![]() |
#1 |
![]() Drives: 2017 SS 1LE Join Date: Nov 2020
Location: Georgia
Posts: 9
|
Completely De-badged 1LE
I have learned a ton from searching through this forum and wanted to finally contribute something. It's pretty easy to find pictures of side/rear badges removed and "flow ties" on the front but I have seen very few pictures of front bowtie removed. Here are a couple pics of an after-market upper grille that does not have a bowtie at all, in case someone else is ever curious. I'll also include another shot, just so you have a couple angles in one place.
2017 SS 1LE |
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,090
|
looks pretty cool. Now you gotta find the dark tails and 3rd brake light
__________________
|
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2018 2SS 1LE Black Join Date: Aug 2018
Location: Cape Cod
Posts: 638
|
Looks good. Recent thread discussing the availability of the smoked lamps, it appears GM has pulled the part number for the L/R set sold on the aftermarket but are still available individually. They look nice on darker colors and white although the red ties in with the red calipers, I switch back and forth a few times a year. [IMG]
![]() |
![]() |
![]() |
![]() |
#4 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,564
|
Why would you want to remove all badges?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
![]() |
![]() |
![]() |
#5 | |
2020 Shadow Gray 2SS
Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019
Location: SoCal
Posts: 3,032
|
Quote:
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph... |
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
rear looks cool badgeless the front looks weird lol
__________________
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() ![]() ![]() ![]() Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 1,992
|
I didn't try hard enough on the front so I just plastiDip blacked the bowtie and left the SS in place, pulled the rest of it sides and rear...i've debadged every car the last 20 years except those that have mounting holes in the panels (Mustang...GRRRR)
|
![]() |
![]() |
![]() |
#8 |
![]() Drives: SWXXZL1 Join Date: Jul 2020
Location: the corrupt purple state of az
Posts: 150
|
I removed the ZL1 badges from the rear and hood of my car. I left the bowtie badges on the rear and front grill. I refuse to advertise for a manufacturer unless they pay me. It makes it much easier to wash and polish.
__________________
"Joe" does a hilarious impression of a slinky toy on stairs.
![]() |
![]() |
![]() |
![]() |
#9 |
![]() Drives: 2020 SHOCK SS 1LE Join Date: Sep 2016
Location: Southern California
Posts: 384
|
LOL! Can't tell if you're serious or joking.
|
![]() |
![]() |
![]() |
#10 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,625
|
Well, the bowties are much more of an advertisement than those cryptic ZL1 trim badges... everyone knows the bowtie, but maybe 5% of drivers know what a ZL1 is.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
![]() |
![]() |
![]() |
#11 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '18 1SS 1LE Join Date: Sep 2017
Location: Pennsyltucky
Posts: 2,571
|
I did the third, huge improvement, the tails are still sitting in boxes in the garage. Don't mind the tails that much, might eventually swap them out, but the red third brake light had to go, looked so out of place.
__________________
'18 1SS 1LE Black, PDR
|
![]() |
![]() |
![]() |
#12 |
![]() Drives: 2017 SS 1LE Join Date: Nov 2020
Location: Georgia
Posts: 9
|
Bought the car used a couple of years ago and it had a matte black front bowtie/none on the rear. It struck me as unbalanced so I bought an OEM bowtie and color-matched it to the front. Stuck in on with low-adhesive tape (pictured) and didn't like the look...I guess I got used to the clean back end. I wanted it evened out so I went the other way (i.e. remove all as stated in OP).
I do really like the car in black but you can't get the same cool two-tone effect with black as you do on other colors. (Like it on yours though Warrior, looks mean). ...Just fun to tinker around so maybe I'll put some of those 1LE badges on it at some point. |
![]() |
![]() |
![]() |
#13 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
What you gonna with your badges?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
![]() |
![]() |
![]() |
#14 |
![]() Drives: 2017 SS 1LE Join Date: Nov 2020
Location: Georgia
Posts: 9
|
Blue - I'll keep them in case I want to reverse the changes or provide them to a purchaser of the car (not that I have any intention of doing either right now).
...I like that mug btw |
![]() |
![]() |
|
|
Post Reply
|
Tags |
1le, bow tie removed, de-badged |
|
|