07-09-2021, 03:10 PM | #1 |
Drives: 21 camaro rs/lt1 Join Date: Feb 2021
Location: montreal
Posts: 30
|
secondary cats delete code p0430
Hi guys today i went to a muffler shop to remove my secondary cats and now my chek engine light is on. I check with a scanner and the codes is p0430 bad catalyst bank 2. is it because it has a leak or i will need a tune to fix it
|
07-09-2021, 03:25 PM | #2 |
Drives: 2020 Camaro SS 1LE Join Date: Aug 2020
Location: Florida
Posts: 107
|
It is leaking at one of the joints. No tune issue. Rear O2's are in front of the secondary cats and only monitor front cat operation.
|
07-09-2021, 03:56 PM | #3 |
Drives: 21 camaro rs/lt1 Join Date: Feb 2021
Location: montreal
Posts: 30
|
|
07-09-2021, 04:15 PM | #4 |
Drives: 2018 Camaro 1SS Join Date: Jun 2018
Location: DFW
Posts: 422
|
I didnt tune mine.
__________________
2018 1SS 6MT: SOLD
|
07-09-2021, 04:26 PM | #5 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
This^^^
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
07-09-2021, 05:52 PM | #6 |
Drives: 21 camaro rs/lt1 Join Date: Feb 2021
Location: montreal
Posts: 30
|
So if we have a leak in the exhaust system even if it's after the o2 it will throw a code?
|
07-09-2021, 06:14 PM | #7 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,862
|
usually just if the leak is close to the sensor (which is monitoring the 1st cat). However, it is possible to damage the O2 sensor if it gets too hot during the re-weld. if your exhaust guy hasn't already welded it up, I'd ask if he can remove the O2 sensor when he plugs that leak he's already identified.
|
|
|
Post Reply
|
|
|