Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Dragstrip and Launching Discussion


Bigwormgraphix


Post Reply
 
Thread Tools
Old 03-21-2017, 03:27 PM   #29
mlee
CamaroFans.com
 
mlee's Avatar
 
Drives: ZLE & ZR2
Join Date: Oct 2008
Location: Conroe, TX
Posts: 37,507
Quote:
Originally Posted by Snowblind View Post
MLEE according to my calculations and a 6500 rpm limit a 26.7 stock tire on the A10 (2.85 final) will have a speed of 101 in 4th and 119 in 5th. A 28.8 tire changes the speed in gears to 109 in 4th and 129 in 5th.





Factory setting is 6500
Thanks... so I'll be in 6th gear at 1/4 mile stock and 5th gear with 28.8 tires
__________________
mlee is offline   Reply With Quote
Old 03-25-2017, 08:59 AM   #30
avacamaro
avacamaro
 
avacamaro's Avatar
 
Drives: 2016 silver SS
Join Date: Apr 2012
Location: south west PA
Posts: 100
I also went the inexpensive route on wheels and used a C6 zo6 style wheel in a 18x10.5. I test fit the wheels they fit perfectly and look good for $130 each.

I had the same dilemma and ended up using 305-40-18 in the MT ET SS tire. I wanted the R's but the 305-40-18 is closer to stock size.

If you want to lower the effective gearing slightly, go with the 305/35, if you want a slightly taller effective gear go with the 305/45. Or chose to keep stock gearing and go with the 305/40.

You should be able to come out harder with the 305/35 if you have enough traction.







How about an offset for the wheels? What are you all running with the c6 Z06 rims.
Thanks
avacamaro is offline   Reply With Quote
Old 03-25-2017, 09:36 AM   #31
1LE Red Dragon
Train Driver
 
Drives: 2018 Summit White ZL1 1LE
Join Date: Jun 2013
Location: Lincolnton, NC
Posts: 588
I think it's a 56 offset. They only make one offset for the replica one wheels.
1LE Red Dragon is offline   Reply With Quote
Old 03-25-2017, 03:09 PM   #32
bybcous


 
bybcous's Avatar
 
Drives: 2016 Hyper Blue 1SS
Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
Got no lower than a 1.9 today, something is going on with my rear end, my car would not stay straight during burnout, i would get really sideways, dont know what was up. Anyways I picked up .2 tenths from my best, only made 2 passes it was so packed. First run was 12.00 second was 11.7
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails.
Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp
Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85
DELIVERED 12/29/15
http://youtube.com/bybcous " no talking only racing on my youtube"
bybcous is offline   Reply With Quote
Old 03-25-2017, 07:31 PM   #33
PRAY


 
PRAY's Avatar
 
Drives: 2016 2SS
Join Date: Jul 2016
Location: Sanford NC
Posts: 2,766
Quote:
Originally Posted by bybcous View Post
Got no lower than a 1.9 today, something is going on with my rear end, my car would not stay straight during burnout, i would get really sideways, dont know what was up. Anyways I picked up .2 tenths from my best, only made 2 passes it was so packed. First run was 12.00 second was 11.7
Welcome to the rear end club brother. Sorry it isn't working out for you. The DA was +1,250 down here today. Not sure what it was up there but you weren't going to set the world on fire today. That's for sure.
__________________
2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.
PRAY is offline   Reply With Quote
Old 03-25-2017, 07:34 PM   #34
PRAY


 
PRAY's Avatar
 
Drives: 2016 2SS
Join Date: Jul 2016
Location: Sanford NC
Posts: 2,766
Quote:
Originally Posted by bhillakaiceberg View Post
Stock tires..

Front: 245/40/20

Rear: 275/35/20
I have gone back and forth with guys on this. The stock TCM/ECM is tracking the stock rear tire at 26.83". If you lay a straight edge on it with it on the car at proper air pressure it is 26.83". If you look at the scanner during shifts they coenside with the tire being 26.83" tall. Yes I understand what the calculator says but nothing lines up to that in the car.
__________________
2016 2SS. H/C SBE 1.37 60ft, 6.36@109.49, 9.97@136+. Nuff Said.
PRAY is offline   Reply With Quote
Old 03-26-2017, 01:17 PM   #35
bybcous


 
bybcous's Avatar
 
Drives: 2016 Hyper Blue 1SS
Join Date: Jul 2015
Location: hampton roads
Posts: 2,763
__________________
1ss/Auto-Hyper Blue
acs carbon flash spoiler, bmr springs, gm clear tails.
Texas speed cam, 223/227 .635/.635 116 LSA, Kooks Long Tube Headers with green cats, MSD Atomic Air Force Intake, CAI Cold Air Intake, QTP cutouts. 503 hp
Best so far 11.5 at 123 with a 1.83 60ft. BMR lower and upper trailing arms and upper control arms,E85
DELIVERED 12/29/15
http://youtube.com/bybcous " no talking only racing on my youtube"
bybcous is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.