Side Marker Black-out Kit @ Phastek Performance

Ricardo@Phastek · 12-18-2015, 05:14 PM

We would like to thank Jack for allowing us to use his 2016 Bumble Bee as our test car for our side marker black-out kit!!

Take your factory side markers and give them a smoked look with our simple 4 piece kit. With about 20 mins of your time you can change the look of your new car!!

We are going to offer a Dark and Light finish option!!

This is transparent material with an adhesive backing that is cut into the side marker pattern that go over your factory lights and allows light to pass thru. This 3 mil thick vinyl comes off as easy as it installs and will not damage the lens in any way.

Kit contents:
Front Driver
Front Passenger
Rear Driver
Rear Passenger

Front Side Marker (Before & After, Dark):

Rear Side Marker (Before & After, Dark):

SS 1LE · 12-18-2015, 05:30 PM

I like that.

jimmypop13 · 12-18-2015, 05:43 PM

Very cool. I need this on my car stat!

cartem2 · 12-19-2015, 03:05 AM

Very nice! How about blackouts for the 3rd break light and the reflectors on the rear bumber?

SS 1LE · 12-19-2015, 08:52 AM

^ Good call on the rear reflectors.

MemBluff23 · 12-19-2015, 09:49 AM

Quote:

Originally Posted by SUMMIT WHITE SS

^ Good call on the rear reflectors.

+2

pkssauce · 12-19-2015, 10:46 AM

I would like to see what they look lIke on too.

Glen e · 12-19-2015, 11:28 AM

They look black on the car.....ill have a pic here this aft....stay tuned....

Sledgehammer70 · 12-19-2015, 11:31 AM

When is this going to be available for purchase?

GMGP5X · 12-19-2015, 11:39 AM

Definitely as must have on the hyper blue, yellow/red do not go with blue very well.

Glen e · 12-19-2015, 12:44 PM

Quote:

Originally Posted by Glen e

They look black on the car.....ill have a pic here this aft....stay tuned....

here you go...this is 3M scotchprint that is opaque, the lights will show brighter thru the stuff Ricardo is using, than what I used here...takes 10 min to install:

233 · 12-19-2015, 01:00 PM

Looks fantastic. How much would it affect the brightness?

Glen e · 12-19-2015, 01:25 PM

Some people are really paranoid, I really don't care, it's bright enough to see them on. Fortunately I live in an area of the country in which you got to be modding to the extreme (limo tint) to get stopped… gotta love South Florida…

jimmypop13 · 12-19-2015, 04:26 PM

Definitely need the third brand light done too! I just want a smoked kit, not blackout.

12-18-2015, 05:14 PM	#1
Ricardo@Phastek Drives: the boss nuts.... Join Date: Aug 2012 Location: Houston, TX Posts: 1,428	Side Marker Black-out Kit @ Phastek Performance We would like to thank Jack for allowing us to use his 2016 Bumble Bee as our test car for our side marker black-out kit!! Take your factory side markers and give them a smoked look with our simple 4 piece kit. With about 20 mins of your time you can change the look of your new car!! We are going to offer a Dark and Light finish option!! This is transparent material with an adhesive backing that is cut into the side marker pattern that go over your factory lights and allows light to pass thru. This 3 mil thick vinyl comes off as easy as it installs and will not damage the lens in any way. Kit contents: Front Driver Front Passenger Rear Driver Rear Passenger Front Side Marker (Before & After, Dark): Rear Side Marker (Before & After, Dark):

12-18-2015, 05:43 PM	#3
jimmypop13 Drives: 2016 camaro ss Join Date: Oct 2010 Location: Spring, TX Posts: 1,127	Very cool. I need this on my car stat! __________________ 2016 camaro 2SS hyper blue/Kalahari, A8, MRC, NPP, sunroof, SW headers through axleback, Circle D 3600rpm TC, Pray ported IM/TB, E85 Sold: 2002 Z28, NBM, M6, 460rwhp, 2009 HHR SS RIP : 2002 WS6 Black, A4, 355rwhp

12-19-2015, 03:05 AM	#4
cartem2 Drives: Nightfall Gray 2LT RS Join Date: Aug 2012 Location: Cincinnati, Ohio Posts: 638 View My Garage	Very nice! How about blackouts for the 3rd break light and the reflectors on the rear bumber? __________________ My Build Journal, Review, and Photos: Here

12-19-2015, 10:46 AM	#7
pkssauce Drives: 2016 Camaro 2SS Join Date: Oct 2015 Location: Seattle Posts: 535	I would like to see what they look lIke on too. __________________ Ordered: 2SS Nightfall Gray, NPP, MRC, navi, auto, low gloss black wheels, black bowties TCFCB4 1000: 12/08/2015 2000: 12/08/2015 3000: 12/10/2015 3000: 12/12/2105 - TPW 1/11/2016 3100: 12/18/2015 - TPW 1/18/2016 3300: 12/23/2015 - TPW 1/11/2016 3400: 12/24/2015 3800: 01/19/2016 4300: 01/20/2016, 4200: 1/28/2016, 4300: 1/29/2016, 4B00: 1/30/2016, 4200: 2/7/2016 (train), 4800: 2/19/2016, 5000: 2/22/2016, 6000: 2/25/2016

12-19-2015, 11:28 AM	#8
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	They look black on the car.....ill have a pic here this aft....stay tuned.... __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

12-18-2015, 05:30 PM	#2
SS 1LE マスタング = 遅い Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015 Location: Florida Posts: 7,061	I like that.

12-19-2015, 08:52 AM	#5
SS 1LE マスタング = 遅い Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015 Location: Florida Posts: 7,061	^ Good call on the rear reflectors.

12-19-2015, 11:31 AM	#9
Sledgehammer70 Lethal Camaro Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013 Location: Temecula, CA Posts: 3,855 View My Garage	When is this going to be available for purchase? __________________ Thanks My Build Thread \| Lethal Garage YouTube \| Lethal Camaro IG \|

12-19-2015, 11:39 AM	#10
GMGP5X Drives: 2011 2LT RS VR 2008 Silverado 2500 Join Date: Sep 2010 Location: Florissant,Mo Posts: 580 View My Garage	Definitely as must have on the hyper blue, yellow/red do not go with blue very well. __________________ 2LT RS VR / ARK DTS Cat back exhaust / Roto-Fab CAI / RPI stealth mud guards /Defender works billet chrome door sills/ DIY painted engine cover, trunk corners, and brake rotors / RX catch can / Team LLT badges. Team LLT

12-19-2015, 01:00 PM	#12
233 Drives: I have a bike. Join Date: Aug 2015 Location: IN Posts: 87	Looks fantastic. How much would it affect the brightness?

12-19-2015, 01:25 PM	#13
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	Some people are really paranoid, I really don't care, it's bright enough to see them on. Fortunately I live in an area of the country in which you got to be modding to the extreme (limo tint) to get stopped… gotta love South Florida… __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant Last edited by Glen e; 12-19-2015 at 02:07 PM.

12-19-2015, 04:26 PM	#14
jimmypop13 Drives: 2016 camaro ss Join Date: Oct 2010 Location: Spring, TX Posts: 1,127	Definitely need the third brand light done too! I just want a smoked kit, not blackout. __________________ 2016 camaro 2SS hyper blue/Kalahari, A8, MRC, NPP, sunroof, SW headers through axleback, Circle D 3600rpm TC, Pray ported IM/TB, E85 Sold: 2002 Z28, NBM, M6, 460rwhp, 2009 HHR SS RIP : 2002 WS6 Black, A4, 355rwhp

User Name		Remember Me?
Password