05-27-2021, 05:15 PM | #1 |
Drives: 2021 Camaro LT1 Join Date: Aug 2013
Location: Weehawken, NJ
Posts: 95
|
E85 AFR gauge help?
I'm looking for a gauge for monitor my E85 percentage and my air to fuel ratio. I was lead to the one linked below, so that I wouldn't pay for an extra ethanol sensor, since my Camaro already has the LethalGarage flex fuel kit.
This has me very confused. Anyway, I guess my question is, by purchasing this, how do I hook it up to read my Ethanol content? Does it plug in to my LethalGarage flex fuel kit? Thanks in advance for the help! https://www.summitracing.com/parts/inn-3910 |
05-27-2021, 06:03 PM | #2 |
GM Transmission Tech
|
I read that you tap into the signal wire on the FF sensor. I think it was the white one.
Sent from my HTC U12+ using Tapatalk
__________________
|
06-12-2021, 12:03 AM | #3 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Pretty sure the P3 guage has that capability.
|
06-12-2021, 08:20 AM | #4 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,710
|
Search and you will find numerous threads that discuss wideband sensors. Here is one that works with HP Tuners.
https://www.camaro6.com/forums/showthread.php?t=589523 |
06-12-2021, 10:15 AM | #5 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,219
|
I use a banks idash for all parameters including E85 and then AEM wideband that works with HPTUNERS
|
06-12-2021, 12:28 PM | #6 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
Copycat
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
Post Reply
|
|
|