2SS Camaro Join Date: Mar 2015
Location: British Columbia
Posts: 366
|
Yes I have searched and read through almost every thread in the A/V section. Plenty of useful info here. But I couldn't find any specific SQFTage for this query. I have purchased 36 SQFT. (9 sheets of 18x36") in hopes that I get solid coverage. Waiting on delivery. However, I took some measurements this afternoon, and I think I might only have enough for the trunk and rear quarters. Probably going to be a little short for the doors. This stuff is not cheap. Only want to buy what I need.
__________________
2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.
|
08-07-2019, 10:24 PM | #7 | |
Drives: 2017 2SS Camaro Join Date: Mar 2015
Location: British Columbia
Posts: 366
|
Quote:
__________________
2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.
|
|
08-08-2019, 01:00 AM | #8 | |
Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017
Location: San Gabriel, CA
Posts: 992
|
Quote:
Nice! Take pics along the way... it’s both the process AND the end result that I love 🍻
__________________
'17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq)
'14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK |
|
08-08-2019, 03:41 PM | #9 |
Drives: 2018 1ss Join Date: Jan 2016
Location: Lancaster,PA
Posts: 14
|
I used 36sq feet for my eclipse when I had it. Did doors, hatch, and trunk. Only thing that vibrated was my mirrors after that. I used second skin tho better quality than most of the name brands out there. I'd say you'd need more than that if you plan to do the floor and stuff.
|
08-08-2019, 04:35 PM | #10 |
Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017
Location: San Gabriel, CA
Posts: 992
|
https://www.sounddeadenershowdown.co...oupe-2010-2015
OP, this was a great thing done by the authors of this website. Breakdown of multiple vehicles and what you need for a perfect interior. this is for 5th gen Camaro, but the amounts are probably pretty much the same as the vehicle hasn't changed that much
__________________
'17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq)
'14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK |
08-09-2019, 09:14 PM | #11 | |
Drives: 2017 2SS Camaro Join Date: Mar 2015
Location: British Columbia
Posts: 366
|
Quote:
__________________
2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.
|
|
|
|
Post Reply
|
|
|