What did you do to your 6th Gen Camaro today?! - Page 284

Zzzato · 09-10-2017, 05:34 PM

Quote:

Originally Posted by Johnnyx

Had the factory black wheels powder coated black

I was thinking about doing this. that came out good!! Is this the gloss?

MR 45TH · 09-10-2017, 06:04 PM

Diode Dynamics! Love these things

BAMF · 09-14-2017, 09:08 PM

Hey y'all,

Added the black taillights, including the black 3rd brake light. They look great on NGM. But we have enough pics of those already out there in the world. What I'm really happy with is this addition I did so I can close the trunk lid easily without having to touch the paint anywhere and leaving prints or marks in the dust. I will never understand why my wife's 2012 Cruze has a handle on the inside of the trunk, but the Camaro didn't get anything.

Anyway, handle works great. I added this at the same time I was doing the 3rd brake light. There's already a washer and nut holding the spoiler in place (standard SS spoiler) so I just used that to hold the strap as well. Been running a few weeks, and I've had no issues of the nut becoming loose as of yet. Will update if anything changes.

Expoh · 09-14-2017, 10:14 PM

Installed Borla ATAK NPP without valves! I went from single tips to dual tips!

BlackbeastSS2 · 09-14-2017, 10:49 PM

I added my front air intake to my high rise tunnel ram. Made it myself out of diff parts since Copo parts never checks it messages and e mail. Had to cut, drill and length MAF sensor wires. Sounds way diff then the Roto Fab I had on before, and louder.

camaromike77 · 09-15-2017, 07:26 AM

Quote:

Originally Posted by BAMF

Hey y'all,

Added the black taillights, including the black 3rd brake light. They look great on NGM. But we have enough pics of those already out there in the world. What I'm really happy with is this addition I did so I can close the trunk lid easily without having to touch the paint anywhere and leaving prints or marks in the dust. I will never understand why my wife's 2012 Cruze has a handle on the inside of the trunk, but the Camaro didn't get anything.

Anyway, handle works great. I added this at the same time I was doing the 3rd brake light. There's already a washer and nut holding the spoiler in place (standard SS spoiler) so I just used that to hold the strap as well. Been running a few weeks, and I've had no issues of the nut becoming loose as of yet. Will update if anything changes.

GREAT idea!!! Where did you get the strap from?

soloknight6 · 09-15-2017, 08:37 PM

BLACK BOWTIES AND ZL1 1LE tail lights installed

I'm happy with how everything turned out, took about 30 minutes to do everything properly.

miko3075 · 09-15-2017, 08:58 PM

Quote:

Originally Posted by ride98red

You're a better man than I! If I had a daughter, she wouldn't be allowed to lay on the car! (but I get it and they are great pics)

I had a vanity plate of AM MSSCL. My one buddy says, so your plate says "morning wood?" :/ I dont have that plate anymore.

Love the other meaning of AM MSSCL

Sledgehammer70 · 09-16-2017, 11:29 AM

Dropped her off for Forged internals, new fuel system, completed suspension, new axles and a tune to put her back on E85.

Cchief · 09-16-2017, 12:08 PM

Has anyone replaced the spoiler on a convertible and relocated the am/fm antenna that is in it?

histobeast · 09-16-2017, 04:58 PM

Quote:

Originally Posted by Sledgehammer70

Dropped her off for Forged internals, new fuel system, completed suspension, new axles and a tune to put her back on E85.

Looking forward to a video on that. Please include part details and dyno numbers if ya can. I'm sure you get this a lot but thanks for the content you provide and being an excellent asset to the community.

STYLO LT1 · 09-16-2017, 05:13 PM

Quote:

Originally Posted by Sledgehammer70

Dropped her off for Forged internals, new fuel system, completed suspension, new axles and a tune to put her back on E85.

Sweet!!

Camarolover85 · 09-16-2017, 05:55 PM

Pulled the broken plastic shards out of my headlight.

Sheriff37 · 09-16-2017, 07:53 PM

Quote:

Originally Posted by Expoh

Installed Borla ATAK NPP without valves! I went from single tips to dual tips!

