Modern SS emblems on a heritage grill? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CDN SS · 02-20-2011, 12:36 PM

Can the modern SS emblems pictured below be mounted in the center of the heritage grill? If so pics would be greatly appreciated.

BackinBlackSS/RS · 02-20-2011, 12:48 PM

That one there is upside down. The best 5th gen bar none is at this site for the center fo the Heritage grill.

http://www.sparksrestorations.com/

Inferno Orange SS · 02-20-2011, 12:57 PM

I agree !

midnighter · 02-20-2011, 12:59 PM

I like that.

Inferno Orange SS · 02-20-2011, 01:07 PM

I like the white SS badge but to me it still looks like a part from an early model Camaro put on a new modern car. I have seen certain color Camaros pull it off quite nicely, but im still happy with mine on IOM. Not to mention now the badge on the front matches the badge on the back.

http://www.sparksrestorations.com/ !

CDN SS · 02-20-2011, 01:21 PM

Quote:

Originally Posted by Inferno Orange SS

I like the white SS badge but to me it still looks like a part from an early model Camaro put on a new modern car. I have seen certain color Camaros pull it off quite nicely, but im still happy with mine on IOM. Not to mention now the badge on the front matches the badge on the back.

http://www.sparksrestorations.com/ !

Yours is IOM? It's not listed on the Sparks website. How does it mount to the heritage grill?

BTW, thanks for the pic and the link.

Inferno Orange SS · 02-20-2011, 01:30 PM

No sorry I meant the car is IOM, the badge from sparks is red like the one on the rear deck of the car, but I think the red badge compliments the IMO nicely. It mounts the same way the factory bow-tie does, just sandwich plate between the front and back of the grill. I believe most people remove the grill to install but luckily my hand was small enough to fit in the hole for the latch pin of the hood and it took me about 10 min to remove and reinstall the new one.

CyberDan · 02-20-2011, 02:09 PM

I own spark restorations front heritage grille Emblem and the deck lid emblem, both are of highest quality.... Couldn't be happuer

camaroMSUfan · 02-21-2011, 11:13 AM

Are the modern ss badges the same size of the bowtie?

BackinBlackSS/RS · 02-21-2011, 11:17 AM

Quote:

Originally Posted by camaroMSUfan

Are the modern ss badges the same size of the bowtie?

On the rear they are almost the the exact same size. Not quite as tall.
On the front, the Heritage grille SS is not as big as the bowtie. There will be a SS available soon for the stock grille, but I don't know the size of it. This is the one I will be getting for the front.

Inferno Orange SS · 02-21-2011, 11:19 AM

The sparks ss badge is quite a bit smaller then the oem bow tie, also one of the reasons I wanted it. I found the bow ties on the car way to large and over played, but again thats just my opinion everyone has their own.

ZED SLED · 02-21-2011, 11:23 AM

This is from an '07 Impala SS. About $20/pair on e-bay. They are 1 inch tall and 4 inches wide. The Trailblazer SS is a little larger

Havnaparty · 02-21-2011, 04:15 PM

That looks sweet on the Heritage grill

Havnaparty · 02-22-2011, 12:28 PM

Will the emblem with the sticky tape work?

02-20-2011, 12:36 PM	#1
CDN SS Steve from Canada. Drives: 2010 SW SS/RS with Inferno package. Join Date: Mar 2009 Location: Niagara Ontario Canada Posts: 1,969 View My Garage	Modern SS emblems on a heritage grill? Can the modern SS emblems pictured below be mounted in the center of the heritage grill? If so pics would be greatly appreciated. __________________

02-20-2011, 02:09 PM	#8
CyberDan Drives: 1SS Camaro Join Date: Sep 2010 Location: Texas Posts: 661	I own spark restorations front heritage grille Emblem and the deck lid emblem, both are of highest quality.... Couldn't be happuer __________________ CAI Cold Air Intake, VMax CNC TB, Borla Sport Catback Exhaust, EE Oil Catch Can, Eibach Sway Bars and Drop Springs, AAC concept side markers, stealth signal bulbs, Heritage grille, Sparks Restorations front and rear modern SS emblems

