04-08-2015, 06:51 PM | #1 |
Drives: 2010 ss rs ls3 red-white rallys Join Date: Oct 2008
Location: Mississippi
Posts: 729
|
Factory spoiler removal
Adding the blade spoiler and have heard about paint issues when removing the stock spoiler...anyone think there is something I can do before I start to remove the stock spoiler to prevent paint issues like putting some wd-40 or some other product and heating it up with a blow dryer? Thoughts?
__________________
eps cam 226/234 lsa 113+2, bfe 1 7/8 headers, rotofab cai, katech oil pump, 444 rwhp, 411 rwtq, eps tune, Blanchard performance install
|
04-08-2015, 10:24 PM | #2 |
Drives: 2010 ss rs ls3 red-white rallys Join Date: Oct 2008
Location: Mississippi
Posts: 729
|
For those that have done the blade install....if there are paint issues, want the new blade spoiler cover it up after installed...
__________________
eps cam 226/234 lsa 113+2, bfe 1 7/8 headers, rotofab cai, katech oil pump, 444 rwhp, 411 rwtq, eps tune, Blanchard performance install
|
04-09-2015, 12:04 AM | #3 |
Drives: 2010 ss rs ls3 red-white rallys Join Date: Oct 2008
Location: Mississippi
Posts: 729
|
Ok I soaked it with wd-40 and put the hair dryer on it and before removing the spoiler and looks good....a little paint around where the bolts go through was a little chipping but the blade spoiler will cover that up...not sure if the wd-40 and hair dryer worked, but I do have a '10 model...
__________________
eps cam 226/234 lsa 113+2, bfe 1 7/8 headers, rotofab cai, katech oil pump, 444 rwhp, 411 rwtq, eps tune, Blanchard performance install
|
04-09-2015, 11:02 AM | #4 |
Drives: 2020 GMC Sierra AT4 Join Date: Jul 2013
Location: Hanover, PA
Posts: 3,278
|
If you are installing a Blade Spoiler if it is the factory 3 piece any blemishes will be covered anyhow. I thought from what I read was the paint chipping issue was a GM issue and that basically either the spoiler is going to chip the paint or it won't and nothing you really can do to change the outcome.
__________________
2023 Camaro 2SS 1LE Summit White
1100 - 3/23/2023 2000 - 3/27/2023 3000 - 3/28/2023 3400 - 4/12/2023 — 4/24 TPW 3800 - 4/28/2023 5000 - 5/30/2023 6000 - 6/03/2023 2020 GMC Sierra AT4 6.2L Black |
04-09-2015, 01:58 PM | #5 |
Drives: 2010 ss rs ls3 red-white rallys Join Date: Oct 2008
Location: Mississippi
Posts: 729
|
When pulling of the factory spoiler I had heard it would bring the paint up with it and there would be spots the blade wouldn't cover...so I heard....all good though, no paint issues.
__________________
eps cam 226/234 lsa 113+2, bfe 1 7/8 headers, rotofab cai, katech oil pump, 444 rwhp, 411 rwtq, eps tune, Blanchard performance install
|
|
|
|
|