You are browsing camaro6 
05-16-2023, 02:21 PM
|
#1 |
 Drives: 2022 dodge ram 1500 Join Date: Feb 2023
Location: Alabama
Posts: 33
|
Rotofab for ZL1
Sold my 2ss and bought a ZL1. When you order the rotofab cold air intake does everything you need come with it? Or is there something else that needs to be ordered to put it on? Really just wanting something to make the SC whine a little louder. Thanks for your help and advice.
|
|
|
|
05-16-2023, 02:32 PM
|
#2 |
|
|
Everything you need to install comes in the box. Printed directions are easy to follow.
|
|
|
|
|
05-16-2023, 02:44 PM
|
#3 |
       Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,010
|
I agree with ZL1Ray, that was my experience with RotaFab.
|
|
|
|
|
05-16-2023, 03:51 PM
|
#4 |
|
Drives: 2022 dodge ram 1500 Join Date: Feb 2023
Location: Alabama
Posts: 33
|
Thank you for the feedback. Really appreciate
|
|
|
|
|
05-16-2023, 04:35 PM
|
#5 |
   
Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016
Location: Georgia
Posts: 5,816
|
I like my RotoFab too. Made a slight difference in sound and throttle response! Was it worth the money I spent I would say yes in my case anyway.
__________________
ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.
|
|
|
|
|
05-16-2023, 07:07 PM
|
#6 |
 Drives: 22 ZL1 1LE Join Date: Nov 2014
Location: Miami,FL
Posts: 345
|
CORSA Carbon Intake>>>>
__________________
2015 SS1LE (SOLD)
2016 Charger Hemi (sold) 2020 392 Widebody (lemon) 2021 Hellcat Widebody (Stolen) 2023 (Kia Stinger GT2 (daily) 2022 ZLE (Delivered 05-13-2022) |
|
|
|
|
05-18-2023, 08:57 AM
|
#7 |
 Drives: Chevrolet Camaro Join Date: Sep 2022
Location: WI
Posts: 4
|
What is everyone's take on installing any CAI before the warranty is up? I want to install one of these, but I'm wondering if I should wait until my warranty is up.
|
|
|
|
|
05-18-2023, 11:46 AM
|
#8 |
|
Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 2,010
|
a CAI (and/or exhaust) are pretty benign and acceptable things when it comes to the Powertrain warranty but there's always the risk. You blow an engine and they pop the hood they want to be dicks about it, they can.
|
|
|
|
|
05-18-2023, 12:38 PM
|
#9 | |
|
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,293
|
Quote:
__________________
 |
|
|
|
|
|
05-18-2023, 01:32 PM
|
#10 | ||
|
D3RPZILLA
|
Quote:
__________________
2021 Camaro ZL1 Satin Steel w/a10/PDR/CF/Red Belts/Navigation
Website: z1lla.com | YouTube: youtube.d3rpzilla.com YouTube Playlists: Performance Mods | Interior & Exterior Mods | Other Mods |
||
|
|
|
|
05-18-2023, 01:44 PM
|
#11 |
|
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,062
|
I did not notice any difference with just the Roto Fab other than a slight increase in blower whine. I do like the looks, fits very nicely like it belongs. I suspect it did contribute a few HP when I added my headers, pulley and tune, since the engine could use more airflow with those additional mods. I think a CAI is primarily for looks and sound on a stock vehicle, but it serves as a good building block as mods are added which can take advantage of more air to the engine.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
