[Daddy_OZL1]

Originally Posted by arpad_m

Shouldn't be a problem and will look & ride a tiny bit better. See the comparison of the fronts below, rears are very similar.

Thanks brother
Merry Christmas

[TP2SS]

Originally Posted by arpad_m

Shouldn't be a problem and will look & ride a tiny bit better. See the comparison of the fronts below, rears are very similar.

Arpad,
What is the website where you screenshot this comparison?
Thx

[Redwings1]

Bought a LT-1 and haven't gotten it home yet. The dealer is suppose to put 9.5 on all 4 corners with stock tires. Then I'm going to put Michelin Pilot A/S 3's 285/35-20 on al four corners. They say it with work. What say you guys?

[arpad_m]

Originally Posted by TP2SS

Arpad,
What is the website where you screenshot this comparison?
Thx

https://www.wheel-size.com

(Sorry for the late response, I've only just seen your question )

[Msquared]

Rear SS wheels are 9.5" with 39mm offset. Fronts are 8.5 with 20mm offset. I think you're likely to need spacers if you try to run the rears on the front.

[Crushin_LT1]

Originally Posted by Msquared

Rear SS wheels are 9.5" with 39mm offset. Fronts are 8.5 with 20mm offset. I think you're likely to need spacers if you try to run the rears on the front.

Do you know what size spacer?

[Msquared]

Originally Posted by Crushin_LT1

Do you know what size spacer?

No, I don't. You'd have to try fitting one to see if clears everything. What I can tell you is that SS rear has 1/2" more backspacing than a front 1LE wheel, and the front 1LE is pretty close to touching. So you're likely to need at least 1/4" and possibly up to 1/2". There's nothing inherently wrong with running plain spacers, but at those thicknesses you'd need to install longer wheel studs up front.