07-31-2020, 02:07 AM | #1 |
Drives: 2017 Camaro 1ss A8 Join Date: Nov 2019
Location: California
Posts: 114
|
Lowering car with headers?
Hey guys I currently got long tube headers on my car, with stock wheels and stock ride height. I wanna give the car a more aggressive stance as I want to add beefier tires (305’s) rear and (285’s) front, but I’m also planning on adding eibach lowering springs to complete the look. What’s the possibility of my headers scraping compared to stock height. Not trying to go slammed, but I don’t wanna stay at stock ride height. Any of you guys lowered with long tubes? Thank you
|
07-31-2020, 04:24 AM | #2 |
Ghost Spawn
Drives: Camaro Join Date: Jan 2019
Location: East Coast
Posts: 538
|
You'll be fine. I have LTs and I'm lowered 2.5-3" with coilovers and have never scraped. I've personally never seen any LTs for our cars that go any lower than the rest of the exhaust.
Last edited by Altered Carbon; 07-31-2020 at 08:45 AM. |
07-31-2020, 09:52 AM | #3 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
I have the BMR springs, kooks LT's. They hang just below the level of the rest of the car. I've never had an issue with them hitting, only the front of the car pulling out of parking lots.
|
|
|
Post Reply
|
|
|