Pedal Covers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

joekono · 12-05-2020, 04:47 AM

With the winter approaching here in the Northeast, I wanted to turn my attention to the interior. I was wondering what pedal covers you use. I see prices from 12 bucks to over $250. I have my eye on a few but I would like opinions of those of you that have them installed. I feel it's a must have when doing your interior but that's just me.

Thanks everyone!!!

camguynj · 12-05-2020, 07:52 AM

Check these out. Black or polished billet aluminum. I’ve got the black

https://www.rpidesigns.com/shop/item...RoC0A4QAvD_BwE

ADVMax · 12-05-2020, 09:40 AM

My quest was function over form or cost. The stock pedal arrangement didn’t allow for comfortable heel/toe on downshift. These were some $12.00 cheap-ass covers from Auto Zone. This was an early mockup photo, final mounting was 3M tape to hold them in lace then screwed down. For my purposes they work perfect and don’t look terrible.

If cost is the question I’ve seen some stupid expensive ones that were ass ugly.

sinlinson · 12-05-2020, 11:01 AM

I got this Drake 3 peice set of Ebay for $81.00. Fits well and looks good. I used the orange inserts to match my interior. There is also a carbon fiber looking insert included.
Easy instalation. Brake and clutch peddel are bolt on, no drilling. Gas peddle was drill and bolt on. The top screw was too short, but other than that it was a good install.
I've already been told about my dirty carpet!!!!!

gm2376 · 12-05-2020, 11:22 AM

no offense, but those are all fugly looking...i would only do these in heel to toe.....but just my opinion.

https://www.srpracing.com/pd_camaro_...ing_pedals.cfm

Sinister10 · 12-07-2020, 07:21 PM

^ those are the ones i have. Tad expensive, but worth it

Silveradoss573 · 12-07-2020, 10:37 PM

I installed the gm pedal covers. They just look right to me but do nothing to help with heel/toe.

12-05-2020, 04:47 AM	#1
joekono Drives: Camaro Convertible 2014 1LT Join Date: May 2019 Location: New Jersey Posts: 1,013 View My Garage	Pedal Covers With the winter approaching here in the Northeast, I wanted to turn my attention to the interior. I was wondering what pedal covers you use. I see prices from 12 bucks to over $250. I have my eye on a few but I would like opinions of those of you that have them installed. I feel it's a must have when doing your interior but that's just me. Thanks everyone!!! __________________

12-05-2020, 09:40 AM	#3
ADVMax Sporting Foole Drives: 2010 Camaro SS Join Date: Sep 2019 Location: Alabama Posts: 500	My quest was function over form or cost. The stock pedal arrangement didn’t allow for comfortable heel/toe on downshift. These were some $12.00 cheap-ass covers from Auto Zone. This was an early mockup photo, final mounting was 3M tape to hold them in lace then screwed down. For my purposes they work perfect and don’t look terrible. If cost is the question I’ve seen some stupid expensive ones that were ass ugly. Attached Images

12-05-2020, 11:01 AM	#4
sinlinson 2016 2SS Convertible Drives: 2011 Camaro 2SS convertible Join Date: May 2019 Location: NY Posts: 85 View My Garage	I got this Drake 3 peice set of Ebay for $81.00. Fits well and looks good. I used the orange inserts to match my interior. There is also a carbon fiber looking insert included. Easy instalation. Brake and clutch peddel are bolt on, no drilling. Gas peddle was drill and bolt on. The top screw was too short, but other than that it was a good install. I've already been told about my dirty carpet!!!!! Attached Images

12-05-2020, 11:22 AM	#5
gm2376 Drives: 2010 Black 2ss Camaro SS Join Date: May 2010 Location: Rochester Hills, MI Posts: 1,060	no offense, but those are all fugly looking...i would only do these in heel to toe.....but just my opinion. https://www.srpracing.com/pd_camaro_...ing_pedals.cfm __________________ ZL1 10 spokes,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 102mm TB, Dr Phil Tune,Borla Atak

12-07-2020, 07:21 PM	#6
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 544	^ those are the ones i have. Tad expensive, but worth it __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

12-05-2020, 07:52 AM	#2
camguynj Drives: '13 SS/RS LS3 BRM Cammed NPP Join Date: Jan 2013 Location: NJ Posts: 3,810 View My Garage	Check these out. Black or polished billet aluminum. I’ve got the black https://www.rpidesigns.com/shop/item...RoC0A4QAvD_BwE

12-07-2020, 10:37 PM	#7
Silveradoss573 Drives: Camaro 1LE Join Date: May 2018 Location: USA Posts: 1,348	I installed the gm pedal covers. They just look right to me but do nothing to help with heel/toe.