Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 07-15-2021, 03:39 PM   #1
cajunzl1
 
Drives: 2018 ZL1
Join Date: Jun 2020
Location: Louisiana
Posts: 80
Will I run out fuel ? IF

Currently have a Rotofab and Ported TB, going to add the following:

Kong Port job with 2.3 Pulley, and E85 Sensor. Can i run a mixture like E60 and still have enough fuel pressure?

Thanks
cajunzl1 is offline   Reply With Quote
Old 07-15-2021, 03:42 PM   #2
atljar
 
Drives: C7 Z06
Join Date: Jul 2021
Location: Mason, OH
Posts: 11
No you wont have enough fuel for E60
__________________
The 'Cooler Bleeder - www.coolerbleeder.com
Fully automated CAC / intercooler bleeding system

2015 Corvette Z06/7 - Mods in progress
2006 Corvette Z06 -Bolt ons + Darin Morgan heads Sold
1997 Corvette - Baby cam and bolt ons Sold
1994 Camaro Z28 - 383/AFR's/Single Plane Sold
atljar is offline   Reply With Quote
Old 07-15-2021, 06:28 PM   #3
NOVAtwinLS3
 
NOVAtwinLS3's Avatar
 
Drives: 2018 ZL1
Join Date: Nov 2012
Location: Jax Florida
Posts: 66
I asked Complete Street Performance same question have mods similar to you, they said it’s a no go.
__________________
CSP 755 Package. 2” headers, Kong ported blower, NW103mm TB, RF Big Gulp, Mighty Mouse catch can.
630rwhp/660rwtq.
NOVAtwinLS3 is offline   Reply With Quote
Old 07-15-2021, 07:23 PM   #4
Camaro1973

 
Camaro1973's Avatar
 
Drives: 2019 ZL1
Join Date: Mar 2019
Location: NJ
Posts: 1,534
Quote:
Originally Posted by cajunzl1 View Post
Currently have a Rotofab and Ported TB, going to add the following:

Kong Port job with 2.3 Pulley, and E85 Sensor. Can i run a mixture like E60 and still have enough fuel pressure?

Thanks
Scratch the pulley. Should be able to run e-50. Take a look at teds package.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE

LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90
Camaro1973 is offline   Reply With Quote
Old 07-15-2021, 08:53 PM   #5
CW3SF

 
CW3SF's Avatar
 
Drives: 2019 Chevy Camaro ZL1 M6
Join Date: Jul 2019
Location: Sea level
Posts: 1,252
Add a JMS booster and then your tuner can test to see how much e you can blend. I’d guess e40-e50. I’m on e70
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
CW3SF is offline   Reply With Quote
Old 07-15-2021, 08:57 PM   #6
cajunzl1
 
Drives: 2018 ZL1
Join Date: Jun 2020
Location: Louisiana
Posts: 80
Thanks, but starting to realize the E85 stations are scarce in my area, just a few nearby have E15 only.

May just stick with a port and pulley...
cajunzl1 is offline   Reply With Quote
Old 07-15-2021, 09:20 PM   #7
Markoz28

 
Drives: 18 ZL1 nightfall grey A10
Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
Quote:
Originally Posted by cajunzl1 View Post
Thanks, but starting to realize the E85 stations are scarce in my area, just a few nearby have E15 only.

May just stick with a port and pulley...
Add headers to the mix. Makes a big difference.
Markoz28 is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:27 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.