Did you get a new fascia that fits the quad or did you cut your original? I plan to go from single to dual with the S-Type, and I'm not sure I want to tackle cutting mine. Also how do you like the new quad-tip look? I can't wait to see two more pipes every time I take a look at the back of my car.

09-10-2017, 06:04 PM	#3964
MR 45TH Drives: 2018 ZL1 Join Date: Oct 2011 Location: Huntingtown, MD Posts: 1,138	Diode Dynamics! Love these things Attached Images __________________ 2018 ZL1…Many mods to come

09-14-2017, 09:08 PM	#3965
BAMF Drives: The Tumbler Join Date: Mar 2016 Location: California Posts: 500	Hey y'all, Added the black taillights, including the black 3rd brake light. They look great on NGM. But we have enough pics of those already out there in the world. What I'm really happy with is this addition I did so I can close the trunk lid easily without having to touch the paint anywhere and leaving prints or marks in the dust. I will never understand why my wife's 2012 Cruze has a handle on the inside of the trunk, but the Camaro didn't get anything. Anyway, handle works great. I added this at the same time I was doing the 3rd brake light. There's already a washer and nut holding the spoiler in place (standard SS spoiler) so I just used that to hold the strap as well. Been running a few weeks, and I've had no issues of the nut becoming loose as of yet. Will update if anything changes. Attached Images __________________ 2017 NGM 2SS, M6, Adrenaline Red interior, NPP, MRC, and a bunch of other nice stuff.

09-14-2017, 10:14 PM	#3966
Expoh Drives: 2017 Camaro 1SS Join Date: Jul 2017 Location: Dallas, TX Posts: 72 View My Garage	Installed Borla ATAK NPP without valves! I went from single tips to dual tips! Attached Images

09-14-2017, 10:49 PM	#3967
BlackbeastSS2 Drives: 2019 Camaro 1LE Shock Candy Join Date: Mar 2016 Location: Garage Posts: 1,757	I added my front air intake to my high rise tunnel ram. Made it myself out of diff parts since Copo parts never checks it messages and e mail. Had to cut, drill and length MAF sensor wires. Sounds way diff then the Roto Fab I had on before, and louder. Attached Images __________________ LT4 1.7 Supercharger snout ported & Meth 103 Katech TB, KATECH Custom Heads, DSX In-line fuel TSP Headers, Spec P Super Twin Clutch, TSP EL C7 CAM Diamond Piston & Manley Rods, Roto Fab Big Gulp BTR Push Rods,LS7 Lifters, ARP, FI Chiller, Kirkey Seats SJM Line Lock, Hurst Pistol Grip. 747/739 RWHP street tune - 821/794 RWHP track tune 101 octane. 2014 Mini Cooper countryman S All4 M6 daily driver

09-15-2017, 08:37 PM	#3969
soloknight6 SoCal HT5! SD Drives: 2016 red hot 2ss M6 Join Date: Nov 2011 Location: San Diego CA, Posts: 1,929	BLACK BOWTIES AND ZL1 1LE tail lights installed I'm happy with how everything turned out, took about 30 minutes to do everything properly. __________________ http://www.camaro5.com/forums/showth...37#post5437037 By my deeds, I honor him. V8!!!

09-16-2017, 11:29 AM	#3971
Sledgehammer70 Lethal Camaro Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013 Location: Temecula, CA Posts: 3,855 View My Garage	Dropped her off for Forged internals, new fuel system, completed suspension, new axles and a tune to put her back on E85. Attached Images __________________ Thanks My Build Thread \| Lethal Garage YouTube \| Lethal Camaro IG \|

09-16-2017, 12:08 PM	#3972
Cchief Drives: 2017 Fifty 2SS Convertible Join Date: Aug 2016 Location: Southern New Jersey Posts: 179	Has anyone replaced the spoiler on a convertible and relocated the am/fm antenna that is in it? __________________ 2017 2SS 50th anniv. vert. 2017 Jeep Laredo Altitude 2018 MB GLE350

09-16-2017, 05:55 PM	#3975
Camarolover85 Account Suspended Drives: 2019 Dodge Challenger Scat Pack Join Date: Apr 2014 Location: Frederick, Colorado Posts: 1,245	Pulled the broken plastic shards out of my headlight.

User Name		Remember Me?
Password