07-18-2014, 08:14 PM | #1 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
Delete
Delete, sold
Last edited by edgehead2000; 10-01-2014 at 10:17 PM. |
07-20-2014, 07:27 PM | #2 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
Bump
|
08-20-2014, 09:31 AM | #3 |
Drives: 2011 Camaro SS/RS Join Date: Feb 2011
Location: corpus christi tx
Posts: 1,046
|
pm sent
__________________
SLP TVS 2300- 1 7/8 LG Headers- RDS NX Plate- 75 Shot- No Cats- SLP Loudmouth 2- NW102- 3.8 Pulley- OD Cog drive-12lbs boost-FIC 80# injectors-ZL1 Fuel Pump- RotoFab CAI- Apex CAI Scoop- Pat G Tune- Weld RTS drag pack- BMR Trailing Arms- BMR 1'' Drop Springs-BMR Lower Control Arms- BMR Toe Rods- BMR Rear Cradle Bushings- BMR Upper Control Arm Bushings- BMR Extreme Anti- Rollbar- Hotchkis Subframe Brace- Prosport Evo Boost & F/A Ratio
|
08-20-2014, 10:46 PM | #4 |
SparkyDL75
|
How did the tires perform in dry conditions? I tavoid wet weather so I'm not really worried about wet performance. I am considering getting a set when they finally release the 305/35r20 sizes.
__________________
2010 CGM 2SS/RS M6 LS3 Black/Gray
Exterior American Racing BLVD Black w/Machined(20x10) Mickey Thompson Street Comps(275/40 & 305/35) Suspension Pedders Pace Car Pkg w/ZL1 Upgrade; Pedders Upper & Lower Control Arm, Steering, & Differential Mount Bushings; Pedders SS Brake Lines; Pedders Dual Bearing Camber Plates; ZL1 Toe Link; Hawk Performance Ceramic brake pads Drivetrain Maggie2300(8psi-3.4pulley); CompCam; 85lb injectors; ZL1 fuel pump; ZR1 MAP; Centerforce DYAD Twin Disc clutch; Stainless Works LT headers; QTP Cutouts; Rotofab intake; RX catch can; Mike Norris tune 643rwhp 598 rwtq |
08-21-2014, 08:22 AM | #5 |
Echale Gas [COTW 3/10/14]
Drives: 2010 Camaro SS/RS Supercharged Join Date: Aug 2010
Location: La Puente, Ca
Posts: 1,372
|
These are badass! One of the best I have ran on my car.
__________________
Kenne Bell 502 rwhp/ 471 rwtq at 9psi (daily driver...for now) Performance: Corsa catback, JRE Super Tensioner, dual pass heat exchanger, R1 slotted & Dimpled rotors cryogenically treated Cosmetic: Giovanna kilis 22", zl1 mailslot bumper, Custom Emblem Pro Badge, painted calipers |
08-21-2014, 05:47 PM | #6 |
Drives: 2011 Camaro SS/RS Join Date: Feb 2011
Location: corpus christi tx
Posts: 1,046
|
pm sent again
__________________
SLP TVS 2300- 1 7/8 LG Headers- RDS NX Plate- 75 Shot- No Cats- SLP Loudmouth 2- NW102- 3.8 Pulley- OD Cog drive-12lbs boost-FIC 80# injectors-ZL1 Fuel Pump- RotoFab CAI- Apex CAI Scoop- Pat G Tune- Weld RTS drag pack- BMR Trailing Arms- BMR 1'' Drop Springs-BMR Lower Control Arms- BMR Toe Rods- BMR Rear Cradle Bushings- BMR Upper Control Arm Bushings- BMR Extreme Anti- Rollbar- Hotchkis Subframe Brace- Prosport Evo Boost & F/A Ratio
|
08-21-2014, 10:06 PM | #7 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
The tires are great for dry conditions, on a couple cruises around NM this summer they hugged the road more as they got warmer.
At the moment, I only want to sell all 4 tires as a set. |
08-30-2014, 09:34 AM | #8 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
Still available! $600 obo
|
08-30-2014, 02:18 PM | #9 |
Drives: 2011 Camaro SS/RS Join Date: Feb 2011
Location: corpus christi tx
Posts: 1,046
|
Pics?
__________________
SLP TVS 2300- 1 7/8 LG Headers- RDS NX Plate- 75 Shot- No Cats- SLP Loudmouth 2- NW102- 3.8 Pulley- OD Cog drive-12lbs boost-FIC 80# injectors-ZL1 Fuel Pump- RotoFab CAI- Apex CAI Scoop- Pat G Tune- Weld RTS drag pack- BMR Trailing Arms- BMR 1'' Drop Springs-BMR Lower Control Arms- BMR Toe Rods- BMR Rear Cradle Bushings- BMR Upper Control Arm Bushings- BMR Extreme Anti- Rollbar- Hotchkis Subframe Brace- Prosport Evo Boost & F/A Ratio
|
09-01-2014, 06:47 PM | #10 |
Drives: 2010 Camaro SS2 Join Date: Jan 2014
Location: Ft worth, tx
Posts: 44
|
Would you sell just the rears?
|
09-01-2014, 09:06 PM | #11 |
Drives: 2012 Camaro SS/RS Join Date: Aug 2014
Location: Prairieville, La
Posts: 36
|
If he will I might be interested in the fronts.
|
09-27-2014, 11:25 AM | #12 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
PM's being sent to you two guys for splitting the set
|
09-28-2014, 09:06 PM | #13 |
Drives: 2010 Camaro 1SS/RS RJT Join Date: Jan 2010
Location: NJ
Posts: 831
|
Also interested in the fronts if willing to split
__________________
2010 Camaro SS LS3 Holley Hi-Ram Manifold,Custom grind boost cam,Vortech V-3,10Rib 3.47 Pully Airfilter Pipe Delete, 10 PSI, TSP LT Headers, Flowmaster Outlaws, Alky Control Meth Kit, PFADT 1.25, ZL1 Fuel Pump, DSS 1000HP axles, Mantic ER2 Clutch, Full BMR rear suspension drag pack upgrade. C6 Vette 18 rims with M/T 305 out back. COPO Hood
Race Proven Motorsports tuned |
10-01-2014, 10:17 PM | #14 |
2016 Camaro 1LT 2.0T
Drives: Nemesis Join Date: Feb 2011
Location: Albuquerque, NM
Posts: 844
|
Sold, please delete
|
|
|
|
|