HEX Vents Temperature Data

[edgehead2000]

Originally Posted by Rod Knock

If you decide to come to the Texas State wide event in April 2013 and will be doing installs I will be the first to order a set of HEX Vents and send you payment. I'm sure you would sell more than a few sets here at the event. I'll attempt several things myself but cutting body parts isn't one of them.

http://www.camaro5.com/forums/showthread.php?t=259264

Agreed! I'll drive to San Antonio to get this installed.

[cornfield camaro]

Originally Posted by Steve@HPE

Thanks...the hoods seal on these newer cars very well, it's like an oven in the engine compartment.

Well, just pull off the rear hood seal. You can put it back on easily when not going for it. I did it my GN and it cools the engine off a bunch. You have to run the a/c on recirc to prevent smelling engine fumes.

[STINGER BEE]

I diffidently like to get a set of those, are they still available.Thanks

Originally Posted by 67motorcat

Wow looks great guys!

Since this thread is about Temp Data,I must say my underhood temps are WAY lower.

When I pulled in the garage today I didn't get that "Blast" of hot air like I usually do.Plus you can really see the heat waves coming out the vents when your at a stop light!

Great product Mr.Hines

[JANNETTYRACING]

Originally Posted by STINGER BEE

I diffidently like to get a set of those, are they still available.Thanks

As far as I know yes, we just haven't sold any in a while

Give my sales team a call and they can help you 203-753-7223

[1JEWLDSSRS]

These vents are no longer in production, haven't been for several years. Last time I chatted with Steve Hines, the guy who made these and installed many of them for us, said he was having issues with material and production of them and decided to NOT manufacture them anymore. I had a set n my Camaro he installed for me and they worked great, but as all good things, they come to an end. There have been MANY folks on here looking for a set, unless you come across someone selling some, you won't find them. Good luck, took one of my friends a year to find a used set.

[bayarea408]

wish someone had a set laying around, looks easy to 3d scan and print

[1JEWLDSSRS]

Yea, my friend that got that set after a year from a forum member didn't get the drip trays with them or the mounting brackets and made his own and they turned out great. I'm sure if you had a 3D printer and the dimensions for the vents, you could make them.