07-07-2020, 10:13 AM | #1 |
Drives: Canadian 2019 BLACK ZL1 Join Date: Feb 2020
Location: Bourges (France)
Posts: 412
|
Something wrong
I opened thé engine hood and I found it like that... 😡
May I have to plug it ? No risk to have an error code ? Thanks |
07-07-2020, 10:16 AM | #2 |
Petro-sexual
|
Just plug that back onto that little tube
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
07-07-2020, 11:20 AM | #3 |
雪の玉
Drives: '22 Z71 RST Silverado Join Date: Feb 2011
Location: South
Posts: 3,415
|
May not have been seated all the way. I've seen those look like they're on ok but only to come off at slightest tug. Just put it back and make sure it clicks when pushing it on and give it a tug to make sure.
|
07-07-2020, 03:47 PM | #4 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
push on...click it
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
07-07-2020, 04:07 PM | #5 |
Drives: Canadian 2019 BLACK ZL1 Join Date: Feb 2020
Location: Bourges (France)
Posts: 412
|
Ok guys.. thought it was more important
It’s been disconnected when they made thé French homologation Thanks a lot |
|
|
Post Reply
|
|
|