Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 03-21-2020, 01:05 PM   #1
n12k1
 
Drives: V6 2LT Camaro Overkilled
Join Date: Jun 2018
Location: Sofia
Posts: 18
Wiring diagram for the LED tail lights

Hi, is there someone who has a wiring diagram of the LED tail lights, which are used on the RS,SS and ZL1 models? On the plug i see 6 pins, I found out that there are two grounds, one positive for the reverse light, one for the brake/turn light and one for the actual tail light, but have no idea where does the 6th go.
Attached Images
 
n12k1 is offline   Reply With Quote
Old 03-21-2020, 01:23 PM   #2
Trochoidal

 
Drives: 2017 Camaro 2SS A8
Join Date: May 2019
Location: USA
Posts: 780
Here’s a thread discussing your topic. It may give you the answer you desire.

https://www.camaro6.com/forums/showthread.php?t=549679
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, My custom vent gauge pod
Trochoidal is offline   Reply With Quote
Old 03-22-2020, 07:06 AM   #3
n12k1
 
Drives: V6 2LT Camaro Overkilled
Join Date: Jun 2018
Location: Sofia
Posts: 18
Quote:
Originally Posted by Trochoidal View Post
Here’s a thread discussing your topic. It may give you the answer you desire.

https://www.camaro6.com/forums/showthread.php?t=549679

The guy is having the same problem as I am, but the thread ends there.
n12k1 is offline   Reply With Quote
Old 03-23-2020, 05:11 PM   #4
Oramac2016
 
Oramac2016's Avatar
 
Drives: 2016 Camaro RS
Join Date: May 2016
Location: Louisiana
Posts: 383
Quote:
Originally Posted by n12k1 View Post
The guy is having the same problem as I am, but the thread ends there.
What problem are you having?
__________________
2016 Summit White 1LT RS, Brembo Brakes, NPP Exhaust,Front Glowtie, Rear Red Glowtie, Adrenaline Red Interior
Oramac2016 is offline   Reply With Quote
Old 03-24-2020, 09:29 AM   #5
n12k1
 
Drives: V6 2LT Camaro Overkilled
Join Date: Jun 2018
Location: Sofia
Posts: 18
Quote:
Originally Posted by Oramac2016 View Post
What problem are you having?
Well I wanted to have tail lights with yellow/orange turn signals, so i purchased EU version tail lights. But i didn't know that the EU camaro use the revese light as a turn signal and so the wiring is different for the US and EU models and now I get hyper flashing when i use the turn signals, even though my stock tail lights are LED.


https://drive.google.com/file/d/17C8...4fb83e5f2jsN8i


On the attached picture you can see one of the pins is missing on the new tail lights
Attached Images
 
n12k1 is offline   Reply With Quote
Old 04-06-2020, 12:27 PM   #6
h018871
Geoff
 
h018871's Avatar
 
Drives: 2020 ZL1 Green
Join Date: May 2013
Location: Houston
Posts: 1,510
These are for a 2019, but they should be the same
Attached Images
File Type: pdf X410.pdf (439.8 KB, 196 views)
File Type: pdf X420.pdf (437.6 KB, 162 views)
__________________
h018871 is offline   Reply With Quote
Old 04-06-2020, 01:08 PM   #7
n12k1
 
Drives: V6 2LT Camaro Overkilled
Join Date: Jun 2018
Location: Sofia
Posts: 18
Quote:
Originally Posted by h018871 View Post
These are for a 2019, but they should be the same
Thanks for the response! I figured out that the problem is that on my new tail lights i am missing the "turn lamp feedback signal", which i have no idea how to simulate on the new lights.
n12k1 is offline   Reply With Quote
Old 04-06-2020, 06:11 PM   #8
h018871
Geoff
 
h018871's Avatar
 
Drives: 2020 ZL1 Green
Join Date: May 2013
Location: Houston
Posts: 1,510
Best guess is that you'll get a message that the lamp is out.
__________________
h018871 is offline   Reply With Quote
Old 08-12-2020, 05:17 AM   #9
Peter10654
 
Drives: Camaro 2SS 1LE 2019
Join Date: Aug 2020
Location: Germany / Munich
Posts: 5
Quote:
Originally Posted by n12k1 View Post
Thanks for the response! I figured out that the problem is that on my new tail lights i am missing the "turn lamp feedback signal", which i have no idea how to simulate on the new lights.
You have to install a resistor to say the body control module everything is fine. Maybe the guys from gen5diy can help you

Peter
Peter10654 is offline   Reply With Quote
Old 08-16-2020, 05:34 PM   #10
Peter10654
 
Drives: Camaro 2SS 1LE 2019
Join Date: Aug 2020
Location: Germany / Munich
Posts: 5
Quote:
Originally Posted by h018871 View Post
These are for a 2019, but they should be the same
Hey mate. Do you have maybe also wiring diagram from the reverse lights connector from the 2019 model? I need to build a custom harness and it would help to identify the type of connector.

Thanks

Peter
Peter10654 is offline   Reply With Quote
Old 08-17-2020, 05:56 AM   #11
n12k1
 
Drives: V6 2LT Camaro Overkilled
Join Date: Jun 2018
Location: Sofia
Posts: 18
Quote:
Originally Posted by Peter10654 View Post
You have to install a resistor to say the body control module everything is fine. Maybe the guys from gen5diy can help you

Peter
Contacted them but they had no clue about it
n12k1 is offline   Reply With Quote
Old 08-17-2020, 11:46 AM   #12
h018871
Geoff
 
h018871's Avatar
 
Drives: 2020 ZL1 Green
Join Date: May 2013
Location: Houston
Posts: 1,510
Quote:
Originally Posted by Peter10654 View Post
Hey mate. Do you have maybe also wiring diagram from the reverse lights connector from the 2019 model? I need to build a custom harness and it would help to identify the type of connector.

Thanks

Peter
They use the same connectors, x410 & x420, pin 4 for the signal. For European models one of them is the rear fog lamp

Hope this helps
__________________
h018871 is offline   Reply With Quote
Old 09-26-2020, 08:06 AM   #13
Peter10654
 
Drives: Camaro 2SS 1LE 2019
Join Date: Aug 2020
Location: Germany / Munich
Posts: 5
Quote:
Originally Posted by h018871 View Post
They use the same connectors, x410 & x420, pin 4 for the signal. For European models one of them is the rear fog lamp

Hope this helps
Thanks mate,

yes I found it and could convert everything I need.

Thanks

Peter
Peter10654 is offline   Reply With Quote
Old 12-19-2020, 05:00 AM   #14
MakCamaro
Makis
 
MakCamaro's Avatar
 
Drives: Camaro ZL1 A10
Join Date: Apr 2019
Location: London - UK
Posts: 361
Quote:
Originally Posted by h018871 View Post
These are for a 2019, but they should be the same
Very useful, especially for European models that miss the side markers and the DRLs.

Do you or someone else have a similar diagram, but for the headlights? I am trying to figure out which wire in the headlight to tap into in order to fit aftermarket fog DRLs.

Thanks

Last edited by MakCamaro; 12-20-2020 at 04:48 AM.
MakCamaro is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.