02-21-2011, 11:13 AM	#9
camaroMSUfan Drives: 2SS/RS Silver Ice Metallic Join Date: Dec 2009 Location: Philadelphia, Mississippi Posts: 117	Are the modern ss badges the same size of the bowtie? __________________ Mods: Borla S-type exhaust tinted windows Kicker CVR 10" subwoofer Planet Audio 400 watt amp Custom Built Box for amp/sub Cold Air Inductions C.A.I

02-21-2011, 11:23 AM	#12
ZED SLED Drives: 2017 Mosaic Bk ZL1 M6 Join Date: Jul 2009 Location: South of Raleigh, NC Posts: 9,477 View My Garage	This is from an '07 Impala SS. About $20/pair on e-bay. They are 1 inch tall and 4 inches wide. The Trailblazer SS is a little larger Attached Images __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[COTW: 5/10/10] Bolt-ons done - GFX, Heritage, TT2 wheels, SLP spoiler, SS emblems	MR. FBDY	Camaro Photos \| Spyshots \| Video \| Media Gallery	54	05-01-2013 01:01 PM
New Grill and Emblems for SS	Harley99	USA - California	10	04-25-2012 09:24 AM
Who lost the bowtie off their Heritage grill?	2010SSRSM6	USA - California	15	01-02-2011 05:08 PM
FS: Stock Grill with emblems	invisobril	Exterior Parts & Accessories	0	03-07-2010 05:16 PM
Summit White SS with Heritage and NLP Spoiler	racer50200	Cosmetics and Lighting Modification Discussions	37	03-03-2010 02:07 PM

02-20-2011, 12:48 PM	#2
BackinBlackSS/RS Go Blue!!!!! Drives: 2012 Cruze LT Join Date: Mar 2009 Location: Indiana Posts: 23,290	That one there is upside down. The best 5th gen bar none is at this site for the center fo the Heritage grill. http://www.sparksrestorations.com/

02-20-2011, 12:57 PM	#3
Inferno Orange SS Drives: 2010 Camaro 2SS LS3 Join Date: Aug 2010 Location: Thunder Bay Canada Posts: 150 View My Garage	I agree !

02-20-2011, 12:59 PM	#4
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,906	I like that.

02-20-2011, 01:07 PM	#5
Inferno Orange SS Drives: 2010 Camaro 2SS LS3 Join Date: Aug 2010 Location: Thunder Bay Canada Posts: 150 View My Garage	I like the white SS badge but to me it still looks like a part from an early model Camaro put on a new modern car. I have seen certain color Camaros pull it off quite nicely, but im still happy with mine on IOM. Not to mention now the badge on the front matches the badge on the back. http://www.sparksrestorations.com/ !

02-20-2011, 01:30 PM	#7
Inferno Orange SS Drives: 2010 Camaro 2SS LS3 Join Date: Aug 2010 Location: Thunder Bay Canada Posts: 150 View My Garage	No sorry I meant the car is IOM, the badge from sparks is red like the one on the rear deck of the car, but I think the red badge compliments the IMO nicely. It mounts the same way the factory bow-tie does, just sandwich plate between the front and back of the grill. I believe most people remove the grill to install but luckily my hand was small enough to fit in the hole for the latch pin of the hood and it took me about 10 min to remove and reinstall the new one.

02-21-2011, 11:19 AM	#11
Inferno Orange SS Drives: 2010 Camaro 2SS LS3 Join Date: Aug 2010 Location: Thunder Bay Canada Posts: 150 View My Garage	The sparks ss badge is quite a bit smaller then the oem bow tie, also one of the reasons I wanted it. I found the bow ties on the car way to large and over played, but again thats just my opinion everyone has their own.

02-21-2011, 04:15 PM	#13
Havnaparty Drives: 2010 2SS/RS Transformer Edition Join Date: Feb 2011 Location: Ohio Posts: 51 View My Garage	That looks sweet on the Heritage grill

02-22-2011, 12:28 PM	#14
Havnaparty Drives: 2010 2SS/RS Transformer Edition Join Date: Feb 2011 Location: Ohio Posts: 51 View My Garage	Will the emblem with the sticky tape work?