You are browsing camaro6 
06-21-2018, 12:27 PM
|
#1 |
 Drives: Bright Yellow 1SS Join Date: Jun 2018
Location: Texas
Posts: 4
|
Wheel Help!!!
I just purchased a 2017 1SS. I love the classic look of the Ridler 695 wheels. Bigwheels.net say they'll fir but I'm not home to measure them. Does anyone have these wheels? Given these numbers on the pick does anyone have any ideas if they'll work? I've been researching this and there's almost too much info out there.
Front: 8.5X20 Bolt: 5X120 Offset: 34MM Rear: 10X20 Bolt: 5X120 Offset: 38MM |
|
|
|
06-21-2018, 12:32 PM
|
#2 | |
  
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
Quote:
20x10 rear will be fine but then you may want to check caliper clearance as well/ |
|
|
|
|
|
06-21-2018, 01:03 PM
|
#3 |
|
Drives: Bright Yellow 1SS Join Date: Jun 2018
Location: Texas
Posts: 4
|
When you order all four it comes with a hub spacer. And you'll have to forgive me, this wheel fitment is all new to me. I just don't want to drop a load of cash on a set of wheels and not have them fit or rub. I like the AR torq thrusts too. And I work overseas so I can't measure anything now.
|
|
|
|
|
06-21-2018, 01:16 PM
|
#4 |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
To run a thick spacer up front you will also need to install longer studs....how much do you really like these wheels?
 The rears will poke out about 7mm more. And the fronts will be set in about 9mm. To make it approximately even, you would have also add the 9mm back and the 7mm. So a 16mm spacer. So 10-12mm at a minimum...but 14-16 best. 2 cents. Ciao
__________________
|
|
|
|
|
06-21-2018, 01:39 PM
|
#5 |
|
Drives: Bright Yellow 1SS Join Date: Jun 2018
Location: Texas
Posts: 4
|
What are all of the stock front and rear wheel dimensions, width, offset, backspacing etc?
|
|
|
|
|
06-21-2018, 02:46 PM
|
#6 |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
SS stock
20x8.5 25mm offset 20x9.5 39mm offset.
__________________
|
|
|
|
|
06-21-2018, 03:47 PM
|
#7 |
|
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
you will need these in about a 15mm/ will be hub centric and you will not need to get longer studs. but like mentioned before if you really really love the wheels go for it but is not worth putting on some wheels that are not meant for your vehicle.
|
|
|
|
|
06-22-2018, 01:01 PM
|
#9 |
|
Drives: Bright Yellow 1SS Join Date: Jun 2018
Location: Texas
Posts: 4
|
Thanks for the help. I love them but 15MM is a lot. I guess I'll look for another.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
