05-17-2019, 02:15 AM | #1 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Switches
If one of you LS/LT guys that upgraded your knee bolsters still have the original plastic ones, I'd like to get the passenger one for the center console! Dealer can't get them. Probably a factory production only kind of thing.
Or I need a better idea to mount roughly 7 switches/buttons. I don't want cup holder panels, center console panels, guage pod panels. It needs to be temporary, but held in place firmly. My idea is to buy or make a little panel and screw it to a plastic knee bolster on the pass side center console. Could be rigid then, and removable with a custom made harness that I could unplug and hide. Anyone have that piece I need or another solution? No center console, cup holder, guage pod, cigarettes/ac outlet Thanks!
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
05-17-2019, 08:49 AM | #2 |
Nightmare
Drives: Your mom crazy in bed Join Date: Mar 2011
Location: Naptown
Posts: 2,438
|
Or you could just do this..
https://emblempros.com/inc/sdetail/59010 I know you werent looking for one of these...but short of building a custom dock/panel, you arent going to find anything...
__________________
|
05-18-2019, 02:37 AM | #3 | |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Quote:
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
05-18-2019, 11:56 AM | #4 | |
Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017
Location: San Gabriel, CA
Posts: 992
|
Quote:
__________________
'17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq)
'14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK |
|
05-18-2019, 12:06 PM | #5 |
Drives: '17 Red hot 2ss, 16 Focus RS Join Date: Aug 2015
Location: Michigan
Posts: 845
|
Yeah. My 2step I like to be a momentary instead of clutch, and that would be really awkward to hold my arm there then go forward quick to grab 2nd. Lol
__________________
"Spitfire" 427ci
2017 Red Hot 2SS// 6 Piston Brembos//Adrenaline Red Interior, Knee Pads//M6//MRC Afe Air Filter//BMR MM010 Motor Mounts, Safety Loop//Custom OTR Intake//Flex Fuel Kit//Gforce 3.5" Aluminum Driveshaft//GM 95mm TB//Katech Oil Pump, Piston Squirters//Kooks 1-7/8 LT//LT4 Fueling//Mighty Mouse Wild//Monster Clutch LT1-S Triple Disc//MSD 2-Step//Pray Performance Custom Spec Cam, Ported Holley Hi-Ram//Sikky 12" Shifter w OEM Knob Mod//Tick Level 1 Tr6060//Labor by Me//Tune By Pray Performance |
|
|
Post Reply
|
|